UNI EN 13774 : 2013
Current
Current
The latest, up-to-date edition.
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
Published date
14-03-2013
Sorry this product is not available in your region.
PREMESSA
1 SCOPO E CAMPO DI APPLICAZIONE
2 RIFERIMENTI NORMATIVI
3 TERMINI E DEFINIZIONI
4 SIMBOLI E ABBREVIAZIONI
5 REQUISITI, PROVE DI TIPO E PROVE DI PRODUZIONE
6 MARCATURA
APPENDICE A (normativa) - METODI DI PROVA DELLE VALVOLE
APPENDICE B (informativa) - NORME EUROPEE PER LE VALVOLE
APPENDICE C (informativa) - RIEPILOGO DELLE PROVE SUL
PRODOTTO E DELLE PROVE DI TIPO
BIBLIOGRAFIA
Describes metal isolating valves used for gas distribution systems with maximum operating pressure up to 16 bar, and which operate with fuel gases of the first, the second and the third family, in accordance with EN 437.
| DevelopmentNote |
Italian version issued in JUNE 2013. (06/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 13774:2013 | Identical |
| DIN EN 13774:2013-05 | Identical |
| NEN EN 13774 : 2013 | Identical |
| BS EN 13774:2013 | Identical |
| UNE-EN 13774:2013 | Identical |
| NS EN 13774 : 2013 | Identical |
| I.S. EN 13774:2013 | Identical |
| SN EN 13774:2013 | Identical |
| NF EN 13774 : 2013 | Identical |
| NBN EN 13774 : 2013 | Identical |
| UNI 10619-2 : 2014 | GAS PRESSURE CONTROL SYSTEMS AND/OR GAS MEASUREMENT INSTALLATIONS FOR INLET MAX PRESSURE UP TO 12 BAR FOR INDUSTRIAL AND DOMESTIC USE - PART 2: DESIGN, CONSTRUCTION AND TESTING - EQUIPMENT FOR GAS CONTROL |
| UNI 10619-1 : 2014 | GAS PRESSURE CONTROL SYSTEMS AND/OR GAS MEASUREMENT INSTALLATIONS FOR INLET MAX PRESSURE UP TO 12 BAR FOR INDUSTRIAL AND DOMESTIC USE - PART 1: DESIGN, CONSTRUCTION AND TESTING - GENERAL |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| EN 1555-3:2010+A1:2012 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN 12007-1:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
| EN 1983:2013 | Industrial valves - Steel ball valves |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
| EN 1984:2010 | Industrial valves - Steel gate valves |
| EN 1555-2:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| EN 1171:2015 | Industrial valves - Cast iron gate valves |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| EN 12117:1997 | Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.