• There are no items in your cart

AS 2047-1999

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Windows in buildings - Selection and installation

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

25-07-2024

Superseded by

AS 2047-2014

Published date

05-06-1999

€77.79
Excluding VAT

Specifies requirements for materials, construction, installation and glazing for windows, sliding doors, adjustable glass louvres, shopfronts, and window walls with one-piece framing elements.

Committee
BD/21
DocumentType
Standard
ISBN
0 7337 2720 4
Pages
51
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies requirements, materials, construction, installationand glazing for - (a) windows;(b) sliding glazed doors;(c) adjustable louvres; (d) shopfronts; and (e) window walls with one-piece framing elements.NOTE: Window walls do not include curtain walls using stacked or vertically spliced framingsystems, manufactured from any material and installed in external walls of all classes of buildings.Throughout this standard the term ‘window(s)’ means window of any type, including louvre(s) and sliding door(s).NOTES:1 The window ratings, or classifications, differ from previous glass and window Standards due to the more accurate evaluation of the effect of wind conditions. They are based on either AS 1170.2, or the specific wind loading code developed for housing, i.e. AS 4055.2 See Appendix A for information on wind loads applicable to windows covered by this Standard.3 See Appendix B for alternative means of demonstrating compliance with this Standard.4 Prefabricated bay windows that incorporate sloped glass are classified as windows in external walls.5 Refer to AS/NZS 4284 for performance specification of building facade. Conformance to the requirements in AS/NZS 4284 will be deemed to satisfy the requirements of this Standard. However, sliding window sashes or doors will require the operating force test in accordance with AS 4420.3.6 The following are not covered by this Standard: (a) Hinged doors, including French and bi-fold doors. (b) Revolving glazed doors. (c) Fixed louvres. (d) Skylights and roof lights and windows in other than the vertical plane. (e) Windows in greenhouses and agricultural buildings. (f) Sliding doors without frames such as internal doors and shopfront doors. (g) Windows constructed on site and architectural one-off windows, which are not designtested. (h) Second-hand windows, re-used windows, replacement windows, or recycled windows. (i)Heritage windows, for heritage buildings as defined by the relevant State or Territory authority.

Originated in part as part of SAA Int. 318-1951.
Final edition AS 2147-1996 and AS 2147.2-1996.
AS 2047.1-1996 and AS 2047.2-1996 revised, amalgamated and redesignated AS 2047-1999.
Reissued incorporating Amendment No. 1 (January 2001).
Reissued incorporating Amendment No. 2 (June 2001).

AS 2331.3.1-2001 Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017)
AS 3715-1989 Metal finishing - Thermoset powder coatings for architectural applications
AS/NZS 1080.1:1997 Timber - Methods of Test Moisture content
AS/NZS 1865:1997 Aluminium and aluminium alloys - Drawn wire, rod, bar and strip (Reconfirmed 2020)
AS 1288-2006 Glass in buildings - Selection and installation
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 1199-1988 Sampling procedures and tables for inspection by attributes
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 1288-1994 Glass in buildings - Selection and installation
AS 4055-1992 Wind loads for housing
AS 1728-1975 Types of timber surfaces
AS 1231-2000 Aluminium and aluminium alloys - Anodic oxidation coatings
AS 1874-2000 Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018)
AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)
AS 1789-1984 Electroplated coatings - Zinc on iron or steel
AS 1866:1997 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020)
AS 1866-1986 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes
AS 3715-2002 Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys
AS 1604-1997 Timber - Preservative-treated - Sawn and round
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS/NZS ISO 9000.1:1994 Quality management and quality assurance standards Guidelines for selection and use
AS 1665-1992 Welding of aluminium structures
AS 1397-1993 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS 1167.2-1986 Welding and brazing - Filler metals - Filler metal for welding
AS 1449-1994 Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip
AS/NZS 1605:1998 Methods for sampling and analysing timber preservatives and preservative-treated timber
AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS/NZS 2904:1995 Damp-proof courses and flashings
AS 2331.3.1-1980 Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray (NSS) test
AS 4420.2-1996 Windows - Methods of test - Deflection test
AS/NZS 2098.2:1996 Methods of test for veneer and plywood Bond quality of plywood (chisel test)
AS 1650-1989 Hot-dipped galvanized coatings on ferrous articles
AS/NZS 4284:1995 Testing of building facades
AS 4055-2006 Wind loads for housing
AS 4420.5-1996 Windows - Methods of test - Water penetration resistance test
AS 4420.6-1996 Windows - Methods of test - Ultimate strength test
AS/NZS ISO 9004.1:1994 Quality management and quality system elements Guidelines
AS/NZS 4491:1997 Timber - Glossary of terms in timber-related Standards (Reconfirmed 2016)
AS/NZS 1167.2:1999 Welding and brazing - Filler metals Filler metal for welding
AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS 1231-1985 Aluminium and aluminium alloys - Anodized coatings for architectural applications
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS 1874-1988 Aluminium and aluminium alloys - Ingots and castings
AS/NZS 2098.2:2006 Methods of test for veneer and plywood Bond quality of plywood (chisel test)
AS/NZS 1664.2:1997 Aluminium structures Allowable stress design (Reconfirmed 2020)
AS 4420.3-1996 Windows - Methods of test - Operating force test
AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020)
AS 4420.4-1996 Windows - Methods of test - Air infiltration test
AS 2754.2-1991 Adhesives for timber and timber products - Polymer emulsion adhesives

AS/NZS 4666:2000 Insulating glass units
AS 5040-2003 Installation of security screen doors and window grilles (Reconfirmed 2016)
AS 4085-1992 Automatic sliding door assemblies
AS 2021-2000 Acoustics - Aircraft noise intrusion - Building siting and construction
AS 5007-2007 Powered doors for pedestrian access and egress (Reconfirmed 2018)
AS 2796.2-2006 Timber - Hardwood - Sawn and milled products Grade description
AS 4290-2000 Design and installation of Revolving doors
AS 4785.2-2002 Timber - Softwood - Sawn and milled products Grade description (Reconfirmed 2016)
AS 1288-2006 Glass in buildings - Selection and installation
AS 4785.1-2002 Timber - Softwood - Sawn and milled products Product specification (Reconfirmed 2016)
AS/NZS 4290:1995 Design and installation of revolving doors
AS 1668.3-2001 The use of ventilation and airconditioning in buildings Smoke control systems for large single compartments or smoke reservoirs
HB 31-1992 Handbook of building construction tolerances - Extracts from building products and structures Standards
AS 2665-2001 Smoke/heat venting systems - Design, installation and commissioning (Reconfirmed 2016)
WS13-2012 Finishing Timber Externally
HB 125-2007 The glass and glazing handbook (including guide to AS 1288, Glass in buildings - Selection and installation)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.