AS/NZS 3718:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water supply - Tap ware
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
English
04-07-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This Standard specifies requirements for metallic taps, plastic taps, mixing taps, sensor taps, lever taps, time/flow taps, mixing taps mechanical (non-thermostatic), and tap sets in a range of nominal sizes from DN 6 to DN 50 generally for continuous operating temperatures not exceeding 80 degrees C.
| Committee |
WS-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5237 3
|
| Pages |
64
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for metallic taps, plastic taps, mixing taps, sensor taps, lever taps, time/flow taps, mixing taps mechanical (non-thermostatic), and tap sets in a range of nominal sizes from DN 6 to DN 50 generally for continuous operating temperatures not exceeding 80C. Products designed for other temperature ranges are included where tested to the appropriate temperature criteria. The Standard also specifies additional requirements for outlets that are an integral part of a tap or mixing tap and the requirements for tapset breaching piece assemblies. Means for demonstrating compliance with this Standard are given in Appendix A. NOTE: Certification under MP 52 is mandatory in Australia but not in New Zealand.
Revised and redesignated as AS B35-1931.
Revised and redesignated as AS 1718-1975.
AS 1718-1975 revised and redesignated in part as AS 1718-1988 and AS 3718-1988.
MP 52 first published 1988.
Second edition AS 3718-1990.
Second edition MP 52-1990.
MP 52-1990 revised in part and issued as third edition 1991.
Third edition AS 3718-1992.
Third edition AS 1718-1992.
Fourth edition MP 52-1993.
AS 3496 first published 1995.
AS 3718 jointly revised and designated as AS/NZS 3718:1997.
Fifth edition MP 52-1997.
Second edition AS 3496-1999.
Sixth edition MP 52-2001.
AS 1718-1992, AS 3496-1999, AS/NZS 3718:1997 and part of MP 52-2001 jointly revised, amalgamated and redesignated as AS/NZS 3718:2003.
| AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| AS 2345-1992 | Dezincification resistance of copper alloys |
| AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
| AS 2845.1-1995 | Water supply - Backflow prevention devices - Materials, design and performance requirements |
| AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
| AS 1568-1985 | Copper and copper alloys - Forging stock and forgings |
| AS/NZS 3499:1997 | Flexible tube connectors for water supply |
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 2831-1985 | Thermometers - Solid stem - Long and short - For precision use |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 3500.4.2:1997 | National Plumbing and Drainage Hot water supply systems - Acceptable solutions |
| AS/NZS 3500.0:1995 | National Plumbing and Drainage Code Glossary of terms |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS 1881-1986 | ZINC ALLOYS - CASTING INGOTS AND CASTINGS - QUALITY REQUIREMENTS (Reconfirmed 2018) |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
| AS 2738.2-1984 | Copper and copper alloys - Compositions and designations - Wrought products |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| AS 1567-1985 | Copper and copper alloys - Wrought rods, bars and sections |
| AS 3558.5-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016) |
| AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS/NZS 6400:2005 | Water efficient products - Rating and labelling |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
| ATS 5200.037-2004 | Technical Specification for plumbing and drainage products - Flow controllers |
| ATS 5200.007-2004 | Technical Specification for plumbing and drainage products - Water hammer arrestors |
| AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
| ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
| ATS 5200.046-2005 | Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush |
| AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.