API 5L REDLINE : 2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SPECIFICATION FOR LINE PIPE
23-07-2013
01-01-2007
API Foreword
Foreword
Introduction
1 Scope
2 Conformity
3 Normative references
4 Terms and definitions
5 Symbols and abbreviated terms
6 Pipe grade, steel name and delivery condition
7 Information to be supplied by the purchaser
8 Manufacturing
9 Acceptance criteria
10 Inspection
11 Marking
12 Coatings and thread protectors
13 Retention of records
14 Pipe loading
Annex A (normative) - Specification for welded
jointers
Annex B (normative) - Manufacturing procedure
qualification for PSL 2 pipe
Annex C (normative) - Treatment of surface
imperfections and defects
Annex D (normative) - Repair welding procedure
Annex E (normative) - Non-destructive inspection
for other than sour service or offshore
service
Annex F (normative) - Requirements for couplings
(PSL 1 only)
Annex G (normative) - PSL 2 pipe with resistance to
ductile fracture propagation
Annex H (normative) - PSL 2 pipe ordered for sour
service
Annex I (normative) - Pipe ordered as "Through the
Flowline" (TFL) pipe
Annex J (normative) - PSL 2 pipe ordered for offshore
service
Annex K (normative) - Non-destructive inspection for
pipe ordered for sour service and/or offshore
service
Annex L (informative) - Steel designations
Annex M (informative) - Correspondence of terminology
between ISO 3183 and its source documents
Annex N (normative) - Identification/explanation of
deviations
Annex O (informative) - API Monogram
Annex P (Informative) - Equations from API TR
5C3/ISO TR 10400
Bibliography
Describes requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.
| DocumentType |
Redline
|
| PublisherName |
American Petroleum Institute
|
| Status |
Withdrawn
|
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| ASTM A 435/A435M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| API 5CT : 2012 | CASING AND TUBING |
| ISO 8491:1998 | Metallic materials Tube (in full section) Bend test |
| API 5L3 : 2014 | DROP-WEIGHT TEAR TESTS ON LINE PIPE |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| ISO 12094:1994 | Welded steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes |
| ISO 4885:2017 | Ferrous materials Heat treatments Vocabulary |
| ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ASTM E 114 : 2015 : REDLINE | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ISO 9303:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections |
| ISO 9304:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Eddy current testing for the detection of imperfections |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| ISO 11496:1993 | Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections |
| ASTM E 110 : 2014 : REDLINE | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 9598:1989 | Seamless steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 9402:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
| ISO 13664:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
| ISO 7539-2:1989 | Corrosion of metals and alloys Stress corrosion testing Part 2: Preparation and use of bent-beam specimens |
| ISO 13678:2010 | Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
| ISO 10543:1993 | Seamless and hot-stretch-reduced welded steel tubes for pressure purposes Full peripheral ultrasonic thickness testing |
| ASTM E 587 : 2015 : REDLINE | Standard Practice for Ultrasonic Angle-Beam Contact Testing |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 6761:1981 | Steel tubes Preparation of ends of tubes and fittings for welding |
| ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| ISO 11699-1:2008 | Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| API 5A3 : 2011 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
| ISO 12135:2016 | Metallic materials Unified method of test for the determination of quasistatic fracture toughness |
| ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
| ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| ISO 3183-1:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
| ISO 9764:1989 | Electric resistance and induction welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal imperfections |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| ISO 9765:1990 | Submerged arc-welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 12096:1996 | Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections |
| ISO 10124:1994 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections |
| ISO 13663:1995 | Welded steel tubes for pressure purposes Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| ISO 12095:1994 | Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| ISO 9305:1989 | Seamless steel tubes for pressure purposes Full peripheral ultrasonic testing for the detection of transverse imperfections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.