SAE AMS5647K
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated
Available format(s)
Hardcopy , PDF
Superseded date
08-09-2021
Superseded by
Language(s)
English
Published date
01-02-2017
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.
| Standards | Relationship |
| QQ-S-763 Revision F:1996 | Similar to |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| SAE AS4388 | Hose Assembly PTFE Heavy Duty, -65 To 400 °F (-55 To 204 °C) 8000 psi (56 000 kPa) Hydraulic and Pneumatic |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| MS27637 Revision C:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
| MS27630 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, 45 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| ISO 8913:2006 | Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| SAE AS4468G | Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification |
| SAE MA4098 | Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 204 °C, 35 000 kPa Hydraulic and Pneumatic, Metric |
| MS27628 Revision B:2009 | ELBOW, FLARED, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
| SAE AS5960B | Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems |
| MS27627 Revision B:2009 | ELBOW, FLARED, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
| SAE AS4604B | Hose Assembly, 3000 psi, Polytetrafluoroethylene, Metallic Reinforced, 400 °F, Heavy Duty, Aircraft Hydraulic Systems |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MS27631 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, 90 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT |
| SAE AS5951D | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| MS27636 Revision B:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
| SAE AS4098A | Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 400 °F, 5000 psi Hydraulic and Pneumatic |
| SAE MA1975 | Hose Assemblies, Polytetrafluoroethylene, Aramid Reinforced, 135 °C, Standard Duty, 28 000/21 000 kPa, Hydraulic, Aircraft Systems |
| SAE J24714_200110 | Fluid Systems—Connector Tubes—General Specification and Part Standard |
| SAE MA614A | Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 °C, Hydraulic, Metric |
| SAE MA2126B | Hose Assembly, Polytetrafluoroethylene (PTFE), up to 232 °C and 10 500 kPa Procurement Specification, Metric (ISO/DIS 10502) |
| NASA SSTD 8070 0122 : 2014 | PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL |
| MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| SAE AS269J | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts |
| MIL-DTL-5070 Revision F:2006 | ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
| SAE MA1339 | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 21,000 kPa, 204 °C, Lightweight, Hydraulic and Pneumatic, Metric |
| SAE AS1339H | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic |
| SAE AS1227C | Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 °F, Aircraft |
| SAE AS4897 | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for |
| SAE AS5420G | Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
| SAE AIR5693 | Compatibility of PTFE Hose Assemblies With Typical Fluids Found in Aerospace Applications |
| MS27629 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, STRAIGHT, TUBE TO HOSE-WITH SWIVEL NUT |
| SAE AS4623E | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3,000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems |
| SAE AS604E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic |
| NASM 21083 : 2004 | NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F |
| SAE AS614D | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 °F, Heavy Duty, Hydraulic and Pneumatic |
| SAE MA4623 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| SAE AS1946E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic |
| SAE AS4897A | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for |
| SAE AMS2241S | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| SAE AMS 2806D : 2013 | IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS |
| SAE AMS2371K | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock |
| SAE ARP 1917 : 2002 | CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AMS2374E | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steel and Alloy Forgings |
| SAE AMS2808E | Identification Forgings |
| SAE AMS7490Q | Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation-Hardenable Alloys |
| SAE AMS2243K | Tolerances Corrosion and Heat-Resistant Steel Tubing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.