ASTM E 446 : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
29-12-2020
English
22-09-2015
CONTAINED IN VOL. 03.03, 2017 Specifies various categories, types, and severity levels of discontinuities occurring in steel castings that have section thicknesses up to 2 in. (50.8 mm).
Committee |
E 07
|
DevelopmentNote |
Supersedes ASTM E 71 (12/2001)
|
DocumentType |
Redline
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1These reference radiographs2 illustrate various categories, types, and severity levels of discontinuities occurring in steel castings that have section thicknesses up to 2 in. (50.8 mm) (see Note 2). The reference radiograph films are an adjunct to this standard and must be purchased separately from ASTM International, if needed (see 2.2). Categories and severity levels for each discontinuity type represented by these reference radiographs are described in 1.3.
Note 1:The basis of application for these reference radiographs requires a prior purchaser supplier agreement of radiographic examination attributes and classification criterion as described in Sections 4, 6, and 7 of this standard.
Note 2:Reference radiographs previously used for this thickness range carried the designation E71, but included a now rarely used gamma source, that is, radium. The current document is also updated by inclusion of several recognized shrinkage or C categories and by elimination of the crack and hot tear categories except for one example of each of these discontinuity types. Reference radiographs for thicker sections may be found in Reference Radiograph standards E186 and E280. Reference Radiograph standards E446 and E186 provide some overlap of severity levels for similar discontinuity categories within the same energy level range (see 4.2, 5.1, and 6.3).
1.2These film reference radiographs are not intended to illustrate the types and degrees of discontinuities found in steel castings when performing digital radiography. If performing digital radiography of steel castings up to 2 in. (50.8 mm) in thickness, refer to Digital Reference Image Standard E2868.
1.3These reference radiographs consist of three separate volumes (see Note 3) as follows: (I) medium voltage (nominal 250-kV) X-rays. (II) 1-MV X-rays and Iridium-192 radiation, and (III) 2-MV to 4-MV X-rays and cobalt-60 radiation. Unless otherwise specified in a purchaser supplier agreement (see 1.1), each volume is for comparison only with production radiographs produced with radiation energy levels within the thickness range covered by this standard. Each volume consists of six categories of graded discontinuities of increasing severity level and four categories of ungraded discontinuities. Reference radiographs containing ungraded discontinuities are provided as a guide for recognition of a specific casting discontinuity type where severity levels are not needed. Following is a list of discontinuity categories, types and severity levels for the adjunct reference radiographs of this standard:
1.3.1Category A—Gas porosity; severity levels 1 through 5.
1.3.2Category B—Sand and slag inclusions; severity levels 1 through 5.
1.3.3Category C—Shrinkage; 4 types:
1.3.3.1Ca—linear shrinkage—Severity levels 1 through 5.
1.3.3.2Cb—feathery shrinkage—Severity levels 1 through 5.
1.3.3.3Cc—sponge shrinkage—Severity levels 1 through 5.
1.3.3.4Cd—combinations of linear, feathery and sponge shrinkage—Severity levels 1 through 5.
1.3.4Category D—Crack; 1 illustration.
1.3.5Category E—Hot tear; 1 illustration.
1.3.6Category F—Insert; 1 illustration.
1.3.7Category G—Mottling; 1 illustration.
Note 3:The reference radiographs consist of the following:
Volume I: Medium Voltage (nominal 250 kVp) X-ray Reference Radiographs—set of 34 illustrations (nominal 5 by 7 in.) in a 15 by 17-in. ring binder.
Volume II: 1-MV X-rays and Iridium-192 Reference Radiographs—Set of 34 illustrations (nominal 5 by 7 in.) in a 15 by 17-in. ring binder.
Volume III: 2-MV to 4-MV X-rays and Cobalt-60 Reference Radiographs—Set of 34 illustrations (nominal 5 by 7 in.) in a 15 by 17-in. ring binder.
Note 4:Although Category G–Mottling is listed for all three volumes, the appearance of mottling is dependent on the level of radiation energy. Mottling appears reasonably prominent in Volume I; however, because of the higher radiation energy levels mottling may not be apparent in Volume II nor Volume III.
1.4From time to time, there may be minor changes to the process for manufacturing of the reference radiograph adjunct materials. These changes could include changes in the films or processing chemicals used, changes in the dies or printing for the cardboard mats, etc.; however, in all cases, these changes are reviewed by the Illustration Monitoring Subcommittee and all reference radiographs are reviewed against a fixed prototype image to ensure that there are no changes to the acceptance level represented by the reference radiographs. Therefore, the adjunct reference radiographs remain valid for use with this standard regardless of the date of production or the revision level of the text standard.
