EN 10240:1997
|
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
ISO 9223:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
ISO 2063:2005
|
Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
EN ISO 5817:2014
|
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
ISO 8504-1:2000
|
Preparation of steel substrates before application of paints and related products Surface preparation methods Part 1: General principles |
EN 10221:1995
|
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
EN 13523-10:2017
|
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
EN ISO 8289 : 2001
|
VITREOUS AND PORCELAIN ENAMELS - LOW VOLTAGE TEST FOR DETECTING AND LOCATING DEFECTS |
ISO 6270-1:1998
|
Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
ISO 1520:2006
|
Paints and varnishes Cupping test |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
EN ISO 9227:2017
|
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN ISO 8504-2:2001
|
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000) |
EN 13811 : 2003
|
SHERARDIZING - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SPECIFICATION |
ISO 14993:2001
|
Corrosion of metals and alloys Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions |
EN 10327:2004
|
Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
EN 10326:2004
|
Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
EN 10163-2:2004
|
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
EN 10163-1:2004/AC:2007
|
DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS |
EN 13438:2013
|
Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
ISO 21207:2015
|
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying |
ISO 16701:2015
|
Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
NEN 5335 : 1970
|
TEST METHODS FOR PAINTS - DETERMINATION OF CHIP RESISTANCE BY FALLING HEXAGONAL NUTS |
EN ISO 16701:2015
|
Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
EN 10021:2006
|
General technical delivery conditions for steel products |
EN 10163-3:2004
|
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
ISO 1518:1992
|
Paints and varnishes Scratch test |
ISO 2815:2003
|
Paints and varnishes Buchholz indentation test |
EN ISO 1520:2006
|
Paints and varnishes - Cupping test (ISO 1520:2006) |
EN 10130:2006
|
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
EN ISO 2063:2005
|
Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
ISO 6272-1:2011
|
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
EN ISO 2815:2003
|
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests |
EN ISO 8504-1:2001
|
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000) |
ISO 8289:2000
|
Vitreous and porcelain enamels Low voltage test for detecting and locating defects |
EN ISO 1518:2000
|
Paints and varnishes - Scratch test (ISO 1518:1992) |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
ASTM D 3359 : 2017 : REDLINE
|
Standard Test Methods for Rating Adhesion by Tape Test |
EN ISO 6272-1:2011
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |