UNI EN 1487 : 2014
Current
The latest, up-to-date edition.
BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS
11-09-2014
PREMESSA
INTRODUZIONE
1 SCOPO E CAMPO DI APPLICAZIONE
2 RIFERIMENTI NORMATIVI
3 TERMINI E DEFINIZIONI
4 MATERIALI E FINITURE SUPERFICIALI
5 REQUISITI DI PROGETTAZIONE E DIMENSIONALI
6 APPARECCHIATURA
7 PROVE IDRAULICHE E REQUISITI
8 PROVE MECCANICHE E REQUISITI
9 PROVE E REQUISITI DEI COMPONENTI DEL GRUPPO
DI SICUREZZA IDRAULICA
10 RESISTENZA AGLI SHOCK TERMICI
11 PROVE ACUSTICHE E REQUISITI
12 CLASSIFICAZIONE
13 DESIGNAZIONE
14 MARCATURA
15 DOCUMENTI TECNICI E PRESENTAZIONE ALLA CONSEGNA
APPENDICE A (informativa) - SEQUENZE DI PROVA
Defines dimensions, materials and performance requirements (including methods of test) for hydraulic safety groups, of nominal sizes from DN 15 to DN 25, having working pressures) from 0,1 MPa (1 bar) to 0,7 MPa (7 bar).
| Committee |
CT 33
|
| DevelopmentNote |
Supersedes UNI 9940. (01/2002) Italian version issued in NOVEMBER 2014. (11/2014)
|
| DocumentType |
Test Method
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 1487 : 2014 | Identical |
| EN 1487:2014 | Identical |
| BS EN 1487:2014 | Identical |
| NS EN 1487 : 2014 | Identical |
| UNE-EN 1487:2001 | Identical |
| NF EN 1487 : 2014 | Identical |
| NEN EN 1487 : 2014 | Identical |
| SN EN 1487 : 2014 | Identical |
| I.S. EN 1487:2014 | Identical |
| DIN EN 1487:2014-09 | Identical |
| DIN EN 1487:2000-06 | Identical |
| ISO 3822-1:1999 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement |
| EN 1567:1999 | Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| EN 806-3:2006 | Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method |
| EN 806-5:2012 | Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance |
| EN 1488:2000 | Building valves - Expansion groups - Tests and requirements |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| EN ISO 4628-3:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| EN 13959:2004 | Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
| ISO 3822-3:1997 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| EN 248:2002 | Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.