|
VDI 3883 Blatt 1:2015-09
|
Effects and assessment of odours - Assessment of odour annoyance - Questionnaires |
|
TRGS 557 : 2008
|
|
|
VDI 2102 Blatt 1:2007-04 (Draft)
|
Emission control - Secondary copper smelting and refining plants |
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
|
DIN 1701:1980-05
|
REFINED NICKEL |
|
ISO 23210:2009
|
Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors |
|
VDI 3677 Blatt 3:2012-11
|
Filtering-separators - High-temperature gas filtration |
|
EN 1948-2:2006
|
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs |
|
VDI 3481 Blatt 1:1975-08
|
Gaseous emission measurement; determination of hydrocarbon concentration; flame-ionization-detector (FID) |
|
DIN EN 573-3:2013-12
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
|
DIN EN 14791:2006-04
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
|
CEN/TS 14793:2005
|
Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method |
|
VDI 4085:2017-04
|
Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials |
|
DIN EN 1948-4:2014-03
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS |
|
DIN EN 14790:2006-04
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
|
DIN EN 1911:2010-12
|
Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
|
DIN EN 12659:1999-11
|
LEAD AND LEAD ALLOYS - LEAD |
|
VDI 3882 Blatt 2:1994-09
|
Olfactometry - Determination of hedonic odour tone |
|
DIN EN 1179:2003-09
|
ZINC AND ZINC ALLOYS - PRIMARY ZINC |
|
TRD 604-1 : 2000
|
OPERATION OF STEAM BOILER PLANTS WITH STEAM GENERATORS OF GROUP 4 WITHOUT PERMANENT SUPERVISION |
|
EN 1976:2012
|
Copper and copper alloys - Cast unwrought copper products |
|
EN 13725:2003/AC:2006
|
AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
|
EN 15259:2007
|
Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
|
PREN 14181 : DRAFT 2012
|
STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS |
|
EN 1978:1998
|
Copper and copper alloys - Copper cathodes |
|
TRD 604-2 : 1996
|
OPERATION OF STEAM BOILER PLANTS WITH HOT WATER GENERATORS OF GROUP 4 WITHOUT PERMANENT SUPERVISION |
|
VDI 4220:2011-04
|
Quality assurance - Requirements on bodies for the determination of air pollutants at stationary sources and in ambient air |
|
EN 12659:1999
|
Lead and lead alloys - Lead |
|
VDI 2448 Blatt 2:1997-07
|
Statistical evaluation of random-sample measurements of stationary source emissions: Determination of the upper confidence limit |
|
EN 13284-1:2017
|
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
|
EN 1981:2003
|
Copper and copper alloys - Master alloys |
|
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures |
|
VDI 3677 Blatt 1:2010-11
|
Filtering separators - Surface filters |
|
DIN EN ISO 23210:2009-12
|
Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
|
EN 15058:2017
|
Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry |
|
VDI 4285 Blatt 1:2005-06
|
Determination of diffusive emissions by measurement - Basic concepts |
|
EN 1948-1:2006
|
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs |
|
DIN EN 13284-1:2015-12 (Draft)
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
|
DIN CEN/TS 14793:2005-06
|
STATIONARY SOURCE EMISSION - INTRALABORATORY VALIDATION PROCEDURE FOR AN ALTERNATIVE METHOD COMPARED TO A REFERENCE METHOD |
|
EN 1911:2010
|
Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
|
EN 1179:2003
|
Zinc an zinc alloys - Primary zinc |
|
DIN EN 12619:2013-04
|
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
|
EN 576:2003
|
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
|
VDI 3674:2013-04
|
Waste gas cleaning by adsorption - Process gas and waste gas cleaning |
|
VDI 4285 Blatt 2:2011-03
|
Determination of diffusive emissions by measurements - Industrial halls and livestock farming |
|
VDI 4219:2009-08
|
Determination of the uncertainty of emission measurements by use of discontinuous measurement methods |
|
EN 1977:2013
|
Copper and copper alloys - Copper drawing stock (wire rod) |
|
EN 14790:2017
|
Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
|
VDI 3676:1999-10
|
Inertial Separators |
|
DIN EN 14789:2006-04
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
|
DIN EN 14181:2015-02
|
Stationary source emissions - Quality assurance of automated measuring systems |
|
DIN EN 15058:2006-09
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
|
DIN EN 12861:1999-10
|
COPPER AND COPPER ALLOYS - SCRAP |
|
DIN EN 13725:2003-07
|
Air quality - Determination of odour concentration by dynamic olfactometry |
|
DIN EN 1976:2013-01
|
COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
|
VDI 3882 Blatt 1:1992-10
|
Olfactometry; determination of odour intensity |
|
VDI 2066 Blatt 1:1975-10
|
Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
|
DIN EN 14792:2006-04
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
|
EN 14792:2017
|
Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
|
PREN 1977 : DRAFT 2011
|
COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
|
EN 1948-4:2010+A1:2013
|
STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS |
|
VDI 2450 Blatt 1:1977-09
|
Measurement of air pollutant emission, transmission, and immission; definitions and glossary of terms |
|
EN 573-3:2013
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
|
DIN EN 15259:2008-01
|
Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
|
VDI 3950:2006-12
|
Stationary source emissions - Quality assurance of automated measuring and electronic data evaluation systems |