UNI EN 14800 : 2007
Current
The latest, up-to-date edition.
CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS
18-10-2007
PREMESSA
INTRODUZIONE
1 SCOPO E CAMPO DI APPLICAZIONE
2 RIFERIMENTI NORMATIVI
3 TERMINI E DEFINIZIONI
4 REQUISITI COSTRUTTIVI
5 REQUISITI PRESTAZIONALI E PROVE
6 VALUTAZIONE DI CONFORMITA
APPENDICE A (informativa) - REQUISITI DI PROGETTAZIONE DEI
RACCORDI DEI TUBI PER IL COLLEGAMENTO AL TUBO
DI ALIMENTAZIONE DEL GAS, AL RIDUTTORE DELLA
PRESSIONE DELLE BOMBOLE DI GAS PORTATILI O A
UN APPARECCHIO PER USO DOMESTICO
APPENDICE B (normativa) - ATTACCO TERMICO DIRETTO MEDIANTE
UNA SINGOLA FIAMMA
APPENDICE C (normativa) - PROVA CON L'IMPIEGO DI UNA SINGOLA
FIAMMA
APPENDICE ZA (informativa) - PUNTI DELLA PRESENTE NORMA
EUROPEA RIGUARDANTI LE DISPOSIZIONI DELLA
DIRETTIVA UE RELATIVA AI PRODOTTI DA COSTRUZIONE
BIBLIOGRAFIA
Describes the requirements of performance, the material and the test methods of corrugated safety metal gas hose assemblies for the connection of domestic appliances, in order to achieve save operation.
| Committee |
CT 108
|
| DevelopmentNote |
Supersedes UNI 9891. (10/2007)
|
| DocumentType |
Test Method
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 14800 : 2008 | Identical |
| I.S. EN 14800:2007 | Identical |
| NF EN 14800 : 2007 | Identical |
| BS EN 14800:2007 | Identical |
| EN 14800:2007 | Identical |
| NS EN 14800 : 1ED 2007 | Identical |
| NEN EN 14800 : 2007 | Identical |
| NBN EN 14800 : 2007 | Identical |
| DIN EN 14800:2007-06 | Identical |
| UNI 10738 : 2012 | EXISTING GAS PLANTS FOR DOMESTIC USE - GUIDELINES FOR CHECKING THEIR SUITABILITY TO SAFE OPERATION |
| UNI/TS 11343 : 2009 | GAS PLANTS FOR DOMESTIC USE - GAS PLANTS FOR DOMESTIC USES SUPPLIED BY DISTRIBUTION NETWORKS, BY LPG CYLINDERS AND LPG STORAGE TANKS, PERFORMED WITH MULTILAYER PIPES - DESIGN, INSTALLATION AND MAINTENANCE |
| UNI 11528 : 2014 | GAS PLANTS OVER 35 KW - DESIGN, INSTALLATION AND COMMISSIONING |
| UNI 7131 : 2014 | LPG PLANTS FOR DOMESTIC USE NOT FED BY A DISTRIBUTION NETWORK - DESIGN, INSTALLATION AND COMMISSIONING |
| ISO 691:2005 | Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use |
| DVGW VP 635-1 : 2001 | SAFETY GAS CONNECTION VALVES FOR METALLIC AND/OR NON-METALLIC GAS PIPES FOR THE CONNECTION OF FLEXIBLE METALLIC OR NON-METALLIC HOSE ASSEMBLIES |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| NFD 36 121 : 2009 AMD 1 2011 | HOUSEHOLD ECONOMY - END FITTINGS WITH SEAL GASKET FOR CORRUGATED METALLIC FLEXIBLE PIPING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS DISTRIBUTED BY NETWORKS |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 13133:2000 | Brazing - Brazer approval |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| NBN E 03 101 : 1986 | PIPE THREADS FOR TUBES AND FITTINGS WHERE PRESSURE-TIGHT JOINTS ARE MADE ON THE THREADS |
| DIN 3383-1:2013-08 | CONNECTION OF GAS APPLIANCES - PART 1: GAS CONNECTION VALVES, SAFETY HOSE ASSEMBLIES |
| UNE 60715-1:2013 | Flexible hoses for connection of gas receiving installations to gas-fired appliances. Metal hose assemblies with safety gas connection valves and thread. Part 1: Elastomeric packed metallic stripwound flexible hose assemblies. |
| EN ISO 10380:2012 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
| ISO 10380:2012 | Pipework — Corrugated metal hoses and hose assemblies |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| UNE 60715-2:2013 | Flexible hoses for connection of gas receiving installations to gas-fired appliances. Metal hose assemblies with safety gas connection valves and thread. Part 2: Stainless steel flexible hose assemblies. |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| NFD 36 125 : 2009 AMD 1 2011 | HOUSEHOLD ECONOMY - END FITTINGS WITH SEAL GASKET FOR CORRUGATED METALLIC FLEXIBLE PIPING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING BUTANE AND PROPANE FROM CYLINDERS |
| ISO 9001:2015 | Quality management systems — Requirements |
| DIN 82:1973-01 | KNURLS |
| EN 13134:2000 | Brazing - Procedure approval |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| BS 669-1:1989 | Flexible hoses, end fittings and sockets for gas burning appliances Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases |
| DIN 3383-2:2013-08 | CONNECTION OF GAS APPLIANCES - PART 2: HOSE ASSEMBLIES FOR RIGID CONNECTION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.