AS/NZS 1677.2:1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Refrigerating systems Safety requirements for fixed applications
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
23-08-2024
05-01-1998
Specifies requirements for the safety aspects, in terms of the design, construction, installation and inspection of refrigerating appliances, systems and ancillary equipment intended for use or installation in institutional, public assembly, residential, commercial and industrial occupancies. It applies to new refrigerating systems, to extensions and modifications of existing systems and to used systems on being reinstalled and operated at another site. It also applies in the case of the conversion of a system for use with another refrigerant.
Committee |
ME-006
|
DocumentType |
Standard
|
ISBN |
0 7337 1685 7
|
Pages |
56
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for the safety aspects, in terms of the design, construction, installation and inspection, of refrigerating appliances, systems and ancillary equipment intended for use or installation in institutional, public assembly, residential, commercial and industrial occupancies. It includes heat pumps and reverse cycle airconditioning systems. It applies to new refrigerating systems, to extensions and modifications of existing systems and to used systems on being reinstalled and operated at another site. It also applies in the case of the conversion of a system for use with another refrigerant.It does not apply to specific requirements detailed in the following:(a) Household refrigerators covered by AS/NZS 4474.1.(b) Refrigerated room airconditioners covered by AS 1861.(c) Electrical approval and test specifications such as AS/NZS 3179, AS 3303, AS 3305 or NZS 6324.NOTES:1 This Standard is limited to fundamental safety requirements and does not purport to provide detailed design guidance.2 The requirements of this Standard are based on the assumption that refrigerating systems are designed, constructed, installed, inspected and maintained by competent personnel.3 The introduction of new refrigerants and techniques make it critical to ensure that the equipment to be installed or converted is suitable for use with the refrigerant to be used. Failure to observe appropriate precautions could lead to system failure resulting in injury or death.
First published in Australia as part of AS CB3-1933.
AS CB3-1933 redated 1939.
Second edition 1967.
Revised and redesignated AS 1677-1974.
Second edition 1981.
Third edition 1986.
First published in New Zealand as NZSS 1653:1962.
Revised and redesignated NZS 5235:1978.
NZS 5235.2 first published 1988.
NZS 5235:1978 revised and redesignated NZS 5235.1:1991.
AS 1677, NZS 5235.1:1991 and NZS 5235.2:1988 jointly revised, amalgamated and redesignated in part as AS/NZS 1677.2:1998.
AS 2106-1980 | Methods for the determination of the flashpoint of flammable liquids (closed cup) |
AS/NZS 1596:1997 | Storage and handling of LP Gas |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS 4041-1998 | Pressure piping |
AS 2971-1987 | Serially produced pressure vessels |
AS 1271-1997 | Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels |
AS 1674.1-1997 | Safety in welding and allied processes Fire precautions (Reconfirmed 2016) |
AS 1210-1989 | |
AS 1668.2-1991 | The use of mechanical ventilation and air-conditioning in buildings Mechanical ventilation for acceptable indoor-air quality |
AS 1530.4-1990 | Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction |
AS/NZS 4331.2:1995 | Metallic flanges Cast iron flanges (Reconfirmed 2020) |
AS 1170.4-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads |
AS/NZS 1571:1995 | Copper - Seamless tubes for airconditioning and refrigeration |
AS 1861.1-1988 | Air-conditioning units - Methods of assessing and rating performance Refrigerated room air-conditioners |
AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS/NZS 1200:1994 | Pressure equipment |
AS 2381.1-1991 | Electrical equipment for explosive atmospheres - Selection, installation and maintenance General requirements |
AS/NZS 4474.1:1997 | Performance of household electrical appliances - Refrigerating appliances Energy consumption and performance |
AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
AS 2430.1-1987 | Classification of hazardous areas - Explosive gas atmospheres |
AS/NZS 1716:1994 | Respiratory protective devices |
AS/NZS 1715:1994 | Selection, use and maintenance of respiratory protective devices |
AS/NZS 1677.1:1998 | Refrigerating systems Refrigerant classification |
AS 1939-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) |
AS 4332-1995 | The storage and handling of gases in cylinders |
AS/NZS 3179:1993 | Approval and test specification - Refrigerated room air-conditioners |
AS 2129-1994 | Flanges for pipes, valves and fittings |
AS/NZS 3788:1996 | Pressure equipment - In-service inspection |
AS 2812-1985 | Welding, brazing and cutting of metals - Glossary of terms |
AS 1358-1989 | Bursting discs and bursting disc devices - Guide to application, selection, and installation |
AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
AS 4024.1-1996 | Safeguarding of machinery General principles |
AS 3303-1995 | Approval and test specification - Particular requirements for refrigerators and food freezers |
AS 3873-1995 | Pressure equipment - Operation and maintenance |
AS 1861.2-1991 | Air-conditioning units - Methods of assessing and rating performance Refrigerated package air-conditioners |
AS 2022-1983 | Anhydrous ammonia - Storage and handling (known as the SAA Anhydrous Ammonia Code) |
AS 2473-1990 | Valves for compressed gas cylinders (threaded outlet) |
AS/NZS 4331.3:1995 | Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020) |
AS 3305-1988 | Approval and test specification - Particular requirements for motor compressors |
AS 1731.2-2003 | Refrigerated display cabinets General mechanical and physical requirements (Reconfirmed 2013) |
AS/NZS 1596:2002 | The storage and handling of LP Gas |
AS/NZS 2430.3.9:2004 | Classification of hazardous areas Examples of area classification - Miscellaneous |
AS 1731.2-2000 | Refrigerated display cabinets General mechanical and physical requirements |
AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
AS/NZS 5377:2013 | Collection, storage, transport and treatment of end-of-life electrical and electronic equipment |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS/NZS 2022:2003 | Anhydrous ammonia - Storage and handling (Reconfirmed 2023) |
AS/NZS 2712:2007 | Solar and heat pump water heaters - Design and construction (Reconfirmed 2020) |
AS/NZS 3788:2006 | Pressure equipment - In-service inspection (Reconfirmed 2017) |
AS/NZS 1596:2008 | The storage and handling of LP Gas |
AS/NZS 1677.1:1998 | Refrigerating systems Refrigerant classification |
AS/NZS 2712:2002 | Solar and heat pump water heaters - Design and construction |
AS 3864.1-2012 | Medical refrigeration equipment - For the storage of blood and blood products Manufacturing requirements |
AS 2971-2002 | Serially produced pressure vessels |
AS/NZS 1596:2014 | The storage and handling of LP Gas |
AS 2971-2007 | Serially produced pressure vessels (Reconfirmed 2017) |
AS 1668.2-2012 | The use of ventilation and airconditioning in buildings Mechanical ventilation in buildings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.