SAE AMS 5045 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL, SHEET AND STRIP, 0.25 CARBON, MAXIMUM HARD TEMPER
Hardcopy , PDF
29-04-2019
English
01-01-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a carbon steel in the form of sheet and strip.
| Committee |
AMS-E
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 1428 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
| SAE AMS 1536 : 2008 | CLEANER FOR AIRCRAFT COMPONENTS COLD TANK TYPE, SOLVENT-BASE |
| SAE AMS 1374 : 2004 | REMOVER, POLYURETHANE/EPOXY PAINT, ALKALINE, HOT-TANK TYPE |
| SAE AMS 1540 : 2015 | CLEANER, THRUST REVERSER, WATER-BASE |
| SAE AMS 2516F : 2013(S2018) | POLYTETRAFLUOROETHYLENE (PTFE) RESIN COATING, HIGH BUILD, 698 TO 752 DEGREES F (370 TO 400 DEGREES C) FUSION |
| SAE AMS 1526 : 2008 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE |
| SAE AMS 1453 : 2015 | DISINFECTANT CLEANER FOR AIRCRAFT INTERIOR GENERAL PURPOSE LIQUID |
| SAE AMS 1424 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
| SAE AMS 1545 : 2015 | CLEANER, THRUST REVERSER, ALKALINE, WATER-BASE |
| SAE AMS 1370 : 2008 | COMPOUND, RUST REMOVER, LIQUID, AIRCRAFT AND AEROSPACE COMPONENTS, IMMERSION TANK METHOD |
| SAE AMS 1426 : 2016 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS GLYCOL BASE |
| SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
| SAE AMS 1551 : 2008 | CLEANER, TURBINE ENGINE GAS PATH AQUEOUS TYPE |
| SAE AMS 1432 : 1995 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS, POTASSIUM ACETATE BASE |
| SAE AMS 1431 : 2012 | COMPOUND, SOLID RUNWAY AND TAXIWAY DEICING/ANTI-ICING |
| SAE AS 1613 : 2012 | IMAGE QUALITY INDICATOR, RADIOGRAPHIC |
| SAE AMS 1371 : 2007 | COMPOUND, RUST REMOVER, SOLID/POWDER AIRCRAFT AND AEROSPACE COMPONENTS, IMMERSION TANK METHOD |
| SAE AS 269J:2012:(S2018) | IDENTIFICATION OF MATERIAL FOR AN, MS AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS |
| SAE AMS 7295 : 1993 | RADIOGRAPHIC FILM AND PAPER, INDUSTRIAL GRADE |
| SAE AMS 1659 : 1991 | COATING, SOIL BARRIER, SEMI-PERMANENT |
| SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
| SAE AMS 1435 : 2012 | FLUID, GENERIC, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS |
| SAE AMS 2515H : 2013 | POLYTETRAFLUOROETHYLENE (PTFE) RESIN COATING, LOW BUILD, 370 TO 400 DEGREES C (698 TO 752 DEGREES F) FUSION |
| SAE AMS 2370 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CARBON AND LOW-ALLOY STEEL WROUGHT PRODUCTS AND FORGING STOCK |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| SAE AMS 2232 : 2016 | TOLERANCES CARBON STEEL, SHEET, STRIP, AND PLATE |
| SAE AMS 2807B : 2012 | IDENTIFICATION, CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, SHEET, STRIP, PLATE, AND AIRCRAFT TUBING |
| SAE AMS 2259 : 2012 | CHEMICAL CHECK ANALYSIS LIMITS, WROUGHT LOW-ALLOY AND CARBON STEELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.