AS 2490-1997
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Sampling procedures and charts for inspection by variables for percent nonconforming
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
01-01-1997
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Provides sampling plans and procedures for inspection by variables. Three methods of determining acceptability are included viz. the 's' method, the 'o' method and the 'r' method. Appendices cover basic statistical theory, calculation of the estimated standard deviation and the use of the 'r' range method as an alternative to the 's' method. It is identical with and has been reproduced from ISO 3951:1989.
| Committee |
QR-008
|
| DocumentType |
Standard
|
| ISBN |
0 7337 1046 8
|
| Pages |
107
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This International Standard establishes sampling plans and procedures for inspection by variables. It is complementary to ISO 2859. When specified by the responsible authority, both this International Standard and ISO 2859 may be referenced in a product or process specification, contract, inspection instructions, or other documents, and the provisions set forth therein shall govern. The "responsible authority" shall be designated in one of the above documents. The object of the methods laid down in this International Standard is to ensure that lots of an acceptable quality have a high probability of acceptance and that the probability of not accepting inferior lots is as high as possible. In common with ISO 2859. the percentage of nonconforming products in the lots is used to define the quality of these lots and of the production process in question.
| Standards | Relationship |
| ISO 3951:1989 | Identical |
First published as AS 2490-1981.
Second edition 1997.
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS/NZS 1284.13:2002 | Electricity metering In-service compliance testing (Reconfirmed 2016) |
| AS 1952-1986 | Dispensing measures - Pharmaceutical - Glass |
| AS 3862-1991 | External fusion-bonded epoxy coating for steel pipes |
| AS ISO 10017-2006 | Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) |
| AS 1646.4-2005 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates |
| AS/NZS 1163:2016 | Cold-formed structural steel hollow sections |
| AS 3518.1-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes |
| AS 2698.1-1984 | Plastics pipes and fittings for irrigation and rural applications Polyethylene micro-irrigation pipe |
| AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
| AS 681.3-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber |
| AS/NZS 2869:1998 | Tampons - Menstrual |
| AS 2561-1982 | Guide to the determination and use of quality costs |
| AS 3879(INT)-1991 | Solvent cements and priming fluids for use with unplasticized PVC (UPVC) pipes and fittings |
| AS/NZS 60432.1:2007 | Incandescent lamps - Safety specifications Tungsten filament lamps for domestic and similar general lighting purposes (Reconfirmed 2018) |
| AS 681.1-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| AS 2224.2-1986 | Medicine measures (including paediatric droppers) Plastics - For domestic use |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS 1463-1988 | Polyethylene pipe extrusion compounds |
| AS 4113.1-1993 | Traffic signal lamps - Lamps for 240 V a.c. operation |
| AS 2908.1-1992 | Cellulose-cement products Corrugated sheets |
| AS 3518.2-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings |
| AS/NZS 2869:1995 | Tampons - Menstrual |
| AS 2908.2-1992 | Cellulose-cement products - Flat sheets |
| AS 4459.1-1999 | Methods of sampling and testing ceramic tiles Sampling and basis for acceptance |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS 1366.4-1989 | Rigid cellular plastics sheets for thermal insulation Rigid cellular polystyrene - Extruded (RC/PS-E) (Reconfirmed 2018) |
| AS/NZS 3679.1:2016 | Structural steel Hot-rolled bars and sections |
| AS 2055.1-1985 | PVC sheet floor-covering - Unbacked, flexible |
| AS 2224.1-1986 | Medicine measures (including paediatric droppers) Glass - For general use |
| AS 681.4-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements |
| AS/NZS 4944:2006 | Gas meters - In-service compliance testing (Reconfirmed 2017) |
| AS 3706.1-2012 | Geotextiles - Methods of test General requirements, sampling, conditioning, basic physical properties and statistical analysis (Reconfirmed 2023) |
| AS 2698.3-1990 | Plastics pipes and fittings for irrigation and rural applications Mechanical joint fittings for use with polyethylene micro-irrigation pipes (Reconfirmed 2017) |
| AS/NZS 2176.1:1996 | Primary batteries General (based on and including the full text of IEC 86-1) |
| AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
| AS 2869-2008 | Tampons - Menstrual |
| AS 1889.1-1984 | PVC floor tiles - Semi-rigid |
| AS 1889.2-1985 | PVC floor tiles - Flexible |
| AS 3571-1989 | Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications |
| AS 4371-2012 | Ceramic tableware |
| AS 4113.2-1993 | Traffic signal lamps Lamps for a.c. operation at extra-low voltage |
| AS 3706.1-2003 | Geotextiles Methods of test - General requirements, sampling, conditioning, basic physical properties and statistical analysis |
| AS 2620.1-1983 | Domestic garden hose - Reinforced hose |
| AS/NZS 3679.2:2010 | Structural steel Welded I sections |
| AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 3679.2-1991 | Structural steel - Welded sections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.