AS/NZS 3750.13:1997
Current
The latest, up-to-date edition.
Paints for steel structures Epoxy primer (two-pack)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-11-1997
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Provides requirements for two-component epoxy primers for the protection of iron and steel and galvanized iron and steel against atmospheric corrosion in an industrial or marine environment.
| Committee |
CH/3
|
| DocumentType |
Standard
|
| ISBN |
0 7337 1330 0
|
| Pages |
16
|
| ProductNote | |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for two-component, epoxy primers for the protection of iron and steel and galvanized iron and steel against atmospheric corrosion in an industrial or marine environment. It is suitable for application by conventional air or airless spraying and may also be applied by roller or brush. Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference 6.This paint is intended for use as a primer in paint systems for the protection of iron and steel and galvanized iron and steel against corrosion involving wet and damp areas, high humidity, marine applications or industrial fallout.NOTES:1 This paint may be used as detailed for systems MP5 - I-L, MP6 -A-D, MP9 -C, MP10 -C, LP1- I and GZLP - F-I in AS/NZS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy primer is contained in Appendix B.4 Alternative methods for determining compliance with this Standard are contained in Appendix C.
Originated in Australia as AS 2674-1983.
Jointly revised and redesignated AS/NZS 3750.13:1997.
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS 1580.205.4-1981 | Paints and related materials - Methods of test Application properties - Airless spraying |
| AS 1580.205.2-1981 | Paints and related materials - Methods of test Application properties - Conventional air spraying |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS 1580.401.1-1981 | Paints and related materials - Methods of test Surface dry condition |
| AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
| AS 1580.402.1-1992 | Paints and related materials - Methods of test Bend test |
| AS 2508.3.016-1982 | Safe storage and handling information card - Methyl isobutyl ketone (MIBK) |
| AS 1580.105.2-1993 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS/NZS ISO 9000.1:1994 | Quality management and quality assurance standards Guidelines for selection and use |
| AS 2905-1986 | Steel drums |
| AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
| AS 1580.214.1-1990 | Paints and related materials - Methods of test - Consistency - Stormer viscometer |
| AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
| AS 3885-1991 | Paints for steel structures - Galvanized and zinc primed - Latex |
| AS/NZS 2310:1995 | Glossary of paint and painting terms |
| AS 1580.403.1-1981 | Paints and related materials - Methods of test Scratch resistance |
| AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
| AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
| AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
| AS 1580.481.1.7-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking |
| AS 1580.401.5-1993 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.205.3-1981 | Paints and related materials - Methods of test Application properties - Roller coating |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS 2854-1986 | Tinplate cans for general use |
| AS 1580.408.4-1993 | Paints and related materials - Methods of test Adhesion (cross-cut) |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
| AS 1580.108.2-1993 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge |
| AS/NZS ISO 9004.1:1994 | Quality management and quality system elements Guidelines |
| AS 1580.214.5-1990 | Paints and related materials - Methods of test - Consistency - Rotational viscometer |
| AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS 1580.105.1-1992 | Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning |
| AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
| AS 1580.481.1.10-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling |
| AS 1580.481.1.9-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering |
| AS 1580.205.1-1981 | Paints and related materials - Methods of test Application properties - Brushing |
| AS 3700-1998 | Masonry structures |
| AS/NZS 3750.6:2009 | Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020) |
| AS/NZS 2699.3:2000 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS 3750.14:1997 | Paints for steel structures High-build epoxy (two-pack) |
| AS 3750.10-2008 | Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019) |
| AS/NZS 2699.3:2002 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| AS/NZS 3750.5:2008 | Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020) |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
| AS/NZS 2280:2012 | Ductile iron pipes and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.