SAE AS50151C
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Connectors, Electrical, Circular Threaded, AN Type, General Specification For
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
17-07-2015
Publisher
Superseded date
30-10-2019
Superseded by
€166.00
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES
Specifies circular threaded electrical connectors with solder or removable crimp contacts (both front and rear release).
| DevelopmentNote |
Supersedes MIL DTL 5015 (H). (01/2010)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers circular threaded electrical connectors with solder or removable crimp contacts (both front and rear release). These connectors are for use in electronic, electrical power, and control circuits (see 6.1).
| MIL-DTL-83723-23 Revision D:2003 | Connectors, Electrical, (Circular, Environment Resisting), Plug, (Threaded Coupling, Crimp Socket Contacts), (Series II, Classes A, G, K, and R) |
| MIL-DTL-83528-4 Revision G:2018 | Gasketing Material, Conductive, Shielding Gasket, Electronic, EMI/RFI, Connector Flange Mount |
| MIL-DTL-22438 Revision C:2012 | Panels, Receptacle, for Electrical and Electronics Test and Maintenance Table, General Specification for |
| MIL-STD-1651 Revision B:2015 | Insert Arrangements for SAE-AS50151, MIL-DTL-22992 (Classes C, J, and R), MIL-DTL-83723 (Series II), and SAE-AS95234 Circular Electrical Connectors |
| DSCC 89017 : D | CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREES, CATEGORY 3C, FOR MIL-DTL-83723 SERIES 3, SAE-AS50151 (SAE-AS34001 AND AS34501), SAE-AS81703 SERIES 3, AND MIL-DTL-26482 SERIES 2 |
| SAE AS95234 | Connectors, Electrical, Reverse Bayonet, General Specification For |
| SAE AS95234A | Connectors, Electrical, Reverse Bayonet, General Specification for |
| MS3186 Revision G:2011 | Connector, Mounting to Connectors, Mounting Nuts, Plain Hexagon |
| MIL-DTL-3124 Revision E:2014 | Generator, Alternating Current, 60-Hertz (Naval Shipboard Use) |
| MIL-DTL-917 Revision F:2014 | Electric Power Equipment, Basic Requirements for |
| MIL-DTL-53126 Revision A:2012 | Power Distribution, Illumination Systems, Electrical General Specification for |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| A-A-52421 Revision A:2010 | Accessory Kit; Warning Device, Demountable, for Emergency Vehicles (No S/S Document) |
| MIL-DTL-32572 Base Document:2017 | Anchor Windlass, Electro-Mechanical, Vertical, Two-Speedand Variable-Speed |
| MS3187 Revision F:2007 | Plug, End Seal, for MIL-DTL-26482, SAE-AS50151, SAE-AS81703 and MIL-DTL-83723 Electrical Connectors |
| MIL-DTL-83729 Revision C:2013 | Choppers, Electromechanical General Specification for |
| STANAG 3576 : 2016 | ELECTRICAL CONNECTOR FOR DISPENSERS AND INTERNAL INTERVALOMETER TYPE ROCKET LAUNCHERS FOR AIRCRAFT |
| SAE AIR38B | Guide for the Design of Threaded Screw or Stud Type Electrical Equipment Terminations |
| MIL-DTL-3928 Revision H:2016 | Switches, Radio-Frequency Transmission Line, (Coaxial and Microstrip), General Specification for |
| MIL-DTL-7793-15 Revision A:2012 | Meter, Time Totalizing, Miniature, Digital, 115 VAC, 50 to 2400 Hz, Square |
| MIL-DTL-868 Revision A:2014 | Valves, Hydraulic Directional Control, General Specification for |
| MIL-DTL-25038-3 Revision E:2011 | Wire, Electrical, High Temperature, Fire Resistant, Flight Critical, Light Weight, Small Diameter |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| MIL-DTL-83723 Revision H:2016 | Connectors, Electrical, Circular, Environment Resisting and Hermetically Sealed, Receptacles and Plugs, General Specification for |
| MIL-PRF-8805-65 Revision F:2017 | Switches, Sensitive, DPDT, Plunger, 5 Amperes, Resilient Seal |
| MIL-PRF-83323 Revision D:2016 | Tester, Universal Receptacle, Aerial Refueling |
| MS27614 Revision F:2009 | Connectors, Electrical, Receptacle, \"D\" Hole, Jam NutMount, Firewall Series |
| MIL-HDBK-1646 Base Document:2016 | Selectionof Electrical Contacts, Connectors and Associated Servicing Tools |
| MIL-DTL-7793-12 Revision A:2012 | Meter, Reader for Solid State Elapsed Time Indicators Battery Operated, Portable, Hand-Held |
| SAE AIR6151B | Torque, Threaded Application, Electrical Connector, Accessory and Terminal Board Installation |
| MS27615 Revision F:2009 | Connectors, Electrical, Plug, Ratchet Lock Coupling, Firewall Series |
| MIL-DTL-7793-14 Revision B:2017 | Meter, Time Totalizing, Miniature, Digital, 28 VDC or 26 VAC, 50 to 2400 Hz, Square |
| MS27613 Revision G:2015 | Connectors, Electrical, Receptacle, Panel Mount, Firewall Series |
| MIL-DTL-7793-16 Revision A:2012 | Meter, Time Totalizing, Miniature, Digital, 5 VDC, Square |
