UL 1439:5ED 2015-04-21
Current
Current
The latest, up-to-date edition.
Tests for Sharpness of Edges on Equipment
Available format(s)
Hardcopy
Published date
21-04-2015
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Units of measurement
3 References
4 General
Tests
5 Apparatus
6 Calibration of tester
7 Test procedure
8 Criteria
9 Report
This revision of ANSI/UL 1439 dated May 4, 2021 includes the following changes in requirements: • Removed reference to 3M Company Type 4432 tape; Table 5.1 • Revised test procedure in 7.2
| DevelopmentNote |
NEW CHILD REV 2 2021 IS NOW ADDED.
|
| DocumentType |
Standard
|
| Pages |
0
|
| ProductNote |
NEW CHILD REV 2 2021 IS NOW ADDED.
|
| PublisherName |
Underwriters Laboratories
|
| Status |
Current
|
These requirements cover a test procedure to be used to determine the potential personal injury related to the sharpness of edges that are part of or associated with appliances and equipment.
| CSA C22.2 No. 1335.1 : 1993 : R2004 | PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
| CSA C22.2 No. 107.3 : 2014 | UNINTERRUPTIBLE POWER SYSTEMS |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| ISO 11601:2017 | Fire fighting — Wheeled fire extinguishers — Performance and construction |
| BS EN 61730-1 : 2007 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| SAE ARP5526D | Aircraft Seat Design Guidance and Clarifications |
| CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| UL 1647:6ED 2015-08-03 | Motor-Operated Massage and Exercise Machines |
| AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| 15/30322606 DC : 0 | BS ISO 22702 - UTILITY LIGHTERS - SAFETY SPECIFICATIONS |
| 13/30238229 DC : 0 | BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS |
| EN 62052-31:2016 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
| I.S. EN 61730-1:2007 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 1335.1 : 1993(R2008) | PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
| CSA C22.2 No. 61010.1 : 2012 : FR | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| C22.2 NO. 280-16 | Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016) |
| SAE J1772_201710 | SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| UL 1431:3ED 2011-03-23 | Personal Hygiene and Health Care Appliances |
| UL 1727:5ED 2012-05-21 | Commercial Electric Personal Grooming Appliances |
| UL 943B:3ED 2017-12-04 | Appliance Leakage-Current Interrupters |
| UL 697:7ED 2011-03-03 | Toy Transformers |
| UL 1618:2ED 2015-10-23 | Wall Protectors, Floor Protectors, and Hearth Extensions |
| UL 1602:4ED 2009-01-28 | Gasoline-Engine-Powered, Rigid-Cutting-Member Edgers and Edger-Trimmers |
| NEMA LSD 45:2009 | RECOMMENDATIONS FOR SOLID STATE LIGHTING SUB-ASSEMBLY INTERFACES FOR LUMINAIRES |
| CSA C22.2 No. 61010.1 :2012 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 309 : 2016 | INDUSTRIAL CLOTHES DRYERS |
| CAN/CSA-C22.2 NO. 61010-1-12 (R2017) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
| I.S. EN 61010-1:2010/A1:2019 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| IEEE 2030.1.1-2015 | IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles |
| 00/243909 DC : DRAFT AUG 2000 | IEC 61730-1 - PHOTOVOLTAIC MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| UNE-EN 61010-1:2011 | Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements |
| UL 863:8ED 2007-11-16 | Standard for Time-Indicating and -Recording Appliances |
| UL 1517:3ED 2007-04-20 | Hybrid Personal Flotation Devices |
| UL 756:8ED 2016-08-25 | Standard for Coin and Currency Changers and Actuators |
| UL 1559:5ED 2011-03-21 | Insect-Control Equipment - Electrocution Type |
| UL 1083:6ED 2009-01-09 | Household Electric Skillets and Frying-Type Appliances |