1.5The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM A 436 : 1984 : R2006 | Standard Specification for Austenitic Gray Iron Castings |
SAE AS7114/4A | NADCAP Requirements for Nondestructive Testing Facility Radiography |
06/30125909 DC : DRAFT OCT 2006 | ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
MIL-A-53079 Base Document:1989 | ANCHOR, NAVMOOR CAUSEWAY MOORING |
MIL-STD-2175 Revision A:1993 | CASTING, CLASSIFICATION AND INSPECTION OF |
ENA TS 62-3 : ISSUE 1 1983 | MAIN CIRCULATING WATER PUMP IMPELLER CASTINGS |
ESI 66-2 : ISSUE 2 | 2.25 CHROMIUM, MOLYBDENUM, STEEL CASTINGS FOR STEAM TURBINES |
ASTM B 752 : 2006 : R2011 : EDT 1 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
07/30143650 DC : 0 | BS ISO 4993 - STEEL AND IRON CASTINGS - RADIOGRAPHIC INSPECTION |
DIN EN 2002-21:2000-07 (Draft) | AEROSPACE SERIES - METALLIC MATERIALS; TEST METHODS - PART 21: RADIOGRAPHIC TESTING OF CASTINGS |
08/30132226 DC : DRAFT MAR 2008 | BS ISO 13535 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - HOISTING EQUIPMENT |
ASTM E 1030 : 2005 : R2011 | Standard Test Method for Radiographic Examination of Metallic Castings |
99/710246 DC : JUL 99 | PREN 2002-21 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 21: RADIOGRAPHIC TESTING OF CASTINGS |
BS ISO 4993:2015 | Steel and iron castings. Radiographic testing |
ASTM A 660 : 1996 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
MIL-Q-45970 Revision A:1975 | QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL |
API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
ASTM E 1030 : 2005 | Standard Test Method for Radiographic Examination of Metallic Castings |
NFF 11 415 : 1990 | RAILWAY ROLLING STOCK - BRAKE DISCS WITH CAST IRON RING |
DEFSTAN 95-25/1(2000) : 2000 | ARMOUR QUALITY STEEL CASTINGS |
ASTM E 1030/E1030M : 2015 : REDLINE | Standard Practice for Radiographic Examination of Metallic Castings |
ASTM E 689 : 2015 : REDLINE | Standard Reference Radiographs for Ductile Iron Castings |
ASTM A 660 : 1996 : R2005 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM E 272 : 2015 : REDLINE | Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
ASTM A 395/A395M : 1999 : R2014 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
EN 12681-1:2017 | Founding - Radiographic testing - Part 1: Film techniques |
EN 12681:2003 | Founding - Radiographic examination |
ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
DEFSTAN 95-28/2(2004) : 2004 | SPROCKET RINGS |
ASTM A 395/A395M : 1999 : R2018 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
MIL-W-63150 Base Document:1977 | WEAPONS AND SUPPORT MATERIAL STANDARD QUALITY ASSURANCE PROVISIONS FOR |
QQ-S-681 Revision F:1974 | FEDERAL SPECIFICATION STEEL CASTINGS |
BS EN 15689:2009 | Railway applications. Track. Switches and crossings. Crossing components made of cast austenitic manganese steel |
API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
API 16C CHINESE : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
MIL-STD-278 Revision F:1987 | WELDING AND CASTING STANDARD |
API 16C RUSSIAN : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
I.S. EN 15689:2009 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - CROSSING COMPONENTS MADE OF CAST AUSTENITIC MANGANESE STEEL |
API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
ENA TS 56-1 : ISSUE 2 1989 | FERRITIC STEEL VALVE CASTING |
13/30252106 DC : 0 | BS ISO 4993 - STEEL AND IRON CASTINGS - RADIOGRAPHIC INSPECTION |
08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
ASTM A 872/A872M : 2014 : REDLINE | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments |
11/30249105 DC : 0 | BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
17/30244737 DC : 0 | BS EN 17149 - RAILWAY APPLICATIONS - FATIGUE STRENGTH ASSESSMENT OF RAILWAY VEHICLE STRUCTURES BASED ON CUMULATIVE DAMAGE |
ASTM E 802 : 2015 : REDLINE | Standard Reference Radiographs for Gray Iron Castings Up to 4<fraction><num>1</num><den>2</den> </fraction> in. (114 mm) in Thickness |
SAE AMS5351G | Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered |
07/30165591 DC : 0 | BS EN 15689 - RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - CAST AUSTENITIC MANGANESE STEEL FOR CROSSING COMPONENTS |
API 672 : 2004 | PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
ISO 10433:1994 | Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
I.S. EN 16668:2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
UNE-EN 16668:2016 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
I.S. EN 12516-1:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
ASTM A 476/A476M : 2000 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
ASTM A 660 : 1996 : R2001 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM A 476/A476M : 2000 : R2005 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
