AS/NZS 5065:2005
Current
The latest, up-to-date edition.
Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
18-10-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for polyethylene (PE) and polypropylene (PP) pipes and fittings for sewerage and drainage applications, above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Includes requirements for both plain and structured wall pipes and fittings.
| Committee |
PL-006
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6948 9
|
| Pages |
30
|
| ProductNote |
Reconfirmed 27/01/2016.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 27/01/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for polyethylene (PE) and polypropylene (PP) pipes and fittings for sewerage and drainage applications, above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. It includes requirements for both plain and structured wall pipes and fittings.Pipes manufactured to this Standard are intended to be installed in accordance with AS2033, AS/NZS2566.2, AS/NZS3500.2, AS/NZS3500.3, WSA02 and other utility/authority requirements.
First published as AS/NZS 5065:2005.
Reissued incorporating Amendment No. 1 (February 2010).
Reissued incorporating Amendment No. 2 (November 2018).
| AS/NZS 4131:2003 | Polyethylene (PE) compounds for pressure pipes and fittings |
| AS 2033-1980 | Installation of polyethylene pipe systems |
| AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
| AS/NZS 1462.13(INT):2001 | Methods of test for plastics pipes and fittings Method for the determination of elastomeric seal joint contact width and pressure |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| AS/NZS 1462.8:1998 | Methods of test for plastics pipes and fittings Method of test for infiltration |
| AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
| AS/NZS 1462.25:2005 | Methods of test for plastics pipes and fittings Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method (Reconfirmed 2017) |
| AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
| AS/NZS 1462.23:1997 | Methods of test for plastics pipes and fittings - Method for determination of ring flexibility |
| AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 1462.28:2003 | Methods of test for plastics pipes and fittings Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds (Reconfirmed 2017) |
| AS 1745.2-1989 | Outdoor weathering of plastics in the Australian environment - Guide for design purposes |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS/NZS 1462.22:1997 | Methods of test for plastics pipes and fittings Method for determination of pipe stiffness |
| AS/NZS 1462.26:2003 | Methods of test for plastics pipes and fittings Determination of weathering resistance of plastics pipes for external storage (Reconfirmed 2017) |
| AS/NZS 1462.4:2002 | Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017) |
| AS/NZS 1462.10:1998 | Methods of test for plastics pipes and fittings Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications (Reconfirmed 2017) |
| AS/NZS 2566.1:1998 | Buried flexible pipelines Structural design |
| AS 2887-1993 | Plastic waste fittings |
| AS/NZS 1477:1999 | PVC pipes and fittings for pressure applications |
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS 1145.2-2001 | Determination of tensile properties of plastics materials Test conditions for moulding and extrusion plastics |
| AS/NZS 1462.1:2001 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings |
| AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| ATS 5200.055-2008 | Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications |
| AS/NZS 2033:2008 | Installation of polyethylene pipe systems |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.