| UL 1863:4ED 2004-05-14 | Standard for Communications-Circuit Accessories |
| CSA C22.2 No. 94.1 : 2015 | ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS |
| UL 626:8ED 2005-02-28 | Water Fire Extinguishers |
| UL 1086:6ED 2016-08-15 | Household Trash Compactors |
| UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
| UL 8:7ED 2016-11-25 | Water Based Agent Fire Extinguishers |
| ISA 61010-1 : 2008 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UL 1082:6ED 2009-03-17 | Household Electric Coffee Makers and Brewing-Type Appliances |
| UL 763:5ED 2018-02-28 | Motor-Operated Commercial Food Preparing Machines |
| UL 181B:3ED 2013-01-08 | Closure Systems for Use With Flexible Air Ducts and Air Connectors |
| UL 499:14ED 2014-11-07 | Electric Heating Appliances |
| UL 283:3ED 2015-06-16 | Air Fresheners and Deodorizers |
| UL 1778:5ED 2014-06-13 | Uninterruptible Power Systems |
| UL 2251:4ED 2017-11-20 | Plugs, Receptacles, and Couplers for Electric Vehicles |
| UL 268A:4ED 2008-12-11 | Smoke Detectors for Duct Application |
| UL 50:13ED 2015-10-16 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
| UL 2572:2ED 2016-03-28 | Mass Notification Systems |
| UL 775:3ED 1998-02-27 | Standard for Graphic Arts Equipment |
| UL 1795:5ED 2016-09-02 | Standard for Hydromassage Bathtubs |
| UL 864:10ED 2014-12-01 | Standard for Control Units and Accessories for Fire Alarm Systems |
| UL 1484:5ED 2016-04-20 | Residential Gas Detectors |
| UL 2129:3ED 2017-01-05 | Halocarbon Clean Agent Fire Extinguishers |
| ASTM F 2571 : 2015 : REDLINE | Standard Test Methods for Evaluating Design and Performance Characteristics of Fitness Equipment |
| CSA C22.2 No. 1335.1 : 1993(R2013) | PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
| CSA C22.2 No. 167 : 2017 | HOUSEHOLD DISHWASHERS |
| CSA C22.2 No. 61730-1 : 2011 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| SAE J3068_201804 | Electric Vehicle Power Transfer System Using a Three-Phase Capable Coupler |
| UL 959:9ED 2010-12-17 | Medium Heat Appliance Factory-Built Chimneys |
| ISO 7165:2017 | Fire fighting — Portable fire extinguishers — Performance and construction |
| IEC 62052-31:2015 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| BS ISO 11601:2017 | Fire fighting. Wheeled fire extinguishers. Performance and construction |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| IEC TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children |
| UL 1563:6ED 2009-07-16 | Electric Spas, Equipment Assemblies, and Associated Equipment |
| UL 82:9ED 2017-08-31 | Electric Gardening Appliances |
| UL 1971:3ED 2002-11-29 | Signaling Devices for the Deaf and Hard of Hearing |
| UL 961:5ED 2014-12-05 | Standard for Electric Hobby and Sports Equipment |
| UL 73:10ED 2011-03-02 | Standard for Motor-Operated Appliances |
| 04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| C22.2 NO. 243-17 | Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) |
| I.S. EN 62052-31:2016 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS |
| ASTM F 2988 : 2012 | Standard Specification for Commercial Coffee Brewers |
| CSA C22.2 No. 61 : 2016 | HOUSEHOLD COOKING RANGES |
| UL 1659:3ED 2005-04-13 | Attachment Plug Blades for Use in Cord Sets and Power-Supply Cords |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61010-1:2010 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| 14/30299887 DC : 0 | BS ISO 11601 - FIRE FIGHTING - WHEELED FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION |
| PD IEC/TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 61730-1:2007/A11:2014 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED) |
| CSA C22.2 No. 282 : 2013 | PLUGS, RECEPTACLES, AND COUPLERS FOR ELECTRIC VEHICLES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.