AS 1152-1993
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Specification for test sieves
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
01-01-1993
Specifies requirements and sets out recommendations for test sieves made from woven wire or perforated plate in the aperture size range 32 µm to 125 mm.
Committee |
CH-032
|
DocumentType |
Standard
|
ISBN |
0 7262 7939 0
|
Pages |
20
|
ProductNote |
Withdrawn 30-01-2017.
|
PublisherName |
Standards Australia
|
Status |
Withdrawn
|
Supersedes |
This Standard specifies the requirements for test sieves made from woven wire cloth or from plates with square or round perforations for use in determining the size distribution of granular products in the particle size range32 mm to 125 mm.The aperture sizes and tolerances of this Standard apply to new test sieves.For wire cloth test sieves, successive sizes of which are in a ratio of about 1:2, the R40/3 series of aperture sizes is proposed. For perforated plate test sieves, both the R40/3 and the R20 series are proposed, particularly to meet the requirements of the aggregate, coal and iron industries.NOTES:1 Appendix A provides guidance on information to be supplied by purchasers when ordering test sieves.2 Appendix B describes the procedure for inspecting woven wire test sieves.3 Appendix C describes the procedure for inspecting perforated plate test sieves.4 Appendix D describes the procedure for calibrating woven wire cloth or perforated plate test sieves.5 Appendix E gives information on the maintenance of test sieves.
First published as AS 1152-1973.
Second edition 1993.
AS 1289.5.3.2-2004 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer (Reconfirmed 2016) |
AS 4133.3.4-1993 | Methods of testing rocks for engineering purposes Rock swelling and slake durability tests - Determination of the slake durability index of rock samples |
AS 2341.28-2002 | Methods of testing bitumen and related roadmaking products Determination of stone coating ability and water resistance |
AS 1774.6-1992 | Refractories and refractory materials - Physical test methods Determination of true density |
AS/NZS 3750.15:1998 | Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013) |
AS 2300.1.3-1988 | Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of fat - Gravimetric method |
AS 2724.5-1987 | Ambient air - Particulate matter - Part 5: Determination of impinged matter expressed as directional dirtiness, background dirtiness and/or area dirtiness (directional dust gauge method) |
AS 1289.5.2.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compactive effort |
AS 1038.10-1980 | Coal and coke - Analysis and testing - Arsenic in coal and coke |
AS 2884.2-2003 | Heavy mineral sand concentrates - Sampling - Sampling from stationary situations |
AS 2434.6-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Ultimate analysis - Classical methods (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1141.41-1999 | Methods for sampling and testing aggregates Polished aggregate friction value - Horizontal bed machine |
AS 4350.1-2005 | Heavy mineral sand concentrates - Physical testing - Size analysis |
AS 1141.25.1-1996 | Methods for sampling and testing aggregates Degradation factor - Source rock |
AS 2239-1993 | Galvanic (sacrificial) anodes for cathodic protection |
AS 2150-2005 | Hot mix asphalt - A guide to good practice |
AS 1049-1996 | Telecommunication cables - Insulation, sheath and jacket |
AS 1141.71-1998 | Methods for sampling and testing aggregates Lime or cement content of stabilized pavement materials (EDTA method) |
AS 1478.1-2000 | Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
AS 5101.5-2008 | Methods for preparation and testing of stabilized materials Absorption, swell and capillary rise of compacted materials |
AS 2300.1.3-2008 | Methods of chemical and physical testing for the dairying industry General methods and principles - Determination of fat - Gravimetric method (Reconfirmed 2019) |
AS 3586.3-1994 | Ferroalloys - Sampling - Preparation of samples |
AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
AS 2856.1-2000 | Coal petrography Preparation of coal samples for incident light microscopy (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1012.8.2-2000 | Methods of testing concrete Method for making and curing concrete - Flexure test specimens |
