AS 1085.1-2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway track material Steel rails (Reconfirmed 2013)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-03-2023
01-08-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies performance requirements for as-rolled and head-hardened steel rail, covering track compatibility, service life, material integrity, connection, maintenance and handling. Asymmetric switch rails and elevated guardrails are also covered. Appendices five deemed to comply solutions for profiles, tolerances, chemical composition, mechanical properties and specify test methods for inclusions and surface finish. Guidance to purchasers, information on compliance and on residual stresses in rail is also given in appendices.
| Committee |
CE-002
|
| DocumentType |
Standard
|
| ISBN |
0 7337 4619 5
|
| Pages |
37
|
| ProductNote | |
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for as-rolled and hardened steel rails made from continuously cast blooms and profiles for asymmetric switch rails and elevated guardrails for railway purposes.NOTES: 1 Guidelines for purchasers are given in Appendix A.2 Guidance on the means for demonstrating compliance with this Standard is given in Appendix B.3 Information on residual stresses in rail is given in Appendix C.
Originated as AS E1-1925T and AS 1085.11-1985.
Previous edition AS 1085.1-2000.
Sixth edition 2002.
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS/NZS 1050.20:1994 | Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS/NZS 1050.2:1994 | Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 1050.1:1996 | Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis |
| AS/NZS 1050.16:1994 | Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017) |
| AS 1391-1991 | Methods for tensile testing of metals |
| AS/NZS 1050.31:1994 | Methods for the analysis of iron and steel Determination of niobium content - PAR spectrophotometric method (Reconfirmed 2016) |
| AS/NZS 1050.21:1994 | Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016) |
| AS/NZS 1050.39:1994 | Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
| AS/NZS 1050.26:1994 | Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016) |
| AS 2205.5.1-2003 | Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination (Reconfirmed 2018) |
| AS 1817-1991 | Metallic materials - Vickers hardness test |
| AS/NZS 1050.32:1994 | Methods for the analysis of iron and steel Determination of carbon content - Infrared method (Reconfirmed 2017) |
| AS/NZS 1050.18:1994 | Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016) |
| AS/NZS 1050.38:1994 | Methods for the analysis of iron and steel Determination of vanadium content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS 1816-1990 | Metallic materials - Brinell hardness test |
| AS/NZS 1050.24:1994 | Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016) |
| AS/NZS 1050.28:1994 | Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016) |
| AS/NZS 1050.30:1994 | Methods for the analysis of iron and steel Determination of boron content - Curcumin spectrophotometric method |
| AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
| AS/NZS 1050.14:1994 | Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method |
| AS 1100.201-1992 | Technical drawing Mechanical engineering drawing (Reconfirmed 2014) |
| AS 1929-1981 | Non-destructive testing - Glossary of terms |
| AS/NZS 1050.27:1994 | Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016) |
| AS/NZS 1050.8:1994 | Methods for the analysis of iron and steel Determination of manganese content - Spectrophotometric method (Reconfirmed 2016) |
| AS/NZS 1050.6:1995 | Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
| AS/NZS 1050.37:1994 | Methods for the analysis of iron and steel Determination of copper content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
| AS 2205.5.1-1997 | Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination |
| AS 1003-1971 | Engineers' straightedges (metric units) |
| AS 1085.14-2012 | Railway track material Prestressed concrete sleepers |
| AS 1085.10-2002 | Railway track material Rail anchors |
| AS 1085.20-2006 | Railway track material - Part 20: Welding of steel rail |
| AS 1085.20-2012 | Railway track material Welding of steel rail |
| AS 1418.1-2002 | Cranes, hoists and winches General requirements |
| AS 1085.2-2002 | Railway track material Fishplates |
| AS 1085.3-2002 | Railway track material Sleeper plates (Reconfirmed 2013) |
| AS 4292.2-2006 | Railway safety management Track, civil and electrical infrastructure |
| AS 1085.4-2002 | Railway track material Fishbolts and nuts (Reconfirmed 2013) |
| AS 1085.15-1995 | Railway permanent way material Aluminothermic rail welding |
| AS 1085.8-2002 | Railway track material Dogspikes (Reconfirmed 2013) |
| AS 1085.12-2002 | Railway track material Insulated joint assemblies (Reconfirmed 2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.