EN 10163-2:2004

Current

Current The latest, up-to-date edition.

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats

Available format(s):

Language(s):

Published date: 08-12-2004

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Classification
6 Requirements
  6.1 Depth and affected area of discontinuities
  6.2 Repair requirements
      6.2.1 Class A
      6.2.2 Class B
  6.3 Repair procedures
      6.3.1 General
      6.3.2 Grinding
      6.3.3 Welding
Annex A (informative) Classes and subclasses for surface
        conditions with their respective requirements

Abstract - (Show below) - (Hide below)

This Part 2 in addition to Part 1 of this European Standard specifies the delivery requirements which apply to the surface condition of hot-rolled plates and surface condition of the faces of wide flats with thicknesses of 3 mm = t = 400 mm.NOTEFor plates with a thickness > 400 mm special agreements should be made at the time of the order.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 459/SC 3
Development Note	Supersedes NS 10014 (07/2004)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current
Supersedes	NS 10014 : 1987 EURONORM 163 : 1983 NFA 46 505 : 1984

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
I.S. EN 10163-2:2005	Identical
NEN EN 10163-2 : 2004	Identical
UNE-EN 10163-2:2007	Identical
NS EN 10163-2 : 2ED 2005	Identical
BS EN 10163-2:2004	Identical
NF EN 10163-2 : 2005	Identical
SN EN 10163-2 : 2005	Identical
UNI EN 10163-2 : 2005	Identical
DIN EN 10163-2:2005-03	Identical
NBN EN 10163-2 : 2005	Identical
PN EN 10163-2 : 2007	Identical
UNI EN 10163-2:1992	Identical
UNE 36040-2:1992	Identical
UNE-EN 10163-2:2004	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 10149-1:2013-12	HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNE-EN 10343:2010	Steels for quenching and tempering for construction purposes - Technical delivery conditions
00/714923 DC : DRAFT OCT 2000	PREN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
14/30273517 DC : 0	BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS
PREN 10207 : DRAFT 2015	STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
EN 15773:2018	Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
I.S. EN 10025-2:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
11/30239473 DC : 0	BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
08/30190326 DC : DRAFT DEC 2008	BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
EN 10085:2001	Nitriding steels - Technical delivery conditions
09/30156692 DC : 0	BS EN 10029 - HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
08/30175210 DC : DRAFT APR 2008	BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
BS EN 10343:2009	Steels for quenching and tempering for construction purposes. Technical delivery conditions
00/714924 DC : DRAFT OCT 2000	PREN 10025-6 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
11/30239488 DC : 0	BS EN 10025-6 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS
DIN EN 10025-4:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 10083-1:2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN 10025-6 : 2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
BS EN 10083-3 : 2006-08	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
PREN 10025-5 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
PREN 10028-1 : DRAFT 2014	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
BS EN 13001-3-1 : 2012	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
ISO 2063-1:2017	Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems
15/30320416 DC : 0	BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10025-6:2004+A1:2009	Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
ISO/TR 25107:2006	Non-destructive testing Guidelines for NDT training syllabuses
DIN EN 10163-1:2005-03	DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
BS EN 10095 : 1999-07	HEAT RESISTING STEELS AND NICKEL ALLOYS
BS EN 10025-2:2004	Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels
BS EN 10113-1:1993	Hot-rolled products in weldable fine grain structural steels General delivery conditions
BS EN 10025-3:2004	Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
BS EN 10029:2010	Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
I.S. EN 10084:2008	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
EN 10149-1:2013	Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
DIN EN 10025-5:2005-02	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 10163-1:2004/AC:2007	DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
EN 10088-4:2009	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10025-1:2004	Hot rolled products of structural steels - Part 1: General technical delivery conditions
DIN EN 10025-4:2005-02	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
DIN EN 1090-2:2011-10	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 13001-3-1:2012+A2:2018	Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
DIN EN 10025-6:2009-08	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
EN 10207:2017	Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
EN 10028-1:2017	Flat products made of steels for pressure purposes - Part 1: General requirements
EN 10083-2:2006	Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
PREN 10025-3 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
DIN EN 10088-4:2010-01	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
UNI EN 10025-6 : 2009	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
11/30239494 DC : 0	BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
98/712789 DC : DRAFT AUG 98	PREN 10302 - CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
PREN 10088-2 : DRAFT 2011	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
PREN 1090-2 : DRAFT 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
05/30132585 DC : DRAFT APR 2005	EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
PREN 10029 : DRAFT 2009	HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 10025-2:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
UNE-EN 1090-2:2011	Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
DIN EN 10025-3:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 13001-3-1:2012	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
BS EN 10025-4:2004	Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
PREN 10149-2 : DRAFT 2011	HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
17/30346741 DC : 0	BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES
BS EN ISO 2063-1:2017	Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems
BS EN 10025-6:2019	Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
UNE-EN 10088-4:2010	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
UNI EN 1090-2 : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10083-1:2006	Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 10025-3:2004	Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
DIN EN 10302:2008-06	Creep resisting steels, nickel and cobalt alloys
BS EN 10025-5:2004	Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance
BS EN 10155:1993	Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
I.S. EN 10029:2010	HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 10028-1:2017-10	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 10088-2:2014-12	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 10163-1:2005	DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
I.S. EN 10149-1:2013	HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 10083-2:2006	STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
DIN EN 10083-3:2007-01	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
DIN EN 10025-1:2005-02	Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
I.S. EN 10028-1:2017	FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 10302:2008	CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
DIN EN 10083-2:2006-10	STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
UNI EN 10029 : 2011	Hot rolled steel sheets with a thickness greater than or equal to 3 mm - Tolerances on dimensions and shape
11/30239491 DC : 0	BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
