AS/NZS 1338.1:1992
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Filters for eye protectors Filters for protection against radiation generated in welding and allied operations
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
16-11-1992
Specifies requirements for filters used in eye protection against high intensity radiation emitted during welding and allied operations including electrically controlled filters. A classification system is provided together with transmittance requirements for such filters.
Committee |
SF-006
|
DocumentType |
Standard
|
ISBN |
0 7262 7758 4
|
Pages |
21
|
PublisherName |
Standards Australia
|
Status |
AvailableSuperseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for filters used in eye protectors intended to provide protection against radiation of high intensity emitted during welding and allied operations. It specifies the shade numbers and the transmittance requirements of the filters, and applies to filters made of glass or other materials for absorption of radiation. This Standard also applies to cover lenses employed for the protection of filters from damage by abrasion and weld spatter, and to filters incorporated in demonstration welding booths in so far as the relevant requirements of Table 2.1 and Table 2.2 are appropriate. Requirements for welding curtains and screens are covered in AS 3957/NZS 5852.NOTE: Guidance on the selection of filters is given in Appendix A.
In Australia First published as part of AS B91-1951.
Revised and redesignated AS Z45-1967.
Revised and redesignated AS 1338-1974.
Revised and redesignated in part as AS 1338.1-1981.
In New Zealand First published as NZS 5817.1:1983.
AS 1338.1-1981 and NZS 5817.1:1983 revised, amalgamated and designated as Joint Standard AS/NZS 1338.1:1992.
AS 1680.1-1990 | Interior lighting General principles and recommendations |
AS 2812-1985 | Welding, brazing and cutting of metals - Glossary of terms |
AS 2812-2005 | Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018) |
AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
AS 1337-1984 | Eye protectors for industrial applications |
AS/NZS 1338.2:1992 | Filters for eye protectors Filters for protection against ultraviolet radiation |
AS/NZS 3957:2006 | Light-transmitting screens and curtains for welding operations |
AS/NZS 1680.1:2006 | Interior and workplace lighting General principles and recommendations |
AS 1336-1982 | Recommended practices for eye protection in the industrial environment |
AS/NZS 1338.3:1992 | Filters for eye protectors Filters for protection against infra-red radiation |
AS/NZS 1337:1992 | Eye protectors for industrial applications |
AS 1988.1-2006 | Welding of ferrous castings - Steel castings |
AS 1720.4-2006 | Timber structures Fire resistance for structural adequacy of timber members |
AS/NZS 1554.3:2002 | Structural steel welding Welding of reinforcing steel |
AS/NZS 1554.1:1995 | Structural steel welding Welding of steel structures |
AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
AS 2717.3-1992 | Welding - Electrodes - Gas metal arc Corrosion-resisting chromium and chromium-nickel steel electrodes |
AS/NZS 2243.6:2010 | Safety in laboratories Plant and equipment aspects |
AS/NZS 1337.1:2010 | Personal eye protection Eye and face protectors for occupational applications |
AS/NZS 1067:2003 | Sunglasses and fashion spectacles |
AS/NZS ISO 14343:2006 | Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification (Reconfirmed 2017) |
AS/NZS 2243.1:1997 | Safety in laboratories General |
AS/NZS 1338.3:1992 | Filters for eye protectors Filters for protection against infra-red radiation |
AS/NZS 1554.4:2004 | Structural steel welding - Welding of high strength quenched and tempered steels |
AS 3580.6.1-1990 | Methods for sampling and analysis of ambient air Determination of ozone - Direct-reading instrumental method |
AS/NZS 1554.2:2003 | Structural steel welding Stud welding (steel studs to steel) |
AS 1674.2-2007 | Safety in welding and allied processes Electrical (Reconfirmed 2018) |
AS/NZS 1554.7:2006 | Structural steel welding Welding of sheet steel structures |
AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
AS/NZS 1554.5:2011 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 1674.2-2003 | Safety in welding and allied processes - Electrical |
AS 3853.1-2006 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone Sampling of airborne particles |
AS/NZS 1554.5:1995 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS/NZS 1554.4:2010 | Structural steel welding Welding of high strength quenched and tempered steels |
AS/NZS 4855:2007 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification |
AS 1485-1983 | Safety and health in workrooms of educational establishments |
AS/NZS 1554.6:2012 | Structural steel welding Welding stainless steels for structural purposes |
SAA HB 9-1994 | Occupational personal protection |
AS 4413-1996 | Steel tubes - Pressure application - Flash butt welding |
AS/NZS 1337.6:2012 | Personal eye protection Prescription eye protectors against low and medium impact |
AS/NZS ISO 17633:2006 | Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2004, MOD) (Reconfirmed 2017) |
AS/NZS 1337.6:2007 | Personal eye protection Prescription eye protectors against low and medium impact |
AS 1067.1-1990 | Sunglasses and fashion spectacles Safety requirements |
AS 2243.6-1990 | Safety in laboratories - Mechanical aspects |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS/NZS 2243.1:2005 | Safety in laboratories Planning and operational aspects |
AS/NZS 1553.3:1996 | Covered electrodes for welding - Corrosion-resisting chromium and chromium-nickel steel electrodes |
AS/NZS 1554.6:1994 | Structural steel welding - Welding stainless steels for structural purposes |
AS/NZS 2243.5:2004 | Safety in laboratories Non-ionizing radiations - Electromagnetic, sound and ultrasound |
AS/NZS 2243.3:2010 | Safety in laboratories Microbiological safety and containment |
AS 3853.2-2006 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone Sampling of gases (Reconfirmed 2016) |
AS 1774.10-1994 | Refractories and refractory materials - Physical test methods Pyrometric cone equivalent (refractoriness) |
AS/NZS 1554.5:2004 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS/NZS 1337:1992 | Eye protectors for industrial applications |
AS/NZS 1554.1:2000 | Structural steel welding Welding of steel structures |
AS/NZS 1338.2:1992 | Filters for eye protectors Filters for protection against ultraviolet radiation |
AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS/NZS 1554.3:2008 | Structural steel welding Welding of reinforcing steel |
AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
AS/NZS 1554.4:1995 | Structural steel welding - Welding of high strength quenched and tempered steels |
AS/NZS 3957:2006 | Light-transmitting screens and curtains for welding operations |
AS/NZS 1554.1:2011 | Structural steel welding Welding of steel structures |
AS/NZS 1665:2004 | Welding of aluminium structures (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.