AS 1199.4-2003
Current
The latest, up-to-date edition.
Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
28-07-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies sampling plans and procedures that can be used to assess whether the quality level of an entity (lot, process, etc) conforms to a declared value. This Standard is identical with and reproduced from ISO2859-4:2002.
| Committee |
QR-008
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5436 8
|
| Pages |
12
|
| ProductNote |
Reconfirmed 22/07/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 22/07/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This part of ISO 2859 establishes sampling plans and procedures that can be used to assess whether the quality level of an entity (lot, process, etc) conforms to a declared value. The sampling plans have been devised so as to obtain a risk of less than 5% of contradicting a correct declared quality level. The risk is 10% of failing to contradict an incorrect declared quality level which is related to the limiting quality ratio (see clause 4). Sampling plans are provided corresponding to three levels of discriminatory ability.In contrast to the procedures in the other parts of ISO 2859, the procedures in this part of ISO 2859 are not applicable to acceptance assessment of lots. Generally, the balancing of the risks of reaching incorrect conclusions in assessment procedures will differ from the balancing in the procedures for acceptance sampling.This part of ISO 2859 may be used for various forms of quality inspection in situations where objective evidence of conformity to some declared quality level is to be provided by means of inspection of a sample. The procedures areapplicable to entities such as lots, process output, etc. that allow random samples of individual items to be taken from the entity.The sampling plans provided in this part of ISO 2859 are applicable, but not limited, to inspection of a variety of products such as— end items;— components and raw materials;— operations;— materials in process;— supplies in storage;— maintenance operations;— data or records;— administrative procedures.The procedures are primarily intended to be used when the quantity of interest is the number or fraction of nonconforming items for which the inspected items are classified as conforming or nonconforming.With minor changes, the procedures may also be used when the quantity of interest is the number of nonconformities or number of nonconformities per item. The necessary changes are:— replacement of “number of nonconforming items” by “number of nonconformities”;— replacement of “percent nonconforming items” by “nonconformities per 100 items”.In this case the values given in Tables 2 to 7 are only approximations.
| Standards | Relationship |
| ISO 2859-4:2002 | Identical |
First published as AS 1199.4-2003.
| AS 5100.5-2004 | Bridge design Concrete |
| AS ISO 10017-2006 | Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) |
| AS 2703-2008 | Vehicle loop detector sensors |
| AS/NZS 2009:2006 | Glass beads for pavement-marking materials (Reconfirmed 2016) |
| AS 4125.1-2009 | Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management |
| AS 4253:2019 | Mailboxes |
| AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
| AS/NZS 4798(INT):2005 | Polyethylene maintenance shafts |
| AS 3775.1-2004 | Chain slings - Grade T Product specification |
| AS/NZS 2728:2013 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
| AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
| AS/NZS 3518:2004 | Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS 2905-2005 | Steel drums |
| AS 4049.2-2005 | Paints and related materials - Pavement marking materials Thermoplastic pavement marking materials - For use with surface applied glass beads |
| AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
| AS 3600:2018 | Concrete structures |
| AS 2770-2005 | Measuring cylinders - Plastics - Graduated |
| AS 3600-2009 | Concrete structures |
| AS/NZS 4131:2010 | Polyethylene (PE) compounds for pressure pipes and fittings (Reconfirmed 2022) |
| AS 4371-2012 | Ceramic tableware |
| AS 4049.1-2005 | Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016) |
| AS 3818.1-2003 | Timber - Heavy structural products - Visually graded General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.