ISO 11202:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
|
EN 13001-3-2:2014
|
Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
|
EN 755-1:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
|
EN 13557:2003+A2:2008
|
Cranes - Controls and control stations
|
ISO 4871:1996
|
Acoustics — Declaration and verification of noise emission values of machinery and equipment
|
ISO 11660-5:2001
|
Cranes — Access, guards and restraints — Part 5: Bridge and gantry cranes
|
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
|
ISO 15513:2000
|
Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors
|
ISO 12480-1:1997
|
Cranes — Safe use — Part 1: General
|
ISO 9926-1:1990
|
Cranes — Training of drivers — Part 1: General
|
EN 12644-2:2000+A1:2008
|
Cranes - Information for use and testing - Part 2: Marking
|
ISO 4306-1:2007
|
Cranes — Vocabulary — Part 1: General
|
ISO 7752-4:1989
|
Cranes Controls Layout and characteristics Part 4: Jib cranes
|
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
|
EN 894-2:1997+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
|
EN 755-9:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
|
EN 1991-3:2006/AC:2012
|
EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY
|
EN 349:1993+A1:2008
|
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
|
IEC 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
|
EN 13586:2004+A1:2008
|
Cranes - Access
|
EN 614-1:2006+A1:2009
|
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
|
EN ISO 13857:2008
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
|
EN ISO 11688-2 : 2000
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
|
ISO 12482:2014
|
Cranes Monitoring for crane design working period
|
EN 12644-1:2001+A1:2008
|
Cranes - Information for use and testing - Part 1: Instructions
|
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction
|
EN 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
|
EN ISO 11201:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
|
EN 13001-2:2014
|
Crane safety - General design - Part 2: Load actions
|
EN 15011:2011+A1:2014
|
Cranes - Bridge and gantry cranes
|
ISO 4309:2010
|
Cranes Wire ropes Care and maintenance, inspection and discard
|
EN 13001-1:2015
|
Cranes - General design - Part 1: General principles and requirements
|
EN ISO 3744:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
|
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
|
EN 515:2017
|
Aluminium and aluminium alloys - Wrought products - Temper designations
|
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
|
ISO 11203:1995
|
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
|
EN 13157:2004+A1:2009
|
Cranes - Safety - Hand powered cranes
|
EN 14492-2:2006+A1:2009/AC:2010
|
CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
|
EN ISO 12100:2010
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
|
EN ISO 4871:2009
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
|
EN 14238:2004+A1:2009
|
Cranes - Manually controlled load manipulating devices
|
EN 13001-3-3:2014
|
Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
|
EN 795:2012
|
Personal fall protection equipment - Anchor devices
|
PREN 13001-3-5 : DRAFT 2013
|
CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS
|
ISO 8566-4:1998
|
Cranes Cabins Part 4: Jib cranes
|
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
|
EN ISO 11202:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
|
EN ISO 11203:2009
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
|
ISO 11201:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
|
EN 755-2:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
|
EN 894-1:1997+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
|