SAE ARP1917A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Clarification of Terms Used in Aerospace Metals Specifications
Hardcopy , PDF
16-12-2021
English
16-07-2013
1 SCOPE
2 REFERENCES
3 TERMS
Describes terms used in Aerospace materials and process specifications.
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Aerospace Recommended Practice (ARP) clarifies terms used in Aerospace materials and process specifications. The terms clarified in this ARP are not intended to supersede those terms for which clarification is already provided in existing specifications.
SAE AMS1428L | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
SAE AMS2428A | Plating, Cobalt-Phosphorus, Nanocrystalline |
SAE AMS4611J | Brass, Naval, Bars and Rods 60.5Cu - 38.7Zn - 0.8Sn Half Hard (H02) |
SAE AMS4063F | Aluminum Alloy, Clad One Side, Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed |
SAE AMS4554C | Brass Tubing, Seamless 66.5Cu - 33Zn - 0.45Pb Annealed |
SAE AMS5607G | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 73Ni - 7.0Cr - 16.5Mo Solution Heat Treated |
SAE AMS2429E | Plating, Bronze Nitriding Stop-off 90Cu - 10Sn |
SAE AMS4713G | Brass, Wire 65Cu - 35Zn Eighth-Hard (H00) |
SAE AMS5744F | Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Heat Treated, 170 ksi (1172 MPa) Tensile Strength |
SAE AMS4505L | Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Annealed (OS035) |
SAE AMS5029E | Steel, Welding Wire 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)(4335 Mod) Vacuum Melted, Environment Controlled Packaging |
SAE AMS6949A | Titanium Alloy, Sheet and Strip 4Al - 2.5V - 1.5Fe Electron Beam Single Melted. Annealed |
SAE AMS5609E | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 12Cr - 0.12Cb (Nb) (410 Modified) Ferrite Controlled, Annealed |
SAE AMS5754N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated |
SAE AMS4402B | Aluminum Alloy, Extruded Profiles (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn Annealed, Stretch Formed, Solution Heat Treated and Stress Relieved by Stretching |
SAE AMS4700E | Copper Wire, Bare High Purity |
SAE AMS5922C | Steel, Corrosion-Resistant, Bars, and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed |
SAE AMS2224H | Tolerances Copper and Copper Alloy Wire |
SAE AMS3379A | Sealing Compound, Polysulfide Rubber Performed Strips for Sealing Removable Doors, Skins, and Panels |
SAE MAM2304C | Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement |
SAE AMS2301K | Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure |
SAE AMS2303F | Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure |
SAE MAM2301C | Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement |
SAE AMS2304B | Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure |
SAE MAM2303E | Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement |
SAE MAM2300D | Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure, Metric (SI) Measurement |
SAE AMS2300L | Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.