• There are no items in your cart

AS 2089-2008

Current

Current

The latest, up-to-date edition.

Sheave blocks for lifting purposes (Reconfirmed 2019)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

23-01-2008

€77.79
Excluding VAT

1 - AS 2089-2008 SHEAVE BLOCKS FOR LIFTING PURPOSES
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Competent person
7 - 3.2 Fall of rope
7 - 3.3 Part of rope (fall of rope)
7 - 3.4 Self-coloured
7 - 3.5 Shall
7 - 3.6 Should
7 - 3.7 Sheave block
8 - 3.8 Working load limit (WLL)
8 - 3.9 Nominal size of sheaves and sheave blocks
8 - 3.10 Operation of sheave blocks
8 - 3.10.1 Manual operation
8 - 3.10.2 Power operation
8 - 3.11 Types of sheave block (see Figure 4)
8 - 3.11.1 Lead block
8 - 3.11.2 Snatch block
8 - 3.12 Components of sheave blocks (see Figure 5)
8 - 3.12.1 Axle
8 - 3.12.2 Bearing
8 - 3.12.3 Becket
8 - 3.12.4 Block shell
8 - 3.12.5 Crosshead
8 - 3.12.6 Head fitting
9 - 3.12.7 Identification plate or marking
9 - 3.12.8 Partition plate
9 - 3.12.9 Side plate
9 - 3.12.10 Side strap
9 - 3.12.11 Sheave
12 - 4 MATERIALS
12 - 4.1 Steel sections, plates, forgings and cast steels
12 - 4.2 Castings
12 - 4.3 Other materials
14 - 4.4 Bearings
14 - 4.5 Bolts, nuts and accessories
16 - 5 DESIGN AND MANUFACTURE
16 - 5.1 Loadings
16 - 5.2 Permissible working stresses
16 - 5.2.1 Heat treatment
17 - 5.2.2 Bending stresses in axles
17 - 5.2.3 Shear stress in axles and through-bolts
17 - 5.2.4 Bearing pressure on axles
17 - 5.2.5 Static bearing pressure
17 - 5.2.6 Tensile stress in screwed shanks of head fittings
18 - 5.2.7 Stresses in straps
18 - 5.2.8 Shear stress in straps
18 - 5.3 Side and partition plates (rope retention)
19 - 5.4 Hinged side straps
19 - 5.5 Rotating side plates
19 - 5.6 Sheaves
19 - 5.6.1 Manufacture
19 - 5.6.2 Diameter
19 - 5.6.3 Rope groove
20 - 5.7 Head fittings
20 - 5.7.1 Forged head fittings
20 - 5.7.2 Crosshead, hanger straps, eyes, and similar head fittings
21 - 5.7.3 Swivel head fittings
21 - 5.8 Screw threads
21 - 5.9 Axle
21 - 5.10 Beckets
21 - 5.11 Nut locking
22 - 5.12 Finish
22 - 5.13 Surface finish
22 - 5.14 Lubrication
22 - 5.15 Other standards
22 - 6 MECHANICAL PROPERTIES
22 - 6.1 Strength
22 - 6.2 Rotation
22 - 7 MARKING
23 - 8 TESTING OF MECHANICAL PROPERTIES
24 - 9 PROOF TESTING
24 - 9.1 Proof loading
24 - 9.2 Requirements
24 - 9.3 Test certificate
25 - APPENDIX A - INFORMATION THAT SHOULD BE SUPPLIED WITH ENQUIRIES AND ORDERS
25 - A1 BASIC INFORMATION
25 - A2 ADDITIONAL INFORMATION
26 - APPENDIX B - STANDARDS FOR COMPONENTS USED IN LIFTING SYSTEMS
27 - APPENDIX C - CARE AND USE
27 - C1 STORAGE
27 - C2 USE
28 - APPENDIX D - NON-LIFTING APPLICATIONS USING STEEL WIRE ROPE
29 - APPENDIX E - DETERMINATION OF WORKING LOAD LIMIT
30 - APPENDIX F - DESIGN OF SHEAVES
33 - APPENDIX G - OTHER STANDARDS RELEVANT TO THE DESIGN AND MANUFACTURE OF SHEAVE BLOCKS
35 - APPENDIX H - CONDITIONS FOR APPLICATION OF TEST FORCES
36 - APPENDIX I - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
36 - I1 SCOPE
36 - I2 STATISTICAL SAMPLING
36 - I3 PRODUCT CERTIFICATION
37 - I4 SUPPLIER’S QUALITY MANAGEMENT SYSTEM
37 - I5 OTHER MEANS OF ASSESSMENT

