API RP 16Q : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
17-02-2023
Superseded by
Published date
01-04-2017
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative References
3 Terms, Definitions, and Abbreviations
4 Component Function and Selection
5 Riser Response Analysis
6 Riser Operations
7 Riser Integrity
8 Special Situations
Annex A (informative) - Riser Management System (QA/QC)
Annex B (informative) - Typical Riser Analysis Datasheet
Annex C (informative) - Fatigue
Annex D (informative) - Load and Resistance Factor Design
Bibliography
Gives requirements for the design, selection, operation, and maintenance of typical marine riser systems for floating drilling operations from a mobile offshore drilling unit (MODU) with a subsea blowout preventer (BOP) stack.
| DevelopmentNote |
Supersedes API 2Q and API 2K. (03/2004) Also available in Russian edition, see API 16Q RUSSIAN. (01/2018) New child ADD 1 2023 is added New child ADD 2 2024 is added.
|
| DocumentType |
Standard
|
| Pages |
122
|
| ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria New child ADD 1 2023 is added New child ADD 2 2024 is added.
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 04/19985215 DC : DRAFT DEC 2004 | BS ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| CSA ISO 19904-1 : 2007 : R2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| API 53 RUSSIAN : 1997 : R2004 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| ABS 0280 : 2017 | GUIDANCE NOTES ON DRILLING RISER ANALYSIS |
| UNI EN ISO 13624-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: DESIGN AND OPERATION OF MARINE DRILLING RISER EQUIPMENT |
| S.R. CEN ISO/TR 13624-2:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: DEEPWATER DRILLING RISER METHODOLOGIES, OPERATIONS, AND INTEGRITY TECHNICAL REPORT (ISO/TR 13624-2:2009) |
| BS EN ISO 13628-1 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| CEN ISO/TR 13624-2:2013 | Petroleum and natural gas industries - Drilling and production equipment - Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report (ISO/TR 13624-2:2009) |
| API SPEC 17D:2021+ADD 1:2022 | Specification for Subsea Wellhead and Tree Equipment |
| API 59 : 2006 : R2012 | RECOMMENDED PRACTICE FOR WELL CONTROL OPERATIONS |
| 11/30242939 DC : DRAFT MAR 2011 | BS EN ISO 19901-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 7: STATION KEEPING SYSTEMS FOR FLOATING OFFSHORE STRUCTURES AND MOBILE OFFSHORE UNITS |
| API 2FPS : 2011 | PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
| I.S. EN ISO 13624-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: DESIGN AND OPERATION OF MARINE DRILLING RISER EQUIPMENT |
| I.S. EN ISO 19904-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| 03/314812 DC : DRAFT SEP 2003 | ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| CSA ISO 19904-1 : 2007 : R2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| I.S. EN ISO 13628-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| BS EN ISO 13624-1:2009 | Petroleum and natural gas industries. Drilling and production equipment Design and operation of marine drilling riser equipment |
| BS PD ISO/TR 13624-2 : 2009 COR 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: DEEPWATER DRILLING RISER METHODOLOGIES, OPERATIONS, AND INTEGRITY TECHNICAL REPORT |
| API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API 2SK : 2005 : INC : ADD 1 : 2008 : R2015 | DESIGN AND ANALYSIS OF STATIONKEEPING SYSTEMS FOR FLOATING STRUCTURES |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| API 59 RUSSIAN : 2006 | RECOMMENDED PRACTICE FOR WELL CONTROL OPERATIONS |
| UNI EN ISO 13628-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| UNI EN ISO 19901-7 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 7: STATIONKEEPING SYSTEMS FOR FLOATING OFFSHORE STRUCTURES AND MOBILE OFFSHORE UNITS |
| API 96 : 2013 | DEEPWATER WELL DESIGN AND CONSTRUCTION |
| API 16R : 1997 : R2010 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| ISO 19904-1:2006 | Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
| API 16R RUSSIAN : 2010 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| PD CEN ISO/TR 13624-2:2013 | Petroleum and natural gas industries. Drilling and production equipment Deepwater drilling riser methodologies, operations, and integrity technical report |
| API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| BS EN ISO 19901-7:2013 | Petroleum and natural gas industries. Specific requirements for offshore structures Stationkeeping systems for floating offshore structures and mobile offshore units |
| ISO 13625:2002 | Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
| BS EN ISO 19904-1:2006 | Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
| EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
| EN ISO 19901-7:2013 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2013) |
| EN ISO 19904-1:2006 | Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
| EN ISO 13624-1:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment (ISO 13624-1:2009) |
| EN ISO 13625:2002 | Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
| ABS 0243 : 2017 | GUIDANCE NOTES ON SUBSEA HYBRID RISER SYSTEMS |
| ISO/TR 13624-2:2009 | Petroleum and natural gas industries Drilling and production equipment Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report |
| 17/30291980 DC : 0 | BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES |
| API Std 53 RUSSIAN:1997 | RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| BS ISO 19904-1 : 2006 AMD 16927 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| 07/30167130 DC : 0 | BS ISO 13624-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: DESIGN AND OPERATION OF MARINE DRILLING RISER EQUIPMENT |
| CSA ISO 19904-1 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API RP 59 : 2006 | RECOMMENDED PRACTICE FOR WELL CONTROL OPERATIONS |
| API RP 2SK : 2005 | DESIGN AND ANALYSIS OF STATIONKEEPING SYSTEMS FOR FLOATING STRUCTURES |
| API 16R:1997 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| CSA ISO 19901.7 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 7: STATIONKEEPING SYSTEMS FOR FLOATING OFFSHORE STRUCTURES AND MOBILE OFFSHORE UNITS |
| ISO 19901-7:2013 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
| ISO 13624-1:2009 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Design and operation of marine drilling riser equipment |
| BS EN ISO 13625:2002 | Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings |
| API RP 59:2006(R2023) | Recommended Practice for Well Control Operations |
| API 16J : 1992 | COMPARISON OF MARINE DRILLING RISER ANALYSES |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| ASME PTC25 : 2014 | PRESSURE RELIEF DEVICES |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| API 5L : 2012 | LINE PIPE |
| API 2R : 1ED 84 | RECOMMENDED PRACTICE FOR DESIGN, RATING AND TESTING OF MARINE DRILLING RISER COUPLINGS |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| API 9B : 2015 | APPLICATION, CARE, AND USE OF WIRE ROPE FOR OIL FIELD SERVICE |
| API 5C3 : 1994 | BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES |
| ISO/TR 10400:2007 | Petroleum and natural gas industries Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
| ISO/TR 13624-2:2009 | Petroleum and natural gas industries Drilling and production equipment Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| API 53 : 2012 | BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.