• Shopping Cart
    There are no items in your cart

AS 1300-1989

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Electrical equipment for coal mines - Bolted flame-proof cable coupling devices

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

29-07-2024

Superseded by

AS/NZS 1300:2009

Language(s)

English

Published date

01-01-1989

€32.89
Excluding VAT

1 - AS 1300-1989 ELECTRICAL EQUIPMENT FOR COAL MINES - BOLTED FLAMEPROOF CABLE COUPLING DEVICES
4 - PREFACE
5 - CONTENTS
6 - SECTION 1. SCOPE AND GENERAL
6 - 1.1 SCOPE.
6 - 1.2 REFERENCED DOCUMENTS.
6 - 1.3 DEFINITIONS.
6 - 1.3.1 Adaptor
6 - 1.3.2 Cable coupling device
6 - 1.3.3 Cable gland
6 - 1.3.4 End cover
6 - 1.3.5 Main contact pin
6 - 1.3.6 Main contact socket
6 - 1.3.7 Phase barrier
6 - 1.3.8 Pilot contact pin
6 - 1.3.9 Pilot contact socket
6 - 1.3.10 Regulatory Authority
6 - 1.3.11 Sealing device
6 - 1.3.12 Terminal
7 - 1.4 SERVICE CONDITIONS.
7 - 1.5 BODY SIZE, RATINGS AND DIMENSIONS.
7 - 1.6 COLOUR CODING.
7 - 1.7 MARKING.
7 - 1.7.1 Cable coupling devices and adaptors.
7 - 1.7.2 End covers.
13 - SECTION 2. DESIGN AND CONSTRUCTION
13 - 2.1 FLAMEPROOF ENCLOSURE.
13 - 2.2 CLEARANCE AND CREEPAGE.
13 - 2.3 CONSTRUCTION.
13 - 2.3.1 General.
13 - 2.3.2 Mechanical strength.
13 - 2.4 FASTENERS.
13 - 2.5 CABLE GLANDS.
13 - 2.6 TERMINALS.
13 - 2.6.1 General.
13 - 2.6.2 Conductor insertion diameter.
13 - 2.6.3 Conductor insertion depth.
13 - 2.7 CONTACT SOCKETS AND PINS.
13 - 2.7.1 Materials.
13 - 2.7.2 Construction of sockets.
13 - 2.7.3 Location of sockets and pins.
13 - 2.7.4 Earth circuits.
13 - 2.8 PHASE BARRIER.
13 - 2.9 INSULATION.
14 - 2.10 SEALING.
14 - 2.11 COMPOUND FILLING.
15 - SECTION 3. TESTING
15 - 3.1 CATEGORIES OF TESTS.
15 - 3.2 ROUTINE TESTS.
15 - 3.2.1 General.
15 - 3.2.2 Compliance.
15 - 3.2.3 Sample size.
15 - 3.2.4 High voltage test.
15 - 3.2.5 Contact pressure test.
15 - 3.3 TYPE TESTS.
15 - 3.3.1 List and order of type tests.
15 - 3.3.2 Cable gland (slip load) test.
16 - 3.3.3 Phase barrier (slip load) test.
16 - 3.3.4 Static pressure test.
16 - 3.3.5 Flameproof test.
16 - 3.3.6 High voltage test.
16 - 3.3.7 Short-circuit (through-fault) tests.
16 - 3.3.8 Temperature-rise test.

Specifies dimensional, electrical and mechanical requirements for bolted flameproof cable coupling devices for coupling two or more feeder cables or for coupling a cable to equipment.

Committee
EL-023
DocumentType
Standard
ISBN
0 7262 4839 8
Pages
12
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies the dimensional and test requirements for bolted flameproof cable coupling devices and adaptors of the multiple pin and contact-socket type with separate pins, referred to in this Standard as 'cable coupling devices', for use with restricted earth-fault systems in coal mines. The devices are designed to enable feeder cables to be coupled together, or to enable a cable to be coupled to equipment.Cable coupling devices and adaptors to this Standard are not intended to be coupled or uncoupled while the circuit is energized.The Standard prescribes the dimensions necessary to provide for the interconnection of cable coupling devices of different makes; it also deals with some electrical and mechanical requirements including the provision of earthed phase barriers for protection against interphase faults. It does not, however, purport to otherwise specify a fully detailed design.

AS/NZS 1972:2006 Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020)
AS 1828-1984 Electrical equipment for explosive atmospheres - Cable glands
AS 2380.6-1988 Electrical equipment for explosive atmospheres - Explosion-protection techniques Increased safety
AS 2700-1996 Colour Standards for general purposes - Swatches
AS/NZS 1802:2003 Electric cables - Reeling and trailing - For underground coal mining purposes
AS 1939-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code)
AS 1856-2004 Electroplated coatings - Silver
AS 2480-1986 Electrical equipment for explosive atmospheres- Flameproof enclosure - Type of protection d

MP 87.2:2007 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Recognized Service Facilities Program - Basic rules and procedures
AS 2380.2-1991 Electrical equipment for explosive atmospheres - Explosion-protection techniques Flameproof enclosure d
AS 2989-1992 Electrical equipment for coal mines - Specific requirements for high voltage circuit-breakers and disconnectors
AS 1747-1993 Reeling, trailing and feeder cables used for mining - Repair and testing
AS 60204.1-2005 Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD)
AS/NZS 2843.1:2000 Timber preservation plant safety code - Plant design
AS 2595.1-1992 Electrical equipment for coal mines - Electrical requirements for underground mining machines and accessories - Equipment for use in hazardous areas
HB 13-2007 Electrical equipment for hazardous areas
HB 13-2000 Electrical equipment for hazardous areas
AS/NZS 1747:2003 Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020)
MP 69-1993 Explosion-protected electrical equipment - Certification scheme - Policy
AS/NZS 60079.14:2009 Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD)
SAA HB37.2-1993 Handbook of Australian fire Standards Electrical equipment (Reconfirmed 2016)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.