ISO 13584-1:2001
|
Industrial automation systems and integration — Parts library — Part 1: Overview and fundamental principles |
ISO 10511:2012
|
Prevailing torque type hexagon thin nuts (with non-metallic insert) |
ISO 8839:1986
|
Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals |
ISO 4035:2012
|
Hexagon thin nuts chamfered (style 0) — Product grades A and B |
ISO 8675:2012
|
Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
ISO 8673:2012
|
Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
ISO 13584-24:2003
|
Industrial automation systems and integration — Parts library — Part 24: Logical resource: Logical model of supplier library |
ISO 7046-1:2011
|
Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 1: Steel screws of property class 4.8 |
ISO 16584:2002
|
Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt |
ISO 1051:1999
|
Rivet shank diameters |
ISO 4766:2011
|
Slotted set screws with flat point |
ISO 8744:1997
|
Grooved pins Full-length taper grooved |
ISO 7090:2000
|
Plain washers, chamfered Normal series Product grade A |
ISO 8765:2011
|
Hexagon head bolts with metric fine pitch thread Product grades A and B |
ISO 8741:1997
|
Grooved pins Half-length reverse-taper grooved |
ISO 13918:2008
|
Welding Studs and ceramic ferrules for arc stud welding |
ISO 15974:2000
|
Closed end blind rivets with break pull mandrel and countersunk head AlA/St |
ISO 15480:1999
|
Hexagon washer head drilling screws with tapping screw thread |
ISO 7412:1984
|
Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) Product grade C Property classes 8.8 and 10.9 |
ISO 8678:1988
|
Cup head square neck bolts with small head and short neck Product grade B |
ISO 15980:2002
|
Open end blind rivets with break pull mandrel and countersunk head — St/St |
ISO 10644:2009
|
Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV |
ISO 8749:1986
|
Pins and grooved pins Shear test |
ISO 4759-3:2016
|
Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F |
ISO 21670:2014
|
Fasteners — Hexagon weld nuts with flange |
ISO 7042:2012
|
Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
ISO 21269:2004
|
Hexagon socket head cap screws with metric fine pitch thread |
ISO 6157-3:1988
|
Fasteners Surface discontinuities Part 3: Bolts, screws and studs for special requirements |
ISO 8735:1997
|
Parallel pins with internal thread, of hardened steel and martensitic stainless steel |
ISO 4753:2011
|
Fasteners Ends of parts with external ISO metric thread |
ISO 10642:2004
|
Hexagon socket countersunk head screws |
ISO 15983:2002
|
Open end blind rivets with break pull mandrel and protruding head — A2/A2 |
ISO 14583:2011
|
Hexalobular socket pan head screws |
ISO 7417:1984
|
Hexagon nuts for structural bolting Style 2, hot-dip galvanized (oversize tapped) Product grade A Property class 9 |
ISO 8743:1997
|
Grooved pins Half-length centre grooved |
ISO 2340:1986
|
Clevis pins without head |
ISO 4775:1984
|
Hexagon nuts for high-strength structural bolting with large width across flats Product grade B Property classes 8 and 10 |
ISO 8674:2012
|
Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
ISO 7045:2011
|
Pan head screws with type H or type Z cross recess Product grade A |
ISO 7436:1983
|
Slotted set screws with cup point |
ISO 7720:2012
|
Prevailing torque type all-metal hexagon nuts, style 2 Property class 9 |
ISO 4016:2011
|
Hexagon head bolts Product grade C |
ISO 14588:2000
|
Blind rivets Terminology and definitions |
ISO 4759-1:2000
|
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
ISO 15979:2002
|
Open end blind rivets with break pull mandrel and protruding head — St/St |
ISO 6157-1:1988
|
Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
ISO 4034:2012
|
Hexagon regular nuts (style 1) Product grade C |
ISO 8740:1997
|
Grooved pins Full-length parallel grooved, with chamfer |
ISO 8676:2011
|
Hexagon head screws with metric fine pitch thread Product grades A and B |
IEC 61360-4:2005
|
Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes |
ISO 14589:2000
|
Blind rivets Mechanical testing |
ISO 4161:2012
|
Hexagon nuts with flange, style 2 — Coarse thread |
ISO 7043:2012
|
Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B |
ISO 8733:1997
|
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel |
ISO 4015:1979
|
Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
ISO 7379:1983
|
Hexagon socket head shoulder screws |
ISO 7721:1983
|
Countersunk head screws — Head configuration and gauging |
ISO 7415:1984
|
Plain washers for high-strength structural bolting, hardened and tempered |
ISO 15975:2002
|
Closed end blind rivets with break pull mandrel and protruding head — AI/AIA |
ISO 10484:1997
|
Widening test on nuts |
ISO 15984:2002
|
Open end blind rivets with break pull mandrel and countersunk head — A2/A2 |
ISO 5408:2009
|
Screw threads Vocabulary |
ISO 10509:2012
|
Hexagon flange head tapping screws |
ISO 7085:1999
|
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
ISO 7049:2011
|
Cross-recessed pan head tapping screws |
ISO 10666:1999
|
Drilling screws with tapping screw thread — Mechanical and functional properties |
ISO 8751:2007
|
Spring-type straight pins Coiled, light duty |
ISO 7053:2011
|
Hexagon washer head tapping screws |
ISO 7435:1983
|
Slotted set screws with long dog point |
ISO 1234:1997
|
Split pins |
ISO 8739:1997
|
Grooved pins Full-length parallel grooved, with pilot |
ISO 4017:2014
|
Fasteners Hexagon head screws Product grades A and B |
ISO 2338:1997
|
Parallel pins, of unhardened steel and austenitic stainless steel |
IEC 61360-2:2012
|
Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema |
ISO 225:2010
|
Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
ISO 7048:2011
|
Cross-recessed cheese head screws |
ISO 4032:2012
|
Hexagon regular nuts (style 1) — Product grades A and B |
ISO 15072:2012
|
Hexagon bolts with flange with metric fine pitch thread Small series Product grade A |
ISO 7416:1984
|
Plain washers, chamfered, hardened and tempered for high-strength structural bolting |
ISO 15481:1999
|
Cross recessed pan head drilling screws with tapping screw thread |
ISO 8750:2007
|
Spring-type straight pins Coiled, standard duty |
ISO 10669:1999
|
Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A |
ISO 8752:2009
|
Spring-type straight pins — Slotted, heavy duty |
ISO 10510:2011
|
Tapping screw and washer assemblies with plain washers |
ISO 7414:1984
|
Hexagon nuts for structural bolting with large width across flats, style 1 Product grade B Property class 10 |
ISO 8746:1997
|
Grooved pins with round head |
ISO 7413:1984
|
Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) Product grades A and B Property classes 5, 6 and 8 |
ISO 16585:2002
|
Closed end blind rivets with pull mandrel and protruding head — A2/SSt |
ISO 8736:1986
|
Taper pins with internal thread, unhardened |
ISO 4762:2004
|
Hexagon socket head cap screws |
ISO 10303-11:2004
|
Industrial automation systems and integration Product data representation and exchange Part 11: Description methods: The EXPRESS language reference manual |
ISO 15977:2002
|
Open end blind rivets with break pull mandrel and protruding head — AIA/St |
ISO 4027:2003
|
Hexagon socket set screws with cone point |
ISO 7050:2011
|
Cross-recessed countersunk (flat) head tapping screws |
ISO 10485:1991
|
Cone proof load test on nuts |
ISO 15978:2002
|
Open end blind rivets with break pull mandrel and countersunk head — AIA/St |
ISO 4036:2012
|
Hexagon thin nuts unchamfered (style 0) Product grade B |
ISO 7089:2000
|
Plain washers Normal series Product grade A |
ISO 68-1:1998
|
ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
ISO 8745:1997
|
Grooved pins Half-length taper grooved |
ISO 7719:2012
|
Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
ISO 15973:2000
|
Closed end blind rivets with break pull mandrel and protruding head AlA/St |
ISO 13337:2009
|
Spring-type straight pins — Slotted, light duty |
ISO 7091:2000
|
Plain washers Normal series Product grade C |
ISO 7092:2000
|
Plain washers Small series Product grade A |
ISO 7434:1983
|
Slotted set screws with cone point |
ISO 10513:2012
|
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
ISO 2339:1986
|
Taper pins, unhardened |
ISO 15483:1999
|
Cross recessed raised countersunk head drilling screws with tapping screw thread |
ISO 4029:2003
|
Hexagon socket set screws with cup point |
ISO 15071:2011
|
Hexagon bolts with flange Small series Product grade A |
ISO 10512:2012
|
Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
ISO 7040:2012
|
Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
ISO 8738:1986
|
Plain washers for clevis pins Product grade A |
ISO 12125:2012
|
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B |
ISO 13584-42:2010
|
Industrial automation systems and integration — Parts library — Part 42: Description methodology: Methodology for structuring parts families |
ISO 7051:2011
|
Cross-recessed raised countersunk (oval) head tapping screws |
ISO 7411:1984
|
Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) Product grade C Property classes 8.8 and 10.9 |
ISO 14580:2011
|
Hexalobular socket cheese head screws |
ISO 4026:2003
|
Hexagon socket set screws with flat point |
ISO 16583:2002
|
Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt |
ISO 15482:1999
|
Cross recessed countersunk head drilling screws with tapping screw thread |
ISO 10303-21:2002
|
Industrial automation systems and integration Product data representation and exchange Part 21: Implementation methods: Clear text encoding of the exchange structure |
ISO 8742:1997
|
Grooved pins One-third-length centre grooved |
ISO 2341:1986
|
Clevis pins with head |
ISO 4033:2012
|
Hexagon high nuts (style 2) — Product grades A and B |
ISO 15982:2002
|
Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA |
ISO 6157-2:1995
|
Fasteners Surface discontinuities Part 2: Nuts |
ISO 15976:2002
|
Closed end blind rivets with break pull mandrel and protruding head — St/St |
ISO 7041:2012
|
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 |
ISO 8748:2007
|
Spring-type straight pins Coiled, heavy duty |
ISO 16582:2002
|
Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt |
ISO 8737:1986
|
Taper pins with external thread, unhardened |
ISO 8992:2005
|
Fasteners — General requirements for bolts, screws, studs and nuts |
ISO 14587:2011
|
Hexalobular socket raised countersunk (oval) head tapping screws |
ISO 14585:2011
|
Hexalobular socket pan head tapping screws |
ISO 10673:2009
|
Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A |
ISO 4028:2003
|
Hexagon socket set screws with dog point |
ISO 8747:1997
|
Grooved pins with countersunk head |
ISO 7380:2004
|
Hexagon socket button head screws |
ISO 7093-2:2000
|
Plain washers Large series Part 2: Product grade C |
ISO 10664:2014
|
Hexalobular internal driving feature for bolts and screws |
ISO 7721-2:1990
|
Countersunk flat head screws — Part 2: Penetration depth of cross recesses |
ISO 1478:1999
|
Tapping screws thread |
ISO 8734:1997
|
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) |
ISO 4757:1983
|
Cross recesses for screws |
ISO 14579:2011
|
Hexalobular socket head cap screws |
ISO 15981:2002
|
Open end blind rivets with break pull mandrel and protruding head — AIA/AIA |
ISO 10663:2012
|
Hexagon nuts with flange, style 2 — Fine pitch thread |
ISO 13584-26:2000
|
Industrial automation systems and integration — Parts library — Part 26: Logical resource: Information supplier identification |
ISO 14586:2011
|
Hexalobular socket countersunk head tapping screws |
ISO 3269:2000
|
Fasteners Acceptance inspection |
ISO 7046-2:2011
|
Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
ISO 7047:2011
|
Raised countersunk head screws (common head style) with type H or type Z cross recess Product grade A |
ISO 7378:1983
|
Fasteners — Bolts, screws and studs — Split pin holes and wire holes |
ISO 7044:2012
|
Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
ISO 4014:2011
|
Hexagon head bolts Product grades A and B |
ISO 4018:2011
|
Hexagon head screws Product grade C |
ISO 12126:2012
|
Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B |
ISO 7093-1:2000
|
Plain washers Large series Part 1: Product grade A |
ISO 14584:2011
|
Hexalobular socket raised countersunk head screws |
ISO 4162:2012
|
Hexagon bolts with flange Small series Product grade A with driving feature of product grade B |
ISO 1891:2009
|
Fasteners — Terminology |