Specifies requirements for general purpose sheave blocks for lifting purposes. Guidance on information that should be supplied with enquiries and orders, on care and use and on use for non-lifting applications, is given in appendices.

Committee
ME-025
DocumentType
Standard
ISBN
0 7337 8517 4
Pages
32
ProductNote
Reconfirmation Notice 01/02/2019 Reconfirmed 01/02/2019.
This standard has been reconfirmed in Australia in 2019 and remains current in New Zealand.
PublisherName
Standards Australia
Status
Current
Supersedes

This Standard specifies requirements for general purposes sheave blocks or lifting mechanisms as specified in AS1418.1.Sheave blocks used for applications other than lifting may have sheaves that are smaller in diameter than those specified herein.This Standard covers sheave blocks with any type of bearing (i.e., frictionless or friction) and with any type of operating means (i.e., power driven or manual).This Standard does not cover sheave blocks for the conveyance of persons.Guidance on information that should be supplied with enquiries and orders is given in AppendixA.Standards for components that are used in lifting systems are listed in AppendixB.Guidance on care and use is given in AppendixC.Guidance on using sheave blocks for non-lifting applications is given in AppendixD.Requirements for the determination of the working load limit is given in AppendixE.

Originated as AS B247-1968.
Revised and redesignated AS 2089-1977.
Second edition 1993.
Third edition 2008.

AS 1418.17-1996 Cranes (including hoists and winches) Design and construction of workboxes (Reconfirmed 2016)
AS 1418.13-1996 Cranes (including hoists and winches) Building maintenance units
AS 1816.1-2007 Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 1171-1998 Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022)
AS 2741-2002 Shackles (Reconfirmed 2014)
AS 1418.11-2007 Cranes, hoists and winches - Vehicle-loading cranes
AS 1627.0-1997 Metal finishing - Preparation and pretreatment of surfaces Method selection guide (Reconfirmed 2017)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 2318-2006 Swivels for lifting applications (Reconfirmed 2022)
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 1627.6-2003 Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017)
AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS 1418.19-2007 Cranes, hoists and winches Telescopic handlers
AS 1418.15-1994 Cranes (including hoists and winches) - Concrete placing equipment
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS 1199.2-2003 Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016)
AS 1418.14-1996 Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
AS 2193-2005 Calibration and classification of force-measuring systems (Reconfirmed 2017)
AS 1418.12-1991 Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016)
AS 1418.18-2001 Cranes, hoists and winches Crane runways and monorails
AS 3777-1990 Shank hooks and large-eye hooks - Maximum 25 t
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 1065-1988 Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022)
AS 3501-1987 Parallel screw threads of whitworth form (BSW and BSF) and associated gauges and gauging practice (Reconfirmed 2017)
AS 3569-1989 Steel wire ropes
AS 1418.10(INT)-2004 Cranes, hoists and winches Elevating work platforms
AS 1650-1989 Hot-dipped galvanized coatings on ferrous articles
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 1418.16-1997 Cranes (including hoists and winches) Mast climbing work platforms
AS 1721-1985 General purpose metric screw threads (Reconfirmed 2017)

AS 2550.1-2011 Cranes, hoists and winches - Safe use General requirements
AS 3585-2008 End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
AS 1666.2-2009 Wire-rope slings Care and use (Reconfirmed 2019)
AS 3777-2008 Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS 1666.1-2009 Wire-rope slings Product specification (Reconfirmed 2019)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.