AS/NZS 1337.1:2010 | Personal eye protection Eye and face protectors for occupational applications |
AS 4433.1-1997 | Guide to the sampling of particulate materials - Sampling procedures |
AS 1141.30-1996 | Methods for sampling and testing of aggregates Coarse aggregate quality by visual comparison |
AS/NZS 2009:2002 | Glass beads for pavement-marking materials |
AS 4283-1995 | Cold mix asphalt for maintenance patching |
AS/NZS 4257.5:1994 | Plastic roof and wall cladding materials - Methods of test Determination of glass fibre content (Reconfirmed 2020) |
AS 3870-1991 | Certified reference materials - General guide to material selection, preparation, testing and certification |
AS 2884.2-1993 | Heavy mineral sand concentrates - Sampling - Sampling from stationary situations |
AS/NZS 3580.10.1:2016 | Methods for sampling and analysis of ambient air Determination of particulate matter - Deposited matter - Gravimetric method |
AS 2239-2003 | Galvanic (sacrificial) anodes for cathodic protection |
AS 1289.3.6.3-1994 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer |
AS 4045.2-1995 | Prepared unshaped refractory materials - Insulating |
AS 4264.3-1996 | Coal and coke - Sampling Lower rank coal - Sampling procedures |
AS 2891.3.1-1991 | Methods of sampling and testing asphalt Bitumen content and aggregate grading - Reflux method |
AS 1741-1991 | Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018) |
AS 2105-1992 | Inorganic zinc silicate paint |
AS 1141.5-2000 | Method for sampling and testing aggregates Particle density and water absorption of fine aggregate (Reconfirmed 2016) |
AS 5142:2016 | Dewatering characteristics of coarse coal in a vibrating centrifuge |
AS 4433.2-1997 | Guide to the sampling of particulate materials - Preparation of samples |
AS 1141.28-1999 | Methods for sampling and testing aggregates Ball mill value |
AS 1038.25-2002 | Coal and coke - Analysis and testing Coal - Durham cone handleability test (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1478-1992 | Chemical admixtures for concrete |
AS 1038.16-2005 | Coal and coke - Analysis and testing Assessment and reporting of results (Reconfirmed 2016) |
AS/NZS 2009:2006 | Glass beads for pavement-marking materials (Reconfirmed 2016) |
AS 4538.1-1999 | Guide to the sampling of alumina Sampling procedures (Reconfirmed 2013) |
AS 1141.52-2008 | Methods for sampling and testing aggregates Unconfined cohesion of compacted pavement materials |
AS 4156.3-1994 | Coal preparation Magnetite for coal preparation plant use - Test methods |
AS 3586.4-1995 | Ferroalloys - Sampling - Determination of quality variation, precision and bias |
AS 2341.20-1992 | Determination of sieve residue for tar |
AS 1289.3.8.2-1997 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of the percent dispersion of a soil |
AS 4049.2-1994 | Paints and related materials - Road marking materials - Thermoplastic road marking materials |
AS 1289.3.8.1-2006 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of Emerson class number of a soil |
AS 1774.19-2003 | Refractories and refractory materials - Physical test methods The determination of sieve analysis and moisture content (Reconfirmed 2013) |
AS 1141.36:2017 | Methods for sampling and testing aggregates Sulfur in metallurgical slag, crushed rock or other pavement materials |
AS 4479.1-1997 | Analysis of soil Pretreatment of potentially contaminated soil samples for heavy metal and metalloid analysis |
AS 1289.3.7.1-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the sand equivalent of a soil using a power-operated shaker |
AS 1774.10-2002 | Refractories and refractory materials - Physical test methods Pyrometric cone equivalent (refractoriness) (Reconfirmed 2013) |
AS 2001.6.1-1980 | Methods of test for textiles Miscellaneous tests - Determination of the resistance of textiles to certain insect pests |
AS 1141.25.2-2003 | Methods for sampling and testing aggregates Degradation factor - Coarse aggregate (Reconfirmed 2014) |
AS 2246-1996 | Conical flasks and boiling flasks (narrow necked) |
AS 2341.28-1996 | Methods of testing bitumen and related roadmaking products Determination of stone coating ability and water resistance |
AS 1289.6.1.3-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method |
AS 2300.1.1-2008 | Methods of chemical and physical testing for the dairying industry General methods and principles - Determination of total solids and moisture |
AS/NZS 3580.10.1:2003 | Methods for sampling and analysis of ambient air Determination of particulate matter - Deposited matter - Gravimetric method (Reconfirmed 2014) |
AS 3706.7-2014 | Geotextiles - Methods of test Determination of pore-size distribution - Dry-sieving method |
AS/NZS 2341.26:1996 | Methods of testing bitumen and related roadmaking products Determination of sieve residue |
AS 2891.11-1991 | Methods of sampling and testing asphalt Degree of particle coating |
AS 4133.0-1993 | Methods of testing rocks for engineering purposes General requirements and list of methods |
AS/NZS 2341.26:2002 | Methods of testing bitumen and related roadmaking products Determination of sieve residue |
AS 5101.4-2008 | Methods for preparation and testing of stabilized materials Unconfined compressive strength of compacted materials |
AS 1141.2-1999 | Methods for sampling and testing aggregates Basic testing equipment |
AS 1141.23-2009 | Methods for sampling and testing aggregates Los Angeles value |
AS 3881-2002 | Higher rank coal - Size analysis |
AS 1289.5.7.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method) |
AS 2891.4-1991 | Methods of sampling and testing asphalt Tar content and aggregate grading |
AS 1289.6.8.1-1995 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the resilient modulus and permanent deformation of granular unbound pavement materials |
AS/NZS 2891.3.2:1997 | Methods of sampling and testing asphalt Bitumen content and aggregate grading - Centrifugal extraction method |
AS 1141.15-1999 | Methods for sampling and testing aggregates Flakiness index (Reconfirmed 2018) |
AS/NZS 2341.20:2016 | Methods of testing bitumen and related roadmaking products Determination of sieve residue for bituminous materials |
AS 1580.504.1-1993 | Paints and related materials - Methods of test Metallic zinc content |
AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
AS 1012.20.2:2016 | Methods of testing concrete Determination of water-soluble chloride in aggregates and hardened concrete |
AS 1141.41:2017 | Methods for sampling and testing aggregates Polished aggregate friction value - Horizontal bed machine |
AS 1141.22-2008 | Methods for sampling and testing aggregates Wet/dry strength variation |
AS 2503.2-2006 | Refractories and refractory materials - Chemical analysis Aluminosilicate refractories |
AS 3674-1989 | Storage of microfilm |
AS 1289.3.9-1991 | |
AS 2300.10.1-1991 | Methods of chemical and physical testing for the dairying industry Caseins, caseinates and coprecipitates - General information and preparation of samples |
AS 1141.27-1995 | Methods for sampling and testing aggregates Resistance to wear by attrition |
AS 1289.5.3.5-1997 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013) |
AS 2434.1-1999 | Methods for the analysis and testing of lower rank coal and its chars Determination of the total moisture content of lower rank coal (Reconfirmed 2013) (Reconfirmed 2023) |
AS 4133.0-2005 | Methods of testing rocks for engineering purposes General requirements and list of methods |
AS 1141.51-1996 | Methods for sampling and testing aggregates Unconfined compressive strength of compacted materials |
AS 1141.53-1996 | Methods for sampling and testing aggregates Absorption, swell and capillary rise of compacted materials |
AS 1141.70-1996 | Methods for sampling and testing aggregates Lime or cement content of uncured stabilized pavement materials (EDTA method) |
AS/NZS 2891.11:2014 | Methods of sampling and testing asphalt Degree of particle coating |
AS 1012.20.1:2016 | Methods of testing concrete Determination of chloride and sulfate in hardened concrete and aggregates - Nitric acid extraction method |
AS 2884.4-1997 | Heavy mineral sand concentrates - Sampling - Determination of precision and bias |
AS 1141.11.2-2008 | Methods for sampling and testing aggregates Particle size distribution for vision sizing systems |
AS 1141.36-1997 | Methods for sampling and testing aggregates Sulfur in metallurgical slag, crushed rock or other pavement materials |
AS 1289.3.6.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving |
AS 1141.18-1996 | Methods for sampling and testing aggregates Crushed particles in coarse aggregate derived from gravel |
AS 2341.29-1996 | Methods of testing bitumen and related roadmaking products Determination of breaking behaviour by setting time (Reconfirmed 2013) |
AS 2434.3-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Determination of the moisture holding capacity (Reconfirmed 2013) (Reconfirmed 2023) |
AS 4433.3-2002 | Guide to the sampling of particulate materials - Estimating sampling precision |
AS 3881-1991 | Higher rank coal - Size analysis |
AS 2891.11-2005 | Methods of sampling and testing asphalt Degree of particle coating |
AS 1141.16-2007 | Methods for sampling and testing aggregates Angularity number (Reconfirmed 2016) |
AS 1289.3.7.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the sand equivalent of a soil using a power-operated shaker |
AS 1289.3.6.2-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method) |
AS 2806.1-2003 | Aluminium ores - Sampling Sampling procedures |
AS 2300.1.5-1988 | Methods of chemical and physical testing for the dairying industry General methods and principles - Determination of ash |
AS 1774.6-2001 | Refractories and refractory materials - Physical test methods Determination of true density |
AS 2341.25-2002 | Methods of testing bitumen and related roadmaking products Determination of consistency (Reconfirmed 2022) |
AS 1038.12.4.2-1996 | Coal and coke - Analysis and testing Higher rank coal - Caking and coking properties - Plasticity - Discontinuous-torque Gieseler method |
AS 3895.1-1991 | Methods for the analysis of copper, lead, zinc, gold and silver ores Determination of gold (Fire assay - Flame AAS method) |
AS 1141.40:2017 | Methods for sampling and testing aggregates Polished aggregate friction value - Vertical road-wheel machine |
AS/NZS 2341.20:1998 | Methods of testing bitumen and related roadmarking products - Determination of sieve residue for bituminous materials |
AS 1141.40-1999 | Methods for sampling and testing aggregates Polished aggregate friction value - Vertical road-wheel machine |
AS 1289.4.2.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method |
AS 1289.5.2.1-2003 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density or moisture content relation of a soil using modified compactive effort |
AS 4439.3-1997 | Wastes, sediments and contaminated soils Preparation of leachates - Bottle leaching procedures |
AS 1141.12-1996 | Methods for sampling and testing of aggregates Materials finer than 75 micrometre in aggregates (by washing) |
AS/NZS 3750.9:2009 | Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019) |
AS 5101.3.2-2008 | Methods for preparation and testing of stabilized materials Lime or cement content of stabilized pavement materials (EDTA method) |
AS 4350.1-1995 | Heavy mineral sand concentrates - Physical testing - Size analysis |
AS 1289.6.7.3-1999 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method using a flexible wall permeameter |
AS 1141.19-1998 | Methods for sampling and testing aggregates Fine particle size distribution in road materials by sieving and decantation (Reconfirmed 2014) |
AS 3580.10.1-1991 | Methods for sampling and analysis of ambient air Determination of particulates - Deposited matter - Gravimetric method |
AS 1289.6.7.1-1999 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen |
AS 1141.32-2008 | Methods for sampling and testing aggregates Weak particles (including clay lumps, soft and friable particles) in coarse aggregates |
AS/NZS 2891.3.1:1997 | Methods of sampling and testing asphalt Bitumen content and aggregate grading - Reflux method |
AS 1141.23-1995 | Methods for sampling and testing aggregates Los Angeles value |
AS 1141.24-1997 | Methods for sampling and testing aggregates Aggregate soundness - Evaluation by exposure to sodium sulfate solution |
AS 4045.2-2006 | Prepared unshaped refractory materials Insulating |
AS 1289.5.1.1-2003 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort |
AS 2503.2-1996 | Refractories and refractory materials - Chemical analysis - Aluminosilicate refractories |
AS/NZS 3162:1995 | Approval and test specification - Electric kitchen machines for household use |
AS 1038.16-1996 | Coal and coke - Analysis and testing - Assessment and reporting of results |
AS 1289.1-1991 | Methods of testing soils for engineering purposes Preparation of disturbed soil samples for testing |
AS 3638-1993 | Test sieving procedures |
