Skip to content
Please enter a keyword to search

  • 09/30180290 DC : 0

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES

    Available format(s):  Hardcopy, PDF

    Superseded date:  31-08-2010

    Language(s):  English

    Published date: 

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Modification to the Foreword
    2 Modification to the Introduction
    3 Modification to the Scope
    4 Modification to Clause 2, Normative references
    5 Modifications (except Clause 2) regarding new
       referenced standards
    6 Modification to Clause 3, Terms and Definitions
    7 Modifications to Clause 4
    8 Modification to 5.1.1
    9 Modification to 5.1.5
    10 Modification to 5.1.7
    11 Modification to Table 1 of Clause 5
    12 Addition of a new sub-clause 5.6
    13 Modification to Clause 7, Information for use
    14 Modification to Annex B
    15 Addition of new Annex ZB
    16 Modification to the Bibliography

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee MCE/3/10
    Document Type Draft
    Publisher British Standards Institution
    Status Superseded
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements
    EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
    EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
    ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
    ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
    EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
    EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
    IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment
    EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
    ISO 14731:2006 Welding coordination Tasks and responsibilities
    EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
    EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
    ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
    ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
    EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
    EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
    EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
    EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
    EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
    EN ISO 14731:2006 Welding coordination - Tasks and responsibilities (ISO 14731:2006)
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)
    EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    EN ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
    ISO 7745:2010 Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use
    CLC/TR 50404:2003 Electrostatics - Code of practice for the avoidance of hazards due to static electricity
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective