AS 5062:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fire protection for mobile and transportable equipment
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
11-07-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies fire risk management procedures and the minimum requirements for fire protection system design, installation, commissioning, and maintenance for use on mobile and transportable equipment. The requirements for listing of fire protection systems and the testing requirements for pre-engineered foam-water spray systems are also specified.
| Committee |
FP-022
|
| DevelopmentNote |
Under Revision by DR AS 5062:2021.
|
| DocumentType |
Standard
|
| ISBN |
978 1 76035 528 9
|
| Pages |
87
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies fire risk management procedures and the minimum requirements for fire protection system design, installation, commissioning, and maintenance for use on mobile and transportable equipment. The requirements for listing of fire protection systems and the testing requirements for pre-engineered foam-water spray systems are also specified.NOTE: Mobile and transportable equipment is generally referred to in this Standard as ‘equipment’.This Standard may be applied to the following equipment and industries:(a) Commercial and recreational vehicles, including the following:(i) Buses.(ii) Four-wheel drives.(iii) Road haulage.(iv) Motor homes.(v) Forklifts.(vi) Road registered plant.(vii) Pleasure craft.NOTE: National Standard for Commercial Vessels, Part C—Design and Construction, Section 4—Fire Safety covers the requirements for commercial marine applications.(b) Mobile and transportable equipment, including but not limited to the following industry sectors:(i) Mining and quarrying.(ii) Forestry.(iii) Waste management.(iv) Construction.(v) Railway.(vi) Agriculture.(vii) Defence.This Standard is intended for new equipment however, it is recommended that the Standard be applied to existing equipment.NOTE: For existing equipment, the fire risk assessment may identify the need for further risk reduction measures or modification of existing reduction measures (see Section 3).
First published as AS 5062-2006.
Second edition 2016.
Reissued incorporating Amendment No. 1 (April 2017).
| AS/RISSB 7529.1 : 2014 | Railway Rolling Stock - Fire Safety Locomotive Rolling Stock |
| AS/RISSB 7529.2 : 2014 | Railway Rolling Stock - Fire Safety Freight Rolling Stock |
| AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
| AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS 1318-1985 | Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) |
| AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
| AS 1674.1-1997 | Safety in welding and allied processes Fire precautions (Reconfirmed 2016) |
| AS/RISSB 7529.3 : 2014 | Railway Rolling Stock - Fire Safety Passenger Rolling Stock |
| AS 4024.1603-2006 | Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up (Reconfirmed 2014) |
| AS 2700-2011 | Colour standards for general purposes (Reconfirmed 2022) |
| AS 1674.2-2007 | Safety in welding and allied processes Electrical (Reconfirmed 2018) |
| AS 4487-2013 | Condensed aerosol fire extinguishing systems - Requirements for system design, installation and commissioning and test methods for components |
| AS 60068.2.2-2003 | Environmental testing Tests - Test B: Dry heat (Reconfirmed 2018) |
| AS/NZS 1850:2009 | Portable fire extinguishers - Classification, rating and performance testing (Reconfirmed 2021) |
| AS/NZS 3100:2009 | |
| AS 2030.1-2009 | Gas cylinders General requirements |
| AS 4343:2014 | Pressure equipment - Hazard levels |
| AS 60068.2.6-2003 | Environmental testing Tests - Test Fc: Vibration (sinusoidal) (Reconfirmed 2018) |
| AS 2444-2001 | Portable fire extinguishers and fire blankets - Selection and location (Reconfirmed 2021) |
| AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 61000.6.2:2006 | Electromagnetic compatibility (EMC) General standards - Immunity for industrial environments (Reconfirmed 2016) |
| AS 2473.1-2006 | Valves for compressed gas cylinders Specifications, type testing, and manufacturing tests and inspections (Reconfirmed 2017) |
| AS 3791-1991 | Hydraulic hose |
| ISO/TS 20474-14:2008 | Earth-moving machinery Safety Part 14: Information on national and regional provisions |
| AS 1180.10B-1982 | Methods of test for hose made from elastomeric materials Determination of combustion propagation characteristics of a horizontally oriented specimen of hose using surface ignition |
| AS/NZS 4801:2001 | Occupational health and safety management systems - Specification with guidance for use |
| AS/NZS 3509:2009 | LP Gas fuel vessels for automotive use (Reconfirmed 2019) |
| SA/SNZ HB 436:2013 | Risk management guidelines - Companion to AS/NZS ISO 31000:2009 |
| AS/NZS 61000.6.4:2012 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments |
| AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
| AS 1851-2012 | Routine service of fire protection systems and equipment |
| AS 2613-2005 | Safety devices for gas cylinders (Reconfirmed 2016) |
| AS/NZS 1841.1:2007 | Portable fire extinguishers General requirements (Reconfirmed 2021) |
| AS 1890-1999 | Thermally released links (Reconfirmed 2016) |
| AS 4587-1999 | Water mist fire protection systems - System design, installation and commissioning |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.