AS 4489.3.1-1997 | Methods of tests for limes and limestones Slaking - Dewar flask |
AS 1141.32-1995 | Methods for sampling and testing aggregates Weak particles (including clay lumps, soft and friable particles) in coarse aggregates |
AS 5101.2.2-2008 | Methods for preparation and testing of stabilized materials Sampling - Preparation of stabilized pavement materials |
AS 1038.15-1995 | Coal and coke - Analysis and testing Higher rank coal ash and coke ash - Ash fusibility |
AS 2806.3-2001 | Aluminium ores - Sampling Preparation of samples |
AS 1038.18-1996 | Coal and coke - Analysis and testing Coke - Size analysis |
AS 4049.2-2005 | Paints and related materials - Pavement marking materials Thermoplastic pavement marking materials - For use with surface applied glass beads |
AS 1683.21-1982 | Methods of test for rubber Rubber vulcanized - Determination of abrasion resistance using a rotating cylindrical device (Reconfirmed 2018) |
AS 1141.29-1999 | Methods for sampling and testing aggregates Accelerated soundness index by reflux |
AS 4045.1-1993 | Prepared unshaped refractory materials - Dense |
AS 1647.3-1995 | Children’s toys (safety requirements) Toxicological requirements |
AS 1774.28-2007 | Refractories and refractory materials - Physical test methods Ceramic fibre products - Test methods |
AS 2432-1991 | Babies' dummies |
AS 2150-1995 | Hot mix asphalt |
AS 1289.3.6.3-2003 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer |
AS 1038.9-1977 | Methods for the analysis and testing of coal and coke Phosphorus in coal and coke |
AS 2701-2001 | Methods of sampling and testing mortar for masonry construction (Reconfirmed 2015) |
AS 1141.25.1-2003 | Methods for sampling and testing aggregates Degradation factor - Source rock (Reconfirmed 2014) |
AS 3583.1-1998 | Methods of test for supplementary cementitious materials for use with portland and blended cement Determination of fineness by the 45 micrometre sieve (Reconfirmed 2016) |
AS 1289.3.8.3-1997 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil |
AS 1141.31-1997 | Methods for sampling and testing aggregates Light particles |
AS 1289.1.1-2001 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Preparation of disturbed soil samples for testing |
AS 1038.6.3.3-1986 | Coal and coke - Analysis and testing Ultimate analysis of higher rank coal - Determination of total sulphur (Infrared method) |
AS 1141.6.2-1996 | Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Pycnometer method (Reconfirmed 2016) |
AS 1038.12.3-2002 | Coal and coke - Analysis and testing Higher rank coal - Caking and coking properties - Dilatation |
AS 2434.9-1991 | Methods for the analysis and testing of lower rank coal and its chars Determination of four acid-extractable inorganic ions in lower rank coal |
AS 1289.0-2000 | Methods of testing soils for engineering purposes General requirements and list of methods |
AS 2592-1983 | Gypsum plaster for building purposes |
AS 1289.5.3.1-2004 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus (Reconfirmed 2016) |
AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS 1289.3.6.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving (Reconfirmed 2022) |
AS 1580.504.1-2005 | |
AS 2806.1-1994 | Aluminium ores - Sampling - Sampling procedures |
AS 2891.3.2-1991 | Methods of sampling and testing asphalt Bitumen content and aggregate grading - Centrifugal extraction method |
AS 1012.8.1-2000 | Methods of testing concrete Method for making and curing concrete - Compression and indirect tensile test specimens |
AS 2093-1977 | Salt for use in the manufacture of dairy products |
AS 1141.22-1996 | Methods for sampling and testing aggregates Wet/dry strength variation |
AS 2300.1.1-1988 | Methods of chemical and physical testing for the dairying industry General methods and principles - Determination of total solids and moisture |
AS 1038.8-1980 | Coal and coke - Analysis and testing Chlorine in coal and coke |
AS 1141.16-1995 | Methods for sampling and testing aggregates Angularity number |
AS 1289.3.8.1-1997 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of Emerson class number of a soil |
AS 1289.3.5.1-2006 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of a soil - Standard method |
AS 4264.1-1995 | Coal and coke - Sampling Higher rank coal - Sampling procedures |