| AEP-100 : 2016 | ELECTRICAL CONNECTOR FOR DISPENSERS AND INTERNAL INTERVALOMETER TYPE ROCKET LAUNCHERS FOR AIRCRAFT |
| SAE AS34011A | CONNECTORS, RECEPTACLE, ELECTRIC, CABLE CONNECTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE |
| ASTM B 85 : 2003 | Standard Specification for Aluminum-Alloy Die Castings |
| SAE AS35071A | CONNECTOR, PLUG, ELECTRIC, SOLDER CONTACT, QUICK DISCONNECT, UTILITY |
| MIL-I-81969-17 Revision B:1989 | Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C (S/S By SAE-AS81969/17) |
| ASTM B 733 : 2015 : REDLINE | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| SAE AS31071A | Connector Plug, Electric, Quick Disconnect |
| MIL-STD-1651 Revision B:2015 | Insert Arrangements for SAE-AS50151, MIL-DTL-22992 (Classes C, J, and R), MIL-DTL-83723 (Series II), and SAE-AS95234 Circular Electrical Connectors |
| MIL-I-81969-15 Revision A:1979 | Installing and Removal Tools, Connector Electrical Contact Type II, Class 2, Composition A (S/S By SAE-AS81969/15) |
| MIL-PRF-23586 Revision F:1996 | Sealing Compound (With Accelerator), Silicone Rubber, Electrical |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| SAE AIR1351H | Manufacturers\' Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories |
| SAE AS31551A | Connector, Electric, Rear Accessory Design Standard |
| SAE AS34001B | CONNECTORS, RECEPTACLE, ELECTRIC, WALL MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE |
| MS33695 Revision A:2004 | Contacts, Video Coaxial Connector |
| SAE AS34061A | CONNECTORS, PLUG, ELECTRIC, FRONT RELEASE, CRIMP CONTACT, AN TYPE |
| MS3187 Revision F:2007 | Plug, End Seal, for MIL-DTL-26482, SAE-AS50151, SAE-AS81703 and MIL-DTL-83723 Electrical Connectors |
| MIL-DTL-81381 Revision C:2005 | Wire, Electric, Polyimide-Insulated, Copper or Copper Alloy |
| MIL-I-81969-14 Revision C:1987 | Installing and Removal Tools, Connector Electrical Contact, Type III, Class 2, Composition B (S/S By SAE-AS81969/14) |
| MS33678 Revision A:2004 | Connector, Receptacle, Electric, Integral Mounting |
| SAE AS31031A | CONNECTOR, RECEPTACLE, ELECTRIC, POTTING SEAL, SOLDER CONTACT, AN TYPE |
| MIL-DTL-83488 Revision D:1999 | Coating, Aluminum, High Purity |
| SAE AS31061B | CONNECTOR, PLUG, ELECTRIC, STRAIGHT, SOLDER CONTACTS, AN TYPE |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| SAE AS25042C | COVER, ELECTRICAL AS50151 CONNECTOR, PLUG, AN TYPE |
| SAE AS39029/30B | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS50151 AS345XX SERIES AND MIL-DTL-83723 SERIES II CONNECTORS) |
| SAE AS85049/11C | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| SAE AS25043C | COVER, ELECTRICAL AS50151 CONNECTOR, RECEPTACLE, AN TYPE |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| MIL-DTL-25038 Revision J:2012 | Wire, Electrical, High Temperature, Fire Resistant, and Flight Critical |
| MIL-DTL-16878 Revision H:2012 | Wire, Electrical, Insulated, General Specification for |
| MIL-DTL-22520 Revision G:1997 | Crimping Tools, Wire Termination, General Specification for (S/S by SAE-AS22520) |
| SAE AS39029/45C | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 AND AS95234 CONNECTORS) |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| SAE AS31081A | CONNECTORS, PLUG, ELECTRIC, SOLDER CONTACT, 90 DEGREE, AN TYPE |
| MIL-DTL-915 Revision G:2002 | Cable, Electrical, for Shipboard Use, General Specification for |
| L-P-410 Revision A:1966 | Plastic, Polymide (Nylon), Rigid: Rods, Tubes, Flats, Molded and Cast Parts |
| MIL-PRF-8516 Revision G:1997 | Sealing Compound, Synthetic Rubber, Electric Connectors and Electric Systems, Chemically Cured |
| SAE AS34591A | CONNECTOR, PLUG, ELECTRICAL, SELF-LOCKING, COUPLING NUT, REAR RELEASE, CRIMP CONTACT, AN TYPE |
| SAE AS39029D | Contacts, Electrical Connector, General Specification For |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| SAE AS31421 | CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, SOLDER CONTACT, HERMETIC, AN TYPE |
| MS28900 Revision A:1986 | Packing, Preformed, O-Ring, for Electrical Use |
| MIL-I-81969-19 Revision B:1991 | Installing and Removal Tools, Connector Electrical Contact Type II, Class 1, Composition C (S/S By SAE-AS81969/19) |
| SAE AS39029/44C | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 AND AS95234 CONNECTORS) |
| MIL-STD-167-1 Revision A:2005 | Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited) |
| SAE AS31091B | Boots, Heat-Shrinkable, Strain-Relief, Straight |
| MS27488 Revision N:2008 | Plug, End Seal, Electrical Connector |
| MIL-S-7742 Revision D:1991 | Screw Threads, Standard, Optimum Selected Series: General Specification for |
| SAE AS34501B | CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.