SAE J2600_201510
Current
The latest, up-to-date edition.
Compressed Hydrogen Surface Vehicle Fueling Connection Devices
Hardcopy , PDF
English
21-10-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. REQUIREMENTS
5. TYPE (DESIGN VERIFICATION) TESTS
6. PRODUCTION TESTS
7. MARKING
8. DOCUMENTATION
9. NOTES
APPENDIX A (INFORMATIVE ONLY)
SAE J2600 applies to the design and testing of Compressed Hydrogen Surface Vehicle (CHSV) fueling connectors, nozzles, and receptacles.
| DocumentType |
Standard
|
| Pages |
39
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
SAE J2600 applies to the design and testing of Compressed Hydrogen Surface Vehicle (CHSV) fueling connectors, nozzles, and receptacles. Connectors, nozzles, and receptacles must meet all SAE J2600 requirements and pass all SAE J2600 testing to be considered as SAE J2600 compliant.This document applies to devices which have Pressure Classes of H11, H25, H35, H50 or H70.
| ASTM D 7650 : 2013 : REDLINE | Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter |
| SAE J2799_201404 | Hydrogen Surface Vehicle to Station Communications Hardware and Software |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
| CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
| SAE J2601/3_201306 | Fueling Protocol for Gaseous Hydrogen Powered Industrial Trucks |
| NFPA 2:2023 | Hydrogen Technologies Code |
| SAE J2579_202301 | Standard for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles |
| CSA HGV 4.9 : 2016 | HYDROGEN FUELING STATIONS |
| BS ISO 16380 : 2014 | ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| ASTM D 7606 : 2017 : REDLINE | Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
| ASTM D 7651 : 2017 : REDLINE | Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| 13/30236754 DC : 0 | BS ISO 16380 - ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| SAE J2579_201303 | Standard for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| SAE J2601_201612 | Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles |
| CSA HGV 4.7:2013:(R2018) | AUTOMATIC VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
| SAE J2601/2_201409 | Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles |
| ISO 16380:2014 | Road vehicles — Blended fuels refuelling connector |
| CSA HGV 4.1 : 2013 | STANDARD FOR HYDROGEN DISPENSING SYSTEMS |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| SAE J2601/2_202307 | Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles |
| ISO 15501-1:2016 | Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements |
| ISA 75.02.01 : 2008 | CONTROL VALVE CAPACITY TEST PROCEDURES |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| SAE J2601_201612 | Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles |
| SAE J2578_201408 | Recommended Practice for General Fuel Cell Vehicle Safety |
| SAE J2579_201303 | Standard for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles |
| SAE J2799_201404 | Hydrogen Surface Vehicle to Station Communications Hardware and Software |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| SAE J2601/2_201409 | Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles |
| SAE J2574_201109 | Fuel Cell Vehicle Terminology |
| SAE J2601/3_201306 | Fueling Protocol for Gaseous Hydrogen Powered Industrial Trucks |
| SAE J2719_201511 | Hydrogen Fuel Quality for Fuel Cell Vehicles |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO 15501-2:2016 | Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.