14/30273514 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS ISO 18249 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - TESTING OF FIBRE REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
Hardcopy , PDF
30-04-2015
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Personnel qualification
5 Acoustic emission sources and acoustic behaviour
6 Instrumentation and monitoring guidelines
7 Specific methodology
8 Interpretation of acoustic emission results/source
mechanisms
9 Documentation
Bibliography
BS ISO 18249
Committee |
WEE/46
|
DocumentType |
Draft
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
ASTM E 2076 : 2005 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
EN 13677-3:2003 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
EN 13554:2011 | Non-destructive testing - Acoustic emission testing - General principles |
EN ISO 3673-2:2012 | Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012) |
EN ISO 1043-3:1999 | Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996) |
EN 13002-2:1999 | Carbon fibre yarns - Part 2: Test methods and general specifications |
EN 15495:2007 | Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources |
EN 1330-2:1998 | Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
ASTM E 1888/E1888M : 2017 : REDLINE | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
EN ISO 1043-2:2011 | Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011) |
EN 12971-3:1999 | Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements |
EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
EN 13473-3:2001 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements |
EN 13473-1:2001 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation |
EN 13417-3:2001 | Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements |
EN 13477-1:2001 | Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1: Equipment description |
EN 14020-1:2002 | Reinforcements - Specification for textile glass rovings - Part 1: Designation |
EN 13417-1:2001 | Reinforcement - Specifications for woven fabrics - Part 1: Designation |
EN 1330-9:2017 | Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing |
EN 12654-1:1998 | Textile glass - Yarns - Part 1: Designation |
EN 12971-1:1999 | Reinforcements - Specification for textile glass chopped strands - Part 1: Designation |
EN 13477-2:2010 | Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic |
EN 13473-2:2001 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements |
EN 14584:2013 | Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources |
EN 14118-2:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
EN 13003-1:1999 | Para-aramid fibre filament yarns - Part 1: Designation |
EN 1330-1:2014 | Non destructive testing - Terminology - Part 1: List of general terms |
EN 13677-1:2003 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation |
EN 12654-2:1998 | Textile glass - Yarns - Part 2: Methods of test and general specifications |
EN 12971-2:1999 | Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements |
EN 13003-3:1999 | Para-aramid fibre filament yarns - Part 3: Technical specifications |
EN 14118-1:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation |
EN ISO 3673-1:1999 | Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996) |
ASTM D 3039/D3039M : 2017 : REDLINE | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
EN 13417-2:2001 | Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements |
EN 13677-2:2003 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements |
EN 13003-2:1999 | Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications |
EN 14118-3:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements |
EN 12654-3:1998 | Textile glass - Yarns - Part 3: General requirements for general applications |
EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.