AS/NZS 2802:2000
Current
The latest, up-to-date edition.
Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
19-06-2000
Specifies the requirements for two classes of multicore elastomer insulated and sheathed flexible reeling and trailing cables for surface mining, underground mining (other than coal mining) and general use, where movable plant requires electricity supply at system voltages from 1.1/1.1kV up to and including 33/33kV.
Committee |
EL-003
|
DocumentType |
Standard
|
ISBN |
0 7337 3436 7
|
Pages |
54
|
ProductNote |
Reconfirmed 11/09/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 11/09/2020 |
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes | |
UnderRevision |
This Standard specifies requirements for two classes of multicore elastomer insulated and sheathed flexible reeling and trailing cables for surface mining, underground mining (other than coal mining) and general use, where plant requires electricity supply at system voltages from 1.1/1.1 kV up to and including 33/33 kV.The Class 1 cables are insulated with a high grade ethylene propylene rubber (XR-EP-90) which permits a reduced radial thickness for the insulation compared with equivalent rated Class 2 cables. The cable sheath is extra-heavy duty chlorosulphonated polyethylene, or chlorinated polyethylene (XHD-90-CSP, or CPE), or polychloroprene (XHD-85-PCP).The Class 2 cables are designed for manufacture using standard R-EP-90 insulation and HD-90-CSP, HD-90-CPE or HD-85-PCP sheath. The greater insulation radial thickness required for these cables provides a more robust cable.It is not intended that the use of other types of cables should be precluded and regulatory authorities may give approval to new types as they are developed. Appropriate requirements for new types and sizes will eventually be included in this Standard as the need arises.This Standard also provides the basis of requirements for construction of other sizes in the range of materials covered by this Standard.
Originated in Australia as AS C81-1941.
Previous edition in Australia AS 2802-1992.
Previous edition in New Zealand NZS/AS 2802-1992.
Jointly revised and designated AS/NZS 2802:2000.
Reissued incorporating Amendment No. 1 (December 2003).
AS/NZS 1660.4:1998 | Test methods for electric cables, cords and conductors Complete cable and flexible cord (Reconfirmed 2017) |
AS/NZS 1802:1995 | Electric cables - Reeling and trailing - For underground coal mining purposes |
AS 3007.2-1987 | Electrical installations - Surface mines and associated processing plant - General protection requirements |
AS/NZS 1660.2.5:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV (Reconfirmed 2017) |
AS/NZS 1660.2.3:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials (Reconfirmed 2017) |
AS/NZS 1660.5.1:1998 | Test methods for electric cables, cords and conductors Fire tests - Tests on bunched cables |
AS/NZS 1660.5.2:1998 | Test methods for electric cables, cords and conductors Fire tests - Smoke density |
AS/NZS 1660.2.2:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials (Reconfirmed 2017) |
AS/NZS 1660.1:1998 | Test methods for electric cables, cords and conductors Conductors and metallic components (Reconfirmed 2017) |
AS 3007.5-1987 | Electrical installations - Surface mines and associated processing plant - Operating requirements |
AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
AS/NZS 1660.5.6:1998 | Test methods for electric cables, cords and conductors Fire tests - Test for combustion propagation |
AS/NZS 1660.5.5:1998 | Test methods for electric cables, cords and conductors Fire tests - Circuit integrity under fire conditions |
AS/NZS 5000.1:1999 | Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 kV |
AS/NZS 1660.5.3:1998 | Test methods for electric cables, cords and conductors Fire tests - Determination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables |
AS/NZS 3863:2002 | Galvanized mild steel wire for armouring of cables |
AS 3007.4-1987 | Electrical installations - Surface mines and associated processing plant - Additional requirements for specific applications |
AS/NZS 1660.2.4:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to polyethylene and polypropylene materials (Reconfirmed 2017) |
AS 3863-1991 | Galvanized mild steel wire for armouring cables |
AS/NZS 1660.2.1:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application (Reconfirmed 2017) |
AS/NZS 1660.5.4:1998 | Test methods for electric cables, cords and conductors - Fire tests - Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity |
AS/NZS 1660.3:1998 | Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017) |
AS 3007.1-1987 | Electrical installations - Surface mines and associated processing plant - Scope and definitions |
AS/NZS 3808:2000 | Insulating and sheathing materials for electric cables (Reconfirmed 2017) |
AS/NZS 1125:2001 | Conductors in insulated electric cables and flexible cords (Reconfirmed 2017) |
AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
AS 1125-1993 | Conductors in insulated electric cables and flexible cords |
AS 3007.3-1987 | Electrical installations - Surface mines and associated processing plant - General requirements for equipment and ancillaries |
AS/NZS 5000.1:2005 | Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017) |
AS/NZS 1747:2022 | Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories |
AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
SA/SNZ HB 146:2018 | Management of electrical cable in mines and quarries |
AS/NZS 1300:2009 | Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices (Reconfirmed 2020) |
AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
AS/NZS 4761.2:2008 | Competencies for working with electrical equipment for hazardous areas (EEHA) Guide to assessing competency |
AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
HB 239:2011 | Guidance on the repair and overhaul of electrical equipment for explosive atmospheres |
AS/NZS 4761.1:2008 | Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards |
AS/NZS 1802:2018 | Electric cables - Reeling and trailing - For underground coal mining |
AS/NZS 1972:2002 | Electric cables - Underground coal mines - Other than reeling and trailing |
AS/NZS 3012:2003 | Electrical installations - Construction and demolition sites |
AS 2067:2016 | Substations and high voltage installations exceeding 1 kV a.c. |
AS/NZS 1747:2003 | Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020) |
AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
AS/NZS 1299:2009 | Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020) |
AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
SAA HB37.2-1993 | Handbook of Australian fire Standards Electrical equipment (Reconfirmed 2016) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.