AS/NZS ISO 9001:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Quality management systems - Requirements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
20-11-2024
30-12-2008
Specifies requirements for quality management systems. The requirements are generic, i.e. applicable to organizations regardless of size, type, industry, product or service. A quality management system that meets the requirements of AS/NZS ISO 9001 can be used for internal application by organizations, for certification and for contractural purposes. It focuses on the quality management system's effectiveness in meeting customer requirements, and may be used to demonstrate the ability to meet customer requirements, prevent nonconformity and address customer satisfaction and quality improvement. This Standard is identical with and has been reproduced from ISO 9001:2008. To assist organizations currently using AS/NZS ISO 9001:2000 to make the transition to AS/NZS ISO 9001:2008, the 2000 edition will remain available superseded until December 2011.
Committee |
QR-008
|
DocumentType |
Standard
|
ISBN |
0 7337 8970 6
|
Pages |
27
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
Standards | Relationship |
ISO 9001:2008 | Identical |
Originated in Australia as AS 3901 1987/ISO 9001:1990, AS 3902 1987/ISO 9002:1990 and AS 3903 1987/ISO 9003:1990.
Originated in New Zealand as NZS 5601:1987, NZS 5602:1987 and NZS 5603:1987.
Previous edition AS/NZS ISO 9001:2000.
Fourth edition 2008.
AS/NZS ISO 9000:2006 | Quality management systems - Fundamentals and vocabulary |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS/NZS ISO 14001:2004 | Environmental management systems - Requirements with guidance for use |
AS/NZS 4421:2011 | Guard and patrol security services |
AS 1085.14-2012 | Railway track material Prestressed concrete sleepers |
AS/NZS 3800:2012 | Electrical equipment for explosive atmospheres - Repair and overhaul |
AS 2561-2010 | Guide to the determination and the use of quality costs (Reconfirmed 2022) |
AS/NZS 1577:2013 | Scaffold decking components |
HB 393-2011 | Bunk beds for the short-term rental accommodation industry |
AS 4797-2009 | Stainless steel chain for lifting purposes (Reconfirmed 2019) |
AS 1597.2-2013 | Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height) |
AS ISO 15189-2009 | Medical laboratories - Particular requirements for quality and competence |
HB 90.1:2012 | The Small Business Handbook - Guide to ISO 9001:2008 |
AS/NZS 4677:2010 | Steel utility services poles |
AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
AS/NZS 1576.2:2009 | Scaffolding Couplers and accessories |
AS 1085.20-2012 | Railway track material Welding of steel rail |
AS/NZS 2728:2013 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
AS/NZS 4065:2010 | Concrete utility services poles |
AS ISO 15189-2013 | Medical laboratories - Requirements for quality and competence |
ATS 4747.8-2010 | Meters for non-urban water supply In-service compliance for non-urban water meters |
AS 2144:2014 | Traffic signal lanterns |
AS 3864.2-2012 | Medical refrigeration equipment - For the storage of blood and blood products User-related requirements for care, maintenance, performance verification and calibration |
AS 2030.1-2009 | Gas cylinders General requirements |
HB 239:2011 | Guidance on the repair and overhaul of electrical equipment for explosive atmospheres |
AS/NZS 4455.2:2010 | Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020) |
AS 4606-2012 | Grade S fire resistant and antistatic requirements for conveyor belting and conveyor accessories (Reconfirmed 2024) |
AS/NZS 2815.2:2013 | Training and certification of occupational divers Surface supplied diving to 30 m |
AS 4852.2-2009 | Variable message signs Portable signs |
AS 4852.1-2009 | Variable message signs Fixed signs |
SA HB 198:2014 | Guide to the specification and testing of slip resistance of pedestrian surfaces |
AS 3533.1-2009 | Amusement rides and devices Design and construction |
AS/NZS ISO/IEC 17024:2013 | Conformity assessment - General requirements for bodies operating certification of persons (Reconfirmed 2024) |
AS 5808-2009 | Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for nonpharmaceutical products (EN 862:2005, MOD) |
AS/NZS 3679.1:2010 | Structural steel Hot-rolled bars and sections |
AS 2758.5-2009 | Aggregates and rock for engineering purposes Coarse asphalt aggregates |
AS 5812-2011 | Manufacturing and marketing of pet food |
AS/NZS 3509:2009 | LP Gas fuel vessels for automotive use (Reconfirmed 2019) |
AS/NZS 3679.2:2010 | Structural steel Welded I sections |
AS/NZS 80079.34:2012 | Explosive atmospheres Application of quality systems for equipment manufacture |
AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 1666.1-2009 | Wire-rope slings Product specification (Reconfirmed 2019) |
AS 3569-2010 | Steel wire ropes - Product specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.