API 2510 : 2001 : R2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS
03-12-2018
01-01-2011
1 Scope
1.1 Retroactivity
1.2 Characteristics of LPG
1.3 Safety
2 Referenced Publications
3 Terms and Definitions
4 Design of LPG vessels
4.1 Applicable Design Construction Codes
4.2 Design Pressure and Temperature
4.3 Design Vacuum
4.4 Materials of Construction
4.5 Vessel Connections
4.6 Previously Constructed Vessels
5 Sitting Requirements and Spill Containment
5.1 Siting
5.2 Drainage
5.3 Spill Containment
5.4 Remote Impoundment
5.5 Diking
6 Foundations and Supports for LPG Storage vessels
and Related Piping
6.1 Applicable Codes and Specifications
6.2 Special Requirements
7 Tank Accessories, Including Pressure and
Vacuum-relieving devices
7.1 Mandatory Equipment
7.2 Tank Accessory Materials
8 Piping Requirements
8.1 American Society of Mechanical Engineers Code
for Pressure Piping
8.2 Pipe (Including Pressure Tubing and Excluding
Instrument Piping)
8.3 Fittings
8.4 Plugs
8.5 Unions
8.6 Valves
8.7 Location, Installation, and Flexibility of
Piping, Valves, and Fittings
9 Loading, Product Transfer and Unloading Facilities
9.1 Scope
9.2 Rates of Loading and Unloading
9.3 Transfer, Loading, and Unloading Equipment
9.4 Grounding and Bonding
9.5 Hose and Other Flexible Connectors for Product
Transfer
9.6 Blowdown or Venting of Loading and Unloading
Lines
9.7 Marking of Valves in Loading and Unloading
Systems
9.8 Metering Equipment Used in Loading and
Unloading
9.9 LPG Odorization
10 Fire Protection
10.1 General
10.2 Access for Fire Fighting
10.3 Fire Water Use
10.4 Fire Detection Systems
10.5 Fire Extinguishers
10.6 Fire-Fighting Foam
10.7 Fireproofing of LPG Vessels
10.8 Fireproofing of Structural Supports
10.9 Burying and Mounding
10.10 Electrical Installations and Equipment
10.11 Critical Wiring and Control Systems
10.12 Safety Precaution Signs
10.13 Lighting
10.14 Fencing
10.15 Roadways
11 Refrigerated Storage
11.1 General
11.2 Design Requirements
11.3 Siting Requirements
11.4 Thermal Considerations
11.5 Tank Accessories
11.6 Piping Requirements
11.7 Refrigeration System
Appendix A: Piping Valves, Fittings and Optional
Equipment
Describes the design, construction, and location of liquefied petroleum gas (LPG) installations at marine and pipeline terminals, natural gas processing plants, refineries, petrochemical plants and tank farms.
DocumentType |
Revision
|
ProductNote |
Reconfirmed 2011
|
PublisherName |
American Petroleum Institute
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
API 607 : 2016 | FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS |
API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
ASME B31.3:2016 | PROCESS PIPING |
ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
API 551 : 2016 | PROCESS MEASUREMENT |
NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
API 752 : 2009 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PERMANENT BUILDINGS |
API 2218 : 2013 | FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.