AS 1289.3.9.1-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of a soil |
AS 3880-1991 | Bin flow properties of coal |
AS 1038.12.3-1993 | Coal and coke - Analysis and testing Higher rank coal - Caking and coking properties - Dilatation |
AS 2236-1994 | Electrical equipment for explosive atmospheres - Dust-excluding ignition-proof (DIP) enclosure |
AS 2300.1.2.1-1991 | Methods of chemical and physical testing for the dairying industry General methods and principles - Determination of nitrogen - Reference Kjeldahl method (Reconfirmed 2019) |
AS 4049.1-1992 | Paints and related materials - Road marking materials Solvent-borne paint - For use with drop-on beads |
AS 2350.9-1997 | Methods of testing portland and blended cements - Determination of residue on the 45 micrometre sieve |
AS 4264.2-1996 | Coal and coke - Sampling Coke - Sampling procedures (Reconfirmed 2013) |
AS 1038.5-1998 | Coal and coke - Analysis and testing - Gross calorific value |
AS 1289.6.1.1-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen |
AS 1038.20-1992 | Coal and coke - Analysis and testing Higher rank coal - Hardgrove grindability index |
AS/NZS 3580.10.2:2013 | Methods for sampling and analysis of ambient air Determination of particulate matter - Impinged matter - Gravimetric method (Reconfirmed 2024) |
AS 1774.10-1994 | Refractories and refractory materials - Physical test methods Pyrometric cone equivalent (refractoriness) |
AS 4133.3.4-2005 | Methods of testing rocks for engineering purposes Rock swelling and slake durability tests - Determination of the slake durability index of rock samples |
AS/NZS 2596:2003 | Seat belt assemblies for motor vehicles (ECE Regulation No. 16, MOD) |
AS 4156.3-2008 | Coal preparation Magnetite for coal preparation plant use - Test methods (Reconfirmed 2020) |
AS 1141.6.1-1995 | Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Weighing-in-water method |
AS 1038.18-2006 | Coal and coke - Analysis and testing Coke - Size analysis (Reconfirmed 2016) |
AS 4264.4-1996 | Coal and coke - Sampling - Determination of precision and bias |
AS 2503.1-2006 | Refractories and refractory materials - Chemical analysis Silica refractories |
AS 1141.11-1996 | Methods for sampling and testing aggregates Particle size distribution by sieving |
AS 1141.20.1-2000 | Methods for sampling and testing aggregates Average least dimension - Direct measurement (nominal size 10 mm and greater) (Reconfirmed 2014) |
AS 3586.1-1994 | Ferroalloys - Sampling Particulate alloys |
AS 3648-1993 | Specification and methods of test for packaged concrete mixes |
AS 2884.3-2003 | Heavy mineral sand concentrates - Sampling Preparation of samples |
AS 1049-2003 | Telecommunication cables - Insulation, sheath and jacket |
AS 4433.5-2005 | Guide to the sampling of particulate materials - Sampling of slurries |
AS 1141.25.2-1999 | Methods for sampling and testing aggregates Degradation factor - Coarse aggregate |
AS 3988-1991 | Copper, lead, zinc, gold and silver ores - Guide to sample preparation for the determination of gold (Reconfirmed 2016) |
AS 2300.10.5-1991 | Methods of chemical and physical testing for the dairying industry Caseins, caseinates and coprecipitates - Determination of particle-size distribution in caseins (Reconfirmed 2016) |
AS 1141.3.3-1999 | Methods for sampling and testing aggregates Sampling - Preparation of stabilized pavement materials |
AS 2891.3.3-1991 | Methods of sampling and testing asphalt Bitumen content and aggregate grading - Pressure filter method |
AS 1141.15-1995 | Methods for sampling and testing aggregates Flakiness index |
AS 1289.5.3.2-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer |
AS/NZS 1337:1992 | Eye protectors for industrial applications |
AS 2434.7-2002 | Methods for the analysis and testing of lower rank coal and its chars Lower rank coal - Determination of moisture in the analysis sample (Reconfirmed 2013) (Reconfirmed 2023) |
AS 4078-1992 | Fire protection - Fire extinguishing media - Carbon dioxide (Reconfirmed 2018) |
AS 1289.5.7.1-2006 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method) |
AS/NZS 2596:1995 | Seat belt assemblies for motor vehicles |
AS 1141.30.1-2009 | Methods for sampling and testing aggregates Coarse aggregate quality by visual comparison |
AS 2884.1-1997 | Heavy mineral sand concentrates - Sampling - Moving streams |
