IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
EN 60216-1:2013
|
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
ANSI Z97.1 : 2015
|
SAFETY GLAZING MATERIALS USED IN BUILDINGS - SAFETY PERFORMANCE SPECIFICATIONS AND METHODS OF TEST |
UL 1439 : 5
|
TESTS FOR SHARPNESS OF EDGES ON EQUIPMENT |
EN 50548 : 2011 AMD 2 2014
|
JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
EN 60065:2014/AC:2017-01
|
AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
IEC 60189-1:2007
|
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
IEC 60695-1-1:1999
|
Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
IEC 61215:2005
|
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
IEC 61730-2:2016
|
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
ISO 9773:1998
|
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
EN 61646:2008
|
THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL |
IEC 60364-5-51:2005
|
Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules |
EN 60512-5-2:2002
|
Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating |
IEC 60512-5-1:2002
|
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise |
UL 746C : 6
|
POLYMERIC MATERIALS - USE IN ELECTRICAL EQUIPMENT EVALUATIONS |
EN 60947-1:2007/A2:2014
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
HD 60364-5-51:2009/A12:2017
|
ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
EN 60512-5-1 : 2002
|
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise |
EN 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
EN 60112 : 2003 AMD 1 2009
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
IEC 61646:2008
|
Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval |
ISO 262:1998
|
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
ASTM D 2303 : 2013
|
Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
EN 61730-2:2007/A1:2012
|
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
ISO 9772:2012
|
Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
EN 60695-2-10:2013
|
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules |
EN 50521:2008/A1:2012
|
CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
EN 60216-5:2008
|
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60512-5-2:2002
|
Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating |
IEC 60189-2:2007
|
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations |
ISO 261:1998
|
ISO general purpose metric screw threads General plan |
EN 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
IEC 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
EN 61984:2009
|
Connectors - Safety requirements and tests |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
IEC 60216-5:2008
|
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
EN 50380:2017
|
Marking and documentation requirements for Photovoltaic Modules |
IEC 60695-2-10:2013
|
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60216-1:2013
|
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
ASTM E 162 : 2016 : REDLINE
|
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
EN 61215:2005
|
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
EN 60695-1-1:2000
|
Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |