TS 102 123 : 1.2.1
Current
The latest, up-to-date edition.
BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; RADIO CONFORMANCE TEST SPECIFICATION
Hardcopy , PDF
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Intellectual Property Rights
Foreword
1 Scope
2 References
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols
3.3 Abbreviations
4 Overview
4.1 General requirements
4.2 Required tests
4.3 General test platform
5 Environmental profile
5.1 Equipment within weather protected locations (indoor
locations)
5.2 Equipment for non-weather protected locations (outdoor
locations)
6 Technical requirements specification
6.1 Requirements for radio parameters
6.2 Requirements for base band parameters
7 Test procedures
7.1 Tests for radio parameters
7.2 Tests for baseband parameters
8 Interpretation of the measurement results
Annex A (normative): Supplier's Declaration
A.1 Supplier declaration of conformity
Annex B (normative): Test report
Annex C (informative): Bibliography
History
Pertains to the HIPERACCESS air interface with the specifications of radio conformance test of layer 1 (Radio conformance tests). HIPERACCESS is confined to only the radio subsystem consisting of the physical (PHY) layer and the DLC layer - which are both core network independent - and the core network specific convergence sub-layer.
| Committee |
BRAN
|
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
European Telecommunications Standards Institute
|
| Status |
Current
|
| TR 102 271 : 1.1.1 | BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; RECOMMENDATIONS ON ESSENTIAL RADIO PARAMETERS TO BE INCLUDED IN EN 302 326 |
| EN 301 126-3-2 : 1.2.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING; PART 3-2: POINT-TO-MULTIPOINT ANTENNAS - DEFINITIONS, GENERAL REQUIREMENTS AND TEST PROCEDURES |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 301 126-2-3 : 1.2.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING; PART 2-3: POINT-TO-MULTIPOINT EQUIPMENT; TEST PROCEDURES FOR TDMA SYSTEMS |
| EN 300 385 : 1.2.1 | |
| EN 301 215-4 : 1.1.1 | FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT ANTENNAS; ANTENNAS FOR MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND; PART 4: 30 GHZ TO 40,5 GHZ |
| TS 101 999 : 1.1.1 | BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; PHY PROTOCOL SPECIFICATION |
| ETS 300 132-2 : 20001 | EQUIPMENT ENGINEERING (EE) - POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS EQUIPMENT |
| EN 60950:2000/corrigendum:2002 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| EN 301 213-2 : 1.3.1 | FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT EQUIPMENT; POINT-TO-MULTIPOINT DIGITAL RADIO SYSTEMS IN FREQUENCY BANDS IN THE RANGE 24,25 GHZ TO 29,5 GHZ USING DIFFERENT ACCESS METHODS; PART 2: FREQUENCY DIVISION MULTIPLE ACCESS (FDMA) METHODS |
| TR 100 028-1 : 1.4.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); UNCERTAINTIES IN THE MEASUREMENT OF MOBILE RADIO EQUIPMENT CHARACTERISTICS PART 1 |
| EN 301 213-1 : 1.1.2 | FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT EQUIPMENT; POINT-TO-MULTIPOINT DIGITAL RADIO SYSTEMS IN FREQUENCY BANDS IN THE RANGE 24,25 GHZ TO 29,5 GHZ USING DIFFERENT ACCESS METHODS; PART 1: BASIC PARAMETERS |
| EN 301 215-1 : 1.2.1 | FIXED RADIO SYSTEMS; POINT TO MULTIPOINT ANTENNAS; ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND; PART 1: GENERAL ASPECTS |
| EN 301 390 : 1.3.1 | FIXED RADIO SYSTEMS; POINT-TO-POINT AND MULTIPOINT SYSTEMS; UNWANTED EMISSIONS IN THE SPURIOUS DOMAIN AND RECEIVER IMMUNITY LIMITS AT EQUIPMENT/ANTENNA PORT OF DIGITAL FIXED RADIO SYSTEMS |
| EN 301 997-1 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM); MULTIPOINT EQUIPMENT; RADIO EQUIPMENT FOR USE IN MULTIMEDIA WIRELESS SYSTEMS (MWS) IN THE FREQUENCY BAND 40,5 GHZ TO 43,5 GHZ; PART 1: GENERAL REQUIREMENTS |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| ETS 300 132-1 : 20001 | EQUIPMENT ENGINEERING (EE) - POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS EQUIPMENT - OPERATED BY ALTERNATING CURRENT (AC) DERIVED FROM DIRECT CURRENT (DC) SOURCES |
| EN 301 215-3 : 1.1.1 | FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT ANTENNAS; ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND; PART 3: MULTIPOINT MULTIMEDIA WIRELESS SYSTEM IN 40,5 GHZ TO 43,5 GHZ |
| EN 300 019-1-4 : 2.2.1 | ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-4: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS |
| EN 301 213-3 : 1.4.1 | FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT EQUIPMENT; POINT-TO-MULTIPOINT DIGITAL RADIO SYSTEMS IN FREQUENCY BANDS IN THE RANGE 24,25 GHZ TO 29,5 GHZ USING DIFFERENT ACCESS METHODS; PART 3: TIME DIVISION MULTIPLE ACCESS (TDMA) METHODS |
| TS 102 000 : 1.4.1 | BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; DLC PROTOCOL SPECIFICATION |
| EN 301 215-2 : 1.3.1 | FIXED RADIO SYSTEMS; POINT TO MULTIPOINT ANTENNAS; ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND; PART 2: 24 GHZ TO 30 GHZ |
| TR 100 028-2 : 1.4.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); UNCERTAINTIES IN THE MEASUREMENT OF MOBILE RADIO EQUIPMENT CHARACTERISTICS PART 2 |
| EN 301 489-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU AND THE ESSENTIAL REQUIREMENTS OF ARTICLE 6 OF DIRECTIVE 2014/30/EU |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.