ASTM A 436 : 1984 : R2015 | Standard Specification for Austenitic Gray Iron Castings |
ASTM A 436 : 1984 : R1997 : EDT 1 | Standard Specification for Austenitic Gray Iron Castings |
ASTM A 476/A476M : 2000 : R2014 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
ASTM A 436 : 1984 : R2011 | Standard Specification for Austenitic Gray Iron Castings |
ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
BS EN ISO 13535:2001 | Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment |
I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
DIN EN 1559-3:2012-01 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
I.S. EN 1559-3:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS |
I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
ASME B31.1 : 2016 | POWER PIPING |
ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
BS 806:1993 | Specification for design and construction of ferrous piping installations for and in connection with land boilers |
BS 806:1990 | Specification for design and construction of ferrous piping installations for and in connection with land boilers |
ASME B31.3:2016 | PROCESS PIPING |
MIL-STD-1688 Revision A:1990 | FABRICATION, WELDING, AND INSPECTION OF HY-80/100 SUBMARINE APPLICATIONS |
ESI 62-1 : ISSUE 1 | BOILER FEED PUMP IMPELLER CASTINGS |
ESI 56-1 : ISSUE 2 | FERRITIC STEEL VALVE CASTINGS |
16/30313948 DC : 0 | BS ISO 18139 - SHIPS AND MARINE TECHNOLOGY - GLOBE VALVES FOR USE IN LOW TEMPERATURE APPLICATIONS - DESIGN AND TESTING REQUIREMENTS |
NFF 11 416 : 1994 | RAILWAY ROLLING STOCK - BRAKE DISCS WITH STEEL RING |
ENA TS 66-3 : ISSUE 1 1989 | CARBON STEEL CASTINGS FOR STEAM TURBINES |
ENA TS 66-1 : ISSUE 2 1989 | 0.5 CHROMIUM, MOLYBDENUM, VANADIUM STEEL CASTINGS FOR STEAM TURBINES |
00/714962 DC : DRAFT OCT 2000 | PREN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOF STEEL VALVE SHELLS |
DIN 65034:1992-06 | Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design |
AISC 358 : 2016 | PREQUALIFIED CONNECTIONS FOR SPECIAL AND INTERMEDIATE STEEL MOMENT FRAMES FOR SEISMIC APPLICATIONS |
MIL-P-45971 Base Document:1975 | PRODUCT ENGINEERING QUALITY ENGINEERING SYSTEM (PEQES) FOR WEAPONS AND SUPPORT MATERIAL |
SAE AMS5348C | Steel Castings, Tubular, Centrifugal, Corrosion Resistant 15Cr - 4.6Ni - 0.22 (Cb+Ta) - 2.8Cu Solution Heat Treated |
ASTM A 395/A395M : 1999 : EDT 1 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
MIL-STD-1265 Revision A:1987 | RADIOGRAPHIC INSPECTION, CLASSIFICATION AND SOUNDNESS REQUIREMENTS FOR STEEL CASTINGS |
ASTM A 356/A356M : 2011 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
UNI EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
SAE AS7100/1B | National Aerospace and Defense Contractors Accreditation Program (NADCAP) Survey Checklists for the NDT Suppliers Accreditation Program |
DEFSTAN 95-25/2(2004) : 2004 | ARMOUR QUALITY STEEL CASTINGS |
ASTM A 660/A660M : 2011 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
UNE-EN 15689:2011 | Railway applications - Track - Switches and crossings - Crossing components made of cast austenitic manganese steel |
BS EN 12681-1:2017 | Founding. Radiographic testing Film techniques |
API 6AR : 1994 | RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
ASTM A 660/A660M : 2011 : R2016 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM A 781/A781M : 2018-02 | SPECIFICATION FOR CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE |
ASTM A 660 : 1996 : R2010 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ISO 4993:2015 | Steel and iron castings — Radiographic testing |
DIN EN 12681:2003-06 | FOUNDING - RADIOGRAPHIC EXAMINATION |
BS EN ISO 14693:2003 | Petroleum and natural gas industries. Drilling and well-servicing equipment |
EEMUA 176 : 1998 | SPECIFICATION FOR STRUCTURAL CASTINGS FOR USE OFFSHORE |
API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
API 14D : 1994 | SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
API 6RS : 1ED 90 SUPP 1 | BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
UNI EN 1559-3 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS |
MSS SP 147 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS USED IN STANDARD CLASS STEEL VALVES - SAMPLING METHOD FOR EVALUATING CASTING QUALITY |
DIN EN 15689:2010-04 | Railway applications - Track - Switches and crossings - Crossing components made of cast austenitic manganese steel |
API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
I.S. EN 12681:2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
13/30287824 DC : 0 | BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
ASTM A 436 : 1984 : R2001 | Standard Specification for Austenitic Gray Iron Castings |
API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
ASTM A 395/A395M : 1999 : R2009 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
BS ISO 18139:2017 | Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements |
ENA TS 66-2 : ISSUE 1 1989 | 2.25 CHROMIUM, MOLYBDENUM, STEEL CASTINGS FOR STEAM TURBINES |
MIL-I-46175 Revision A:1983 | |
09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
SAE AMS 2175 : 2010 | CASTINGS, CLASSIFICATION AND INSPECTION OF |
SAE AMS 5361G : 2013(S 2019) | STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 13.5NI - 2.1MO, SOLUTION HEAT TREATED |
MIL-STD-453 Revision C:1984 | INSPECTION, RADIOGRAPHIC |
I.S. EN 12681-1:2017 | FOUNDING - RADIOGRAPHIC TESTING - PART 1: FILM TECHNIQUES |
PREN 2002-21 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 21: RADIOGRAPHIC TESTING OF CASTINGS |
API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
BS EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
ISO 18139:2017 | Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements |
EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
UNE-EN 12516-1:2016 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
ASTM A 395/A395M : 1999 : R2004 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
ASTM B 752 : 2006 : R2011 : EDT 2 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
API 7K CHINESE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
ASTM A 356/A356M : 2011 : R2016 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
UNE-EN 1559-3:2012 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
BS EN 12681:2003 | Founding. Radiographic examination |
ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
ISO 14693:2003 | Petroleum and natural gas industries — Drilling and well-servicing equipment |
EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
EN 16668:2016+A1:2018 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
EN 15689:2009 | Railway applications - Track - Switches and crossings - Crossing components made of cast austenitic manganese steel |
EN ISO 14693:2003 | Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003) |
EN ISO 13535:2000 | Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
SAE J435_201801 | Automotive Steel Castings |
SAE AMS5363F | Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr - 10.5Ni - 0.90 (Cb+Ta) Solution Heat Treated |
ESI 66-1 : ISSUE 2 | 0.5 CHROMIUM, MOLYBDENUM, VANADIUM STEEL CASTINGS FOR STEAM TURBINES |
ESI 62-3 : ISSUE 1 | MAIN CIRCULATING WATER PUMP IMPELLER CASTINGS |
ESI 66-3 : ISSUE 1 | CARBON STEEL CASTINGS FOR STEAM TURBINES |
ENA TS 62-1 : ISSUE 1 1981 | BOILER FEED PUMP IMPELLER CASTING |
MIL-HDBK-1265 Base Document:1998 | RADIOGRAPHIC INSPECTION, CLASSIFICATION AND SOUNDNESS REQUIREMENTS FOR STEEL CASTINGS |
03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
17/30324747 DC : 0 | BS ISO 19037 - SHIPS AND MARINE TECHNOLOGY - GATE VALVES FOR USE IN LOW TEMPERATURE APPLICATIONS - DESIGN AND TESTING REQUIREMENTS |
BS 5998:1983 | Specification for quality levels for steel valve castings |
SAE AMS5389D | Alloy Castings, Sand, Corrosion and Heat Resistant 55Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V Solution Heat Treated |
MSS SP 54 : 2013 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - RADIOGRAPHIC EXAMINATION METHOD |
ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
API 7NRV CHINESE : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
ASTM B 752 : 2006 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
API 7NRV : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
API 7NRV : 2006 : R2012 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
SAE AMS5373E | Alloy Castings, Sand, Corrosion and Heat Resistant 16Co - 29Cr - 4.5W As Cast |
API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
SAE AMS5395D | Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 - 3.0C) As Cast |
DIN EN 12516-1:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
SAE AMSSTD2175A | Castings, Classification and Inspection of |
ASTM E 2868 : 2017 : REDLINE | Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness |
ASTM B 367:2013 | Standard Specification for Titanium and Titanium Alloy Castings |
ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
UNI EN 15689 : 2010 | RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - CROSSING COMPONENTS MADE OF CAST AUSTENIC MANGANESE STEEL |
API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
ASTM A 476/A476M : 2000 : R2018 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
ASTM A 476/A476M : 2000 : R2009 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
API 7K REDLINE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
BS EN 1559-3:2011 | Founding. Technical conditions of delivery Additional requirements for iron castings |
ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
ASTM E 242 : 2015 : REDLINE | Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed |
ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
ASTM E 2868 : 2017 : REDLINE | Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.