SAE MS1000_201302
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Lubricants, Industrial Oils, and Related Products - Classification
Available format(s)
Hardcopy , PDF
Superseded date
03-09-2018
Superseded by
Language(s)
English
Published date
11-02-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. REFERENCES
3. PROPERTIES AND TESTS
4. NOTES
Gives a overview of lubricants and symbols for the purpose of assisting the user in the identification of the appropriate product and relevant SAE specification.
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This index provides an overview of lubricants and symbols for the purpose of assisting the user in the identification of the appropriate product and relevant SAE specification. The aim is to better determine the best lubricant to be used for a particular application.If containers used for shipping lubricants are also to be marked, the same identification and symbols should be used.See also ISO 5169 Machine tools - Presentation of lubrication instructions.
| SAE MS1010_201212 | Lubricants, Industrial Oils, and Related Products Type T Turbine Oils - Specification |
| SAE MS1007_201204 | Lubricants, Industrial Oils, and Related Products Type G Slideway Lubricants - Specification |
| SAE MS1001_201708 | Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems - Specification |
| SAE MS1005_201708 | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids—Specification |
| SAE MS1003_201803 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification |
| SAE MS1003/2_200401 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils – Specification - Addendum |
| SAE MS1006_201803 | Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches - Specification |
| SAE MS1002_201710 | Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification |
| SAE MS1009_201207 | Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils - Specification |
| SAE MS1011_201808 | Lubricants, Industrial Oils, and Related Products - Type X (Greases) - Specification |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 3685:1993 | Tool-life testing with single-point turning tools |
| SAE MS1003_201202 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification |
| SAE MS1008_200701 | Lubricants, Industrial Oils and Related Products Type M (Metal Removal Fluids)—Specification |
| DIN 51794:2003-05 | TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF IGNITION TEMPERATURE |
| DIN 51811:2013-11 (Draft) | TESTING OF LUBRICANTS - TESTING OF CORROSIVENESS TO COPPER OF GREASES - COPPER STRIP TARNISH TEST |
| IP 294 : 2015 | DETERMINATION OF SHEAR STABILITY OF POLYMER-CONTAINING OILS - DIESEL INJECTOR RIG METHOD |
| ISO 2977:1997 | Petroleum products and hydrocarbon solvents Determination of aniline point and mixed aniline point |
| VDMA 24314 : 1981 | HYDRAULICS IN FLUID TECHNOLOGY; CONVERSION OF GASES; GUIDELINES |
| DIN 51808:2015-11 (Draft) | TESTING OF LUBRICANTS - DETERMINATION OF OXIDATION STABILITY OF GREASES - OXYGEN METHOD |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| DIN 38405-5:1985-01 | German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5) |
| DIN 51369:2013-05 | TESTING OF COOLING LUBRICANTS - DETERMINATION OF THE PH VALUE OF WATER-MIXED COOLING LUBRICANTS |
| IP 134 : 83(R1992) | DETERMINATION OF FOREIGN PARTICULATE MATTER IN LUBRICATING GREASE - MICROSCOPIC COUNTING METHOD |
| SAE MS1010_201212 | Lubricants, Industrial Oils, and Related Products Type T Turbine Oils - Specification |
| SAE MS1002_201012 | Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification |
| BS 4385:1980 | Method for determination of water in petroleum products and bituminous materials (distillation method) |
| DIN 51566:1983-12 (Draft) | TESTING OF LUBRICANTS; DETERMINATION OF FOAMING CHARACTERISTICS |
| DIN 38406-3:2002-03 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - CATIONS (GROUP E) - PART 3: DETERMINATION OF CALCIUM AND MAGNESIUM, COMPLEXOMETRIC METHOD (E 3) |
| ISO 5169:1977 | Machine tools — Presentation of lubrication instructions |
| ASTM D 4951 : 2014 : REDLINE | Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 8681:1986 | Petroleum products and lubricants Method of classification Definition of classes |
| ASTM D 2070 : 2017-02 | TEST METHOD FOR THERMAL STABILITY OF HYDRAULIC OILS |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
| ISO 4263:1986 | Petroleum products Inhibited mineral oils Determination of oxidation characteristics |
| DIN 38405-9:2011-09 | German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 9: Spectrometric determination of nitrate (D 9) |
| ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| ASTM D 2877 : 1970 | Methods of Test for Measuring Frictional Properties of Slideway Lubricants (Withdrawn 1974) |
| DIN 51569:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: -55 TO APPROXIMATELY + 10-DEG C |
| ASTM D 2882 : 2000 | Standard Test Method for Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in Constant Volume Vane Pump (Withdrawn 2003) |
| ASTM D 566 : 2017 : REDLINE | Standard Test Method for Dropping Point of Lubricating Grease |
| ISO/TR 3498:1986 | Lubricants, industrial oils and related products (class L) — Recommendations for the choice of lubricants for machine tools |
| ASTM D 808 : 2016 : REDLINE | Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) |
| DIN 51807-2:1990-03 | TESTING OF LUBRICANTS; TEST ON THE BEHAVIOUR OF GREASES IN THE PRESENCE OF WATER; DYNAMIC TESTS |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
| ASTM D 129 : 2013-08 | TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS (GENERAL HIGH PRESSURE DECOMPOSITION DEVICE METHOD) |
| IP 334 : 2015 | DETERMINATION OF LOAD CARRYING CAPACITY OF LUBRICANTS - FZG GEAR MACHINE METHOD |
| DIN 53538-2:1981-09 | STANDARD REFERENCE ELASTOMERS; ACRYLONITRILE BUTADIENE RUBBER (NBR) WITH LOW ACRYLONITRILE CONTENT FOR CHARACTERIZING TEST LIQUIDS AND GREASES BASES ON MINERAL OIL |
| IP 132 : 96(R2004) | PETROLEUM PRODUCTS - LUBRICATING GREASE - DETERMINATION OF DROPPING POINT |
| IP 281 : 80(R1988) | DETERMINATION OF ANTI WEAR PROPERTIES OF HYDRAULIC FLUIDS - VANE PUMP METHOD |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| DIN 51817:2014-08 | Testing of lubricants - Determination of oil separation from greases under static conditions |
| ASTM D 4290 : 2015 : REDLINE | Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions |
| ASTM D 942 : 2015 : REDLINE | Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method |
| ISO 2137:2007 | Petroleum products and lubricants Determination of cone penetration of lubricating greases and petrolatum |
| DIN 51802:2013-12 (Draft) | TESTING OF LUBRICANTS - TESTING OF THE RUST-PREVENTION PROPERTIES OF GREASES - SKF-EMCOR-METHOD |
| IP 166 : 77(R1992) | DETERMINATION OF LOAD-CARRYING CAPACITY OF LUBRICANTS - IAE GEAR MACHINE METHOD |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| SAE MS1011_201808 | Lubricants, Industrial Oils, and Related Products - Type X (Greases) - Specification |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| SAE MS1001_201006 | Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems - Specification |
| ISO 3771:2011 | Petroleum products — Determination of base number — Perchloric acid potentiometric titration method |
| SAE MS1005_201006 | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids—Specification |
| BS 2000-226(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - CALCULATION OF VISCOSITY INDEX FROM KINEMATIC VISCOSITY |
| ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| ASTM D 2896 : 2015 : REDLINE | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| DIN 51575:2016-06 | TESTING OF MINERAL OILS - DETERMINATION OF SULFATED ASH |
| DIN 51389-2:1982-04 | DETERMINATION OF LUBRICANTS; MECHANICAL TESTING OF HYDRAULIC FLUIDS IN THE VANE-CELL-PUMP; METHOD A FOR ANHYDROUS HYDRAULIC FLUIDS |
| ISO 5388:1981 | Stationary air compressors Safety rules and code of practice |
| DIN 51813:2016-03 | Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 ?m |
| SAE MS1004_201010 | Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids) - Specification |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| DIN 51805:1974-08 | TESTING OF LUBRICANTS; DETERMINATION OF FLOW PRESSURE OF LUBRICATING GREASES, KESTERNICH METHOD |
| DIN 51787:1978-07 | TESTING OF MINERAL OIL HYDROCARBONS; DETERMINATION OF ANILINE POINT AND MIXED ANILINE POINT OF DARK MINERAL OIL HYDROCARBONS |
| IP 263 : 1970 | DETERMINATION OF STABILITY OF WATER MIX METAL WORKING FLUIDS |
| DIN 51561:1978-12 | TESTING OF MINERAL OILS, LIQUID FUELS AND RELATED LIQUIDS; MEASUREMENT OF VISCOSITY USING THE VOGEL-OSSAG VISCOMETER; TEMPERATURE RANGE: APPROXIMATELY 10 TO 150-DEG C |
| ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
| ISO 4404:1998 | Petroleum and related products Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| DIN 38404-5:2009-07 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - PHYSICAL AND PHYSICO-CHEMICAL CHARACTERISTICS (GROUP C) - PART 5: DETERMINATION OF PH VALUE (C 5) |
| ASTM D 5182 : 1997 : EDT 1 | Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method) |
| ASTM D 217 : 2017 : REDLINE | TEST METHODS FOR CONE PENETRATION OF LUBRICATING GREASE |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| DIN 51759-1:1988-01 | TESTING OF LIQUID MINERAL OIL PRODUCTS; METHOD OF TEST FOR COPPER CORROSION; COPPER STRIP TEST |
| ASTM D 4048 : 2017-01 | TEST METHOD FOR DETECTION OF COPPER CORROSION FROM LUBRICATING GREASE |
| ASTM D 91 : 2002 : R2007 | Standard Test Method for Precipitation Number of Lubricating Oils |
| IP 278 : 1972(R1988) | DETERMINATION OF SEAL COMPATIBILITY INDEX OF PETROLEUM OILS |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| AGMA 9005 : E | INDUSTRIAL GEAR LUBRICATION |
| ISO 6293-2:1998 | Petroleum products Determination of saponification number Part 2: Potentiometric titration method |
| ASTM D 2068 : 2017 : REDLINE | Standard Test Method for Determining Filter Blocking Tendency |
| DIN 51381:1988-12 | TESTING OF LUBRICATING OILS, GOVERNOR OILS & HYDRAULIC FLUIDS; DETERMINATION OF AIR RELEASE PROPERTIES |
| BS 4450:1976 | Determination of ash from petroleum products |
| DIN 51354-2:1990-04 | TESTING OF LUBRICANTS; FZG GEAR TEST RIG; METHOD A/8.3/90 FOR LUBRICATING OILS |
| DIN 51350-5:2015-03 | TESTING OF LUBRICANTS - TESTING IN THE FOUR-BALL TESTER - PART 5: DETERMINATION OF WEARING CHARACTERISTICS FOR CONSISTENT LUBRICANTS |
| ASTM D 2595 : 2017 | Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range |
| DIN 53505:2000-08 | TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST |
| NFT 60 187 : 1991 | AQUEOUS MACHINING FLUIDS - EMULSIFYING AND SOLUBILIZING SUITABILITY AND STABILITY AT REST |
| ASTM D 3705 : 2014 : REDLINE | Standard Test Method for Misting Properties of Lubricating Fluids |
| DIN 51348:1990-12 | TESTING OF FIRE RESISTANT GOVERNOR FLUIDS; DETERMINATION OF HYDROLYTIC STABILITY |
| IP 136 SECTION 1 : 1998 | PETROLEUM PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - PART 1: COLOUR-INDICATOR TITRATION METHOD |
| IP 284 : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 284: DETERMINATION OF UNSAPONIFIABLE AND SAPONIFIABLE MATTER IN OILS FATS AND WAXES |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| DIN 51775:1978-07 | TESTING OF MINERAL OIL HYDROCARBONS; DETERMINATION OF ANILINE POINT & MIXED ANILINE POINT OF BRIGHT MINERAL OIL HYDROCARBONS |
| IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
| SAE MS1007_200105 | Lubricants, Industrial Oils, and Related Products Type G Slideway Lubricants --- Specification |
| EN 7 : 1974 | DETERMINATION OF ASH FROM PETROLEUM PRODUCTS |
| ASTM D 2711 : 2017 : REDLINE | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| ISO 471:1995 | Rubber Temperatures, humidities and times for conditioning and testing |
| ISO 11158:2009 | Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG |
| IP 157 : 2015 | DETERMINATION OF THE OXIDATION STABILITY OF INHIBITED MINERAL OILS (THE TOST TEST) |
| ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
| BS 4056(1966) : LATEST | METHOD OF TEST FOR IGNITION TEMPERATURE OF GASES AND VAPOURS |
| ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
| IP 326 : 2015 | DETERMINATION OF EXTREME PRESSURE PROPERTIES OF GREASE - TIMKEN METHOD |
| ASTM D 3427 : 2015 : REDLINE | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| BS 4459:1978 | Method for calculating viscosity index of petroleum products and lubricants from kinematic viscosity |
| DIN 51350-4:2015-03 | TESTING OF LUBRICANTS - TESTING IN THE FOUR-BALL TESTER - PART 4: DETERMINATION OF WELDING LOAD OF CONSISTENT LUBRICANTS |
| ASTM E 659 : 2015 : REDLINE | Standard Test Method for Autoignition Temperature of Chemicals |
| ASTM D 128 : 1998 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ISO 6743-0:1981 | Lubricants, industrial oils and related products (class L) — Classification — Part 0: General |
| VDMA 24317 : 2005 | Fluid technology - Flame-retardant hydraulic fluids - Minimum technical requirements |
| IP 71 SECTION 1 : 1997 | PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY |
| SAE MS1009_201207 | Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils - Specification |
| ISO 2176:1995 | Petroleum products — Lubricating grease — Determination of dropping point |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| NFT 60 183 : 1994 XP | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS FOR SLIDEWAYS OF MACHINE-TOOLS - ANTI-STICK SLIP LUBRICATING ABILITY |
| ISO 6293-1:1996 | Petroleum products — Determination of saponification number — Part 1: Colour-indicator titration method |
| ASTM D 1479 : 1964 : R1978 | Method of Test for Emulsion Stability of Soluble Cutting Oils (Withdrawn 1987) |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| DIN 38405-1:1985-12 | German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1) |
| SAE MS1006_201112 | Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches - Specification |
| IP 135 : 2015 | DETERMINATION OF RUST-PREVENTING CHARACTERISTICS OF STEAM-TURBINE OIL IN THE PRESENCE OF WATER |
| ASTM D 943 : 2017-08 | TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS |
| ASTM D 1744 : 2013 | Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) |
| ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| DIN 38406-1:1983-05 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; CATIONS (GROUP E); DETERMINATION OF IRON (E 1) |
| ASTM D 2265 : 2015-05 | TEST METHOD FOR DROPPING POINT OF LUBRICATING GREASE OVER WIDE TEMPERATURE RANGE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.