11/30239479 DC : 0	BS EN 10025-3 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
00/714922 DC : DRAFT OCT 2000	PREN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 15773:2018	INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
16/30323507 DC : 0	BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
05/30126202 DC : 0	EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
PREN 10025-4 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
15/30331537 DC : 0	BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
11/30239482 DC : 0	BS EN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
01/715451 DC : DRAFT NOV 2001	PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
05/30132920 DC : DRAFT APR 2005	EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES
UNI EN 13001-3-1 : 2013	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
05/30132603 DC : DRAFT APR 2005	EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
I.S. EN 10085:2001	NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 13001-3-1:2013-12	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
UNE-EN 10029:2011	Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
UNI EN 15773 : 2009	INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES (DUPLEX SYSTEMS) - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
CEN ISO/TR 25107:2006	Non-destructive testing - Guidelines for NDT training syllabuses (ISO/TR 25107:2006)
I.S. EN 10025-3:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
EN ISO 2063-1:2017	Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017)
UNE-EN 15773:2010	Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
PREN 10025-2 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN 1090-2:2008+A1:2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10025-2:2004/AC:2005	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
DIN EN 1090-2:2015-07 (Draft)	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1090-2 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 10225:2009	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10088-2:2015	Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
DIN EN 10083-1:2006-10	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN 10163-1:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections General requirements
UNE-EN 10225:2010	Weldable structural steels for fixed offshore structures - Technical delivery conditions
UNI EN 10225 : 2009	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
UNI EN 10083-1 : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 10083-3 : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
UNI EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10084 : 2008	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
UNI EN 10302 : 2008	CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
UNI EN 10149-1 : 2013	HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10343:2009-07	STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
98/705399 DC : DRAFT MAR 1998	PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS
I.S. EN 10025-1:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
NF ENV 1090-1 : 96 FD	EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
UNI EN 10343 : 2009	STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
BS EN 10088-4:2009	Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
AEP-55 VOL 3 PART I : 2014	PROCEDURES FOR EVALUATING THE PROTECTION LEVEL OF ARMOURED VEHICLES - IED THREAT
PREN 10025-6 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS
I.S. EN 10025-4:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 10088-4:2009	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
UNI CEN ISO/TR 25107 : 2012	NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES
I.S. EN ISO 2063-1:2017	THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017)
I.S. EN 10207:2017	STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
KTA 3211.1 : 2015	PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
NF EN 1090-2 : 2009 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 10207:2017	Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
PREN 10149-1 : DRAFT 2011	HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
EN 10083-3:2006/AC:2008	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
EN 10025-4:2004	Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
I.S. CEN ISO TR 25107:2006	NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES
NF EN 10225 : 2009	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
DIN EN 10029:2011-02	Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
DIN EN 10084:2008-06	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10225:2009-10	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
DIN EN 10085:2001-07	Nitriding steels - Technical delivery conditions; English version of DIN EN 10085
BS EN 10025-1:2004	Hot rolled products of structural steels General technical delivery conditions
BS EN 10084 : 2008-06	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 10083-2:2006	Steels for quenching and tempering Technical delivery conditions for non alloy steels
BS EN 10083-1:2006	Steels for quenching and tempering General technical delivery conditions
UNE-EN 10149-1:2014	Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
BS EN 10085 : 2001-05	NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10028-1:2017	Flat products made of steels for pressure purposes - Part 1: General requirements
BS EN 10149-1:2013	Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions
EN 10225:2009	Weldable structural steels for fixed offshore structures - Technical delivery conditions
I.S. EN 10025-6:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
11/30239476 DC : 0	BS EN 10025-2 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
DIN EN 10025-6:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
98/705400 DC : DRAFT MAR 1998	PREN 10025-2 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS
PREN 15773 : DRAFT 2016	INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
14/30312182 DC : 0	BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
11/30254171 DC : 0	BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 10025-5:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
11/30239485 DC : 0	BS EN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
PD CEN ISO/TR 25107:2006	Non-destructive testing. Guidelines for NDT training syllabuses
DIN EN 10025-5:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
05/30132598 DC : DRAFT APR 2005	EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
PREN 10025-1 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 1090-2:2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 10343:2009	STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
EN 10025-5:2004	Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
UNI EN 10088-4 : 2009	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 10083-3:2006	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
DIN EN 10025-1:2011-04 (Draft)	Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
DIN EN 10083-1 E : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN 10088-2:2014	Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
BS EN 10225:2009	Weldable structural steels for fixed offshore structures. Technical delivery conditions
BS EN 10302:2008	Creep resisting steels, nickel and cobalt alloys
BS EN 10028-1:2017	Flat products made of steels for pressure purposes General requirements
EN 10084:2008	Case hardening steels - Technical delivery conditions
EN 10343:2009	Steels for quenching and tempering for construction purposes - Technical delivery conditions
EN 10095:1999	Heat resisting steels and nickel alloys
EN 10302:2008	Creep resisting steels, nickel and cobalt alloys
EN 10029:2010	Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape

Standards Referencing This Book - (Show below) - (Hide below)

EN 10051:2010	Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10029:2010	Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10163-1:2004/AC:2007	DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart