EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
|
EN 444:1994
|
Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
|
EN 12454 : 1998
|
FOUNDING - VISUAL EXAMINATION OF SURFACE DISCONTINUITIES - STEEL SAND CASTINGS
|
EN 15714-1:2009
|
Industrial valves - Actuators - Part 1: Terminology and definitions
|
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
|
ASTM E 446 : 2015 : REDLINE
|
Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
|
ASTM E 186 : 2015 : REDLINE
|
Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
|
EN 13445-5 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
|
EN 1013:2012+A1:2014
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
|
EN 10213:2007+A1:2016
|
Steel castings for pressure purposes
|
EN ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
|
EN 1349:2009
|
Industrial process control valves
|
AD 2000-Merkblatt A 4:2015-11
|
ACCESSORY HOUSINGS
|
EN 12266-2:2012
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
|
EN 462-3:1996
|
Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes for ferrous metals
|
EN 764-5:2014
|
Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
|
EN 473:2008
|
Non-destructive testing - Qualification and certification of NDT personnel - General principles
|
AD 2000-MERKBLATT W5:2009
|
CAST STEEL
|
PREN 12516-2 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
|
EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes
|
EN ISO 9934-1:2016
|
Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
|
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
|
EN ISO 11970:2016
|
Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016)
|
EN 13445-4 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
|
EN 1370:2011
|
Founding - Examination of surface condition
|
EN 1559-2:2014
|
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
|
EN 12516-3:2002/AC:2003
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD
|
EN 1371-1:2011
|
Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
|
EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General
|
EN 1371-2:2015
|
Founding - Liquid penetrant testing - Part 2: Investment castings
|
EN 583-1:1998/A1:2003
|
NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - GENERAL PRINCIPLES
|
EN 1515-4:2009
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
|
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
|
EN ISO 3651-2 : 1998
|
DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
|
EN ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
|
EN 13480-8:2017
|
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
|
EN 1369:2012
|
Founding - Magnetic particle testing
|
EN 462-1:1994
|
Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
|
EN 12681 : 2003
|
FOUNDING - RADIOGRAPHIC EXAMINATION
|
EN 13018:2016
|
NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES
|
EN 545:2010
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
|
PREN 12516-4 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
|
EN 571-1:1997
|
Non destructive testing - Penetrant testing - Part 1: General principles
|
EN 1418:1997
|
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
|
EN 19:2016
|
Industrial valves - Marking of metallic valves
|
EN 1982:2017
|
Copper and copper alloys - Ingots and castings
|
EN 764-4:2014
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
|
EN 12163:2016
|
Copper and copper alloys - Rod for general purposes
|
EN 1435:1997/A2:2003
|
NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
|
EN 1561:2011
|
Founding - Grey cast irons
|
PREN 12516-1 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
|
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels
|