API 1129 : 1996
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ASSURANCE OF HAZARDOUS LIQUID PIPELINE SYSTEM INTEGRITY
Hardcopy , PDF
01-01-2001
English
01-01-1996
Section 1 - General
1.1 Scope and purpose
1.2 Definitions
1.3 Referenced publications
1.4 Abbreviations and acronyms
Section 2 - Design and construction consideration for integrity
assurance
2.1 General
2.1.1 Pipelines, stations and appurtenances
2.1.2 Tanks, terminals and other storage facilities
2.2 Codes
2.2.1 General
2.2.2 Pipeline codes
2.2.3 Review process
2.2.4 Additional requirements
2.3 Specifications
2.3.1 General
2.3.2 General specifications
2.4 Pipeline route selection and environmental protection
2.4.1 Right-of-way considerations
2.5 Construction contractor/supplier considerations
2.6 Inspection
2.6.1 Purpose of inspections
2.6.2 Types of inspection and suggested reference codes
2.7 Records and documentation
Section 3 - System monitoring and control
3.1 General
3.2 Controls
3.2.1 Emergency flow restricting devices
3.2.2 Pressure safety devices
3.2.3 Devices for monitoring other operating parameters
3.2.4 Supervisory control and data acquisition systems
3.2.5 Communication systems
3.3 Leak detection
3.3.1 Computational pipeline monitoring
3.3.2 Station/terminal sensors
3.3.3 Monitoring of line conditions
3.4 Training/testing
3.4.1 General
3.4.2 Types of training
3.4.3 Validation of training
3.4.4 Substance abuse testing programs
3.4.5 Manuals and training
3.4.6 Operating records
3.4.7 Emergency response training
3.4.8 Other training
Section 4 - Corrosion control
4.1 Corrosion control design of new pipelines
4.1.1 General
4.1.2 Monitoring
4.1.3 Isolation factors
4.1.4 Coating systems
4.1.5 Construction
4.2 Coatings and linings
4.2.1 Coating selection
4.2.2 Coating system evaluations
4.2.3 Surface preparation specifications
4.2.4 Internal tank lining
4.3 Routine external corrosion control
4.3.1 Monitoring
4.3.2 Rectifier inspection
4.3.3 Other inspections
4.3.4 Close interval survey
4.4 Routine internal corrosion monitoring and control
methods
Section 5 - Inspection and review
5.1 General
5.1.1 Regulatory requirements
5.1.2 Additional operation and maintenance inspections
5.2 Risk assessment
5.2.1 Analysis
5.2.2 Results
5.3 Hydrostatic testing
5.3.1 General
5.3.2 Effectiveness
5.3.3 Hydrostatic testing programs
5.3.4 Implementation
5.3.5 Effects of hydrotesting
5.4 Internal inspection
5.4.1 General
5.4.2 Anomaly characterization
5.4.3 Frequency of inspection or inspection planning
5.4.4 In-line inspection capabilities
5.4.5 Limitations
5.4.6 Operating considerations
5.4.7 Correlation of in-line inspection and close interval
surveys
5.5 Tank integrity
5.6 Other reviews and analyses
5.6.1 Reviews
5.6.2 Audits
5.6.3 Failure analyses
5.6.4 Other analyses/reviews
Section 6 - Damage prevention
6.1 General
6.2 Surveillance
6.2.1 One-call systems
6.2.2 Aerial surveillance
6.2.3 Ground surveillance
6.3 Facility marking and maintenance
6.3.1 ROW and facility marking
6.3.2 ROW clearing
6.3.3 Encroachment mitigation
6.4 Public education and communication
Appendix A - Bibliography
Provides increased assurance of a pipeline system's integrity, covering design and construction considerations, system monitoring and controls, corrosion controls, inspections, reviews and audits, and damage prevention.
DocumentType |
Standard
|
Pages |
34
|
PublisherName |
American Petroleum Institute
|
Status |
Withdrawn
|
NACE RP 02 86 : 2002 | ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
API 1119 : 1991 | TRAINING AND QUALIFICATION OF LIQUID PIPELINE OPERATORS |
NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
API STD 598 : 2016 | VALVE INSPECTION AND TESTING |
AWWA C215 : 2016 | EXTRUDED POLYOLEFIN COATINGS FOR STEEL WATER PIPE |
ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
NACE RP 01 1975:1975 | CONTROL OF INTERNAL CORROSION IN STEEL PIPELINES AND PIPING SYSTEMS |
API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
AWWA C214 : 2014 | TAPE COATINGS FOR STEEL WATER PIPE |
ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
NACE RP 02 74 : 2004 | HIGH-VOLTAGE ELECTRICAL INSPECTION OF PIPELINE COATINGS |
API 5L : 2012 | LINE PIPE |
API 651 : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
API RP 1114 : 2013 | RECOMMENDED PRACTICE FOR THE DESIGN OF SOLUTION-MINED UNDERGROUND STORAGE FACILITIES |
NACE RP 05 72 : 0 | DESIGN, INSTALLATION, OPERATION AND MAINTENANCE OF IMPRESSED CURRENT DEEP GROUNDBEDS |
API SPEC 11N : 1994 | SPECIFICATION FOR LEASE AUTOMATIC CUSTODY TRANSFER (LACT) EQUIPMENT |
NACE RP 06 75 : 1988 | CORROSION CONTROL OF OFFSHORE STEEL PIPELINES |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NACE RP 04 90 : 0 | HOLIDAY DETECTION OF FUSION-BONDED EPOXY EXTERNAL PIPELINE COATINGS OF 250 TO 760 MICRON (10 TO 30 MILS) |
API 1107 : 1991 | PIPELINE MAINTENANCE WELDING PRACTICES |
NACE RP 01 69 : 2002 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
NACE RP 01 88 : 0 | DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
API 1110 : 2013 | RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF STEEL PIPELINES FOR THE TRANSPORTATION OF GAS, PETROLEUM GAS, HAZARDOUS LIQUIDS, HIGHLY VOLATILE LIQUIDS, OR CARBON DIOXIDE |
API 1123 : 1996 | DEVELOPMENT OF PUBLIC AWARENESS PROGRAMS BY HAZARDOUS LIQUID PIPELINE OPERATORS |
API 1109 : 2010 | LINE MARKERS AND SIGNAGE FOR HAZARDOUS LIQUID PIPELINES AND FACILITIES |
API 652 : 2014 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
API 1111 : 2015 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.