AS 5101.3.1-2008 | Methods for preparation and testing of stabilized materials Lime or cement content of uncured stabilized pavement materials (EDTA method) (Reconfirmed 2017) |
AS 4045.1-2003 | Prepared unshaped refractory materials Dense (Reconfirmed 2013) |
AS/NZS 2891.3.3:2013 | Methods of sampling and testing asphalt Binder content and aggregate grading - Pressure filter method |
AS 1141.25.1-2000 | Methods for sampling and testing aggregates Degradation factor - Source rock |
AS 1038.6.3.1-1986 | Coal and coke - Analysis and testing Ultimate analysis of higher rank coal - Determination of total sulphur (Eschka method) |
AS 1289.3.5.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of a soil - Standard method |
AS 2503.1-1996 | Refractories and refractory materials - Chemical analysis - Silica refractories |
AS 1141.66-2012 | Methods for sampling and testing aggregates Methylene blue adsorption value of fine aggregate and mineral fillers |
AS 1141.25.3-2003 | Methods for sampling and testing aggregates Degradation factor - Fine aggregate (Reconfirmed 2014) |
AS 1019-2000 | Internal combustion engines - Spark emission control devices |
AS 1289.6.1.2-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen |
AS 4156.2.1-2004 | Coal preparation Higher rank coal - Froth flotation - Basic test |
AS 1038.12.4.1-1996 | Coal and coke - Analysis and testing Higher rank coal - Caking and coking properties - Plasticity - Continuous-torque Gieseler method |
AS 4489.2.1-1997 | Test methods for limes and limestones Fineness - Wet sieving (Reconfirmed 2016) |
AS 1289.5.1.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort |
AS 1038.13-1990 | Methods for the analysis and testing of coal and coke Tests specific to coke (Reconfirmed 2013) |
AS 4264.1-2009 | Coal and coke - Sampling Coal - Sampling procedures |
AS 2350.9-2006 | Methods of testing portland, blended and masonry cements Determination of residue on the 45 μm sieve |
AS 1038.20-2002 | Coal and coke - Analysis and testing Higher rank coal - Hardgrove grindability index (Reconfirmed 2013) |
AS 2418-1995 | Coal and coke - Glossary of terms (Reconfirmed 2013) (Reconfirmed 2023) |
AS/NZS 4049.3:1996 | Paints and related materials - Road marking materials - Waterborne paint - For use with drop-on beads |
AS 4049.1-2005 | Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS 1012.20-1992 | Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates |
AS 1038.7-1981 | Coal and coke - Analysis and testing - Ultimate analysis of coke |
AS 2300.9-1990 | |
AS/NZS 2891.3.3:1997 | Methods of sampling and testing asphalt Bitumen content and aggregate grading - Pressure filter method |
AS 1141.21-1997 | Methods for sampling and testing aggregates Aggregate crushing value (Reconfirmed 2016) |
AS 1289.4.1.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method |
AS 3135-1997 | Approval and test specification - Semi-enclosed fuses for a.c. circuits |
AS/NZS 2891.3.2:2013 | Methods of sampling and testing asphalt Binder content and aggregate grading - Centrifugal extraction method |
AS 1141.14-1995 | Methods for sampling and testing aggregates Particle shape, by proportional calliper |
AS/NZS 2891.3.1:2013 | Methods of sampling and testing asphalt Binder content and aggregate grading - Reflux method |
AS 1289.5.3.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus |
AS/NZS 1301.002s:2004 | Methods of test for pulp and paper Preparation of wood samples for chemical analysis (Reconfirmed 2017) |
AS 2341.25-1996 | Methods of testing bitumen and related roadmaking products Determination of consistency |
AS 1141.11.1-2009 | Methods for sampling and testing aggregates Particle size distribution - Sieving method |
AS 2434.9-2000 | Method for the analysis and testing of lower rank coal and its chars Determination of four acid-extractable inorganic ions in lower rank coal (Reconfirmed 2013) (Reconfirmed 2023) |
AS 3706.7-2003 | Geotextiles - Methods of Test Determination of pore-size distribution - Dry-sieving method |
AS 2396-1980 | Performance of household food waste disposal units |
AS 1141.14-2007 | Methods for sampling and testing aggregates Particle shape, by proportional caliper (Reconfirmed 2018) |
AS 2503.3-2006 | Refractories and refractory materials - Chemical analysis High alumina materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.