ASTM A 240/A240M : 2005
NA
NA
Status of Standard is Unknown
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-12-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
A 01
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
NA
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications.
1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
1.3 This specification is expressed in both inch-pound and SI units. However, unless the order specifies the applicable "M" specification designation (SI units), the material shall be furnished in inch-pound units.
| ASTM A 928/A928M : 2014 | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
| ASTM C 1277 : 2020 | Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
| ASTM F 2645 : 2016 | Standard Specification for Bun Slicing Machines |
| ASTM F 821/F821M : 2001 : R2018 | Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine |
| ASTM F 1047 : 2017 | Standard Specification for Frying and Braising Pans, Tilting Type |
| ASTM C 1861 : 2020 | Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster |
| ASTM A 666 : 2015 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| ASTM D 3603 : 2020 | Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
| ASTM F 825 : 1993 : R2017 | Standard Specification for Drawers, Furniture, Marine, Steel |
| ASTM F 1267 : 2018 | Standard Specification for Metal, Expanded, Steel |
| ASTM B 506 : 2016 | Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction |
| ASTM D 665 : 2019 | Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water |
| ASTM F 1602 : 2012 : R2017 | Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated |
| ASTM D 5977 : 2015 | Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures |
| ASTM A 358/A358M : 2019 | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| ASTM C 692 : 2013 : R2018 | Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel |
| ASTM F 1150 : 2016 | Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly |
| ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 | Standard Test Methods for Deep Foundations Under Lateral Load |
| ASTM F 824 : 1993 : R2017 | Standard Specification for Tables, Mess, Marine, Steel |
| ASTM F 3110 : 2014 : R2018 | Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ASTM F 1237 : 2015 | Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing (Withdrawn 2021) |
| ASTM C 1423 : 2016 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM F 2643 : 2020 | Standard Specification for Powered Pot, Pan and Utensil Washing Sinks |
| ASTM F 859 : 2015 | Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type |
| ASTM B 625 : 2017 | Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip |
| ASTM A 264 : 2012 : R2019 | Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate |
| ASTM F 857 : 2017 | Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type |
| ASTM D 5534 : 1994 : R2018 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
| ASTM F 1202 : 2016 | Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type |
| ASTM C 1644 : 2006 : R2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
| ASTM C 1696 : 2020 | Standard Guide for Industrial Thermal Insulation Systems |
| ASTM A 774/A774M : 2014 : R2019 | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
| ASTM F 2098 : 2018 | Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings |
| ASTM C 1802 : 2020 | Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures |
| ASTM D 972 : 2016 | Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
| ASTM D 2878 : 2010 : R2016 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| ASTM A 947M : 2016 | Standard Specification for Textured Stainless Steel Sheet [Metric] |
| ASTM C 921 : 2010 : R2015 | Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021) |
| ASTM F 1217 : 2017 | Standard Specification for Cooker, Steam |
| ASTM C 852/C852M : 2017 | Standard Guide for Design Criteria for Plutonium Gloveboxes |
| ASTM A 1069/A1069M : 2019 | Standard Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes |
| ASTM F 1966 : 2012 : R2017 : EDT 1 | Standard Specification for Dough Divider and Rounding Machines |
| ASTM C 1767 : 2019 | Standard Specification for Stainless Steel Jacketing for Insulation |
| ASTM A 778/A778M : 2016 | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| ASTM D 2595 : 2017 | Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range |
| ASTM F 2891 : 2015 : R2020 : EDT 1 | Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated |
| ASTM F 1604 : 2015 : R2020 : EDT 1 | Standard Specification for Freezers, Ice Cream, Soft Serve, Shake |
| ASTM F 1360 : 2017 | Standard Specification for Ovens, Microwave, Electric |
| ASTM C 1173 : 2018 | Standard Specification for Flexible Transition Couplings for Underground Piping Systems |
| ASTM C 1572/C1572M : 2018 | Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities |
| ASTM D 942 : 2019 | Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method |
| ASTM F 1114 : 2016 | Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray |
| ASTM F 2646 : 2016 | Standard Specification for Bread Slicing Machines |
| ASTM C 1540 : 2020 | Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
| ASTM F 1073 : 2019 | Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1603 : 2017 | Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated |
| ASTM A 263 : 2012 : R2019 | Standard Specification for Stainless Chromium Steel-Clad Plate |
| ASTM C 1533 : 2015 | Standard Guide for General Design Considerations for Hot Cell Equipment |
| ASTM C 1767M : 2019 | Standard Specification for Stainless Steel Jacketing for Insulation |
| ASTM D 4054 : 2020 : REV C | Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives |
| ASTM C 425 : 2004 : R2018 | Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings |
| ASTM F 1387 : 2019 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASTM F 1910 : 1998 : R2018 | Standard Specification for Long Barbed Tape Obstacles |
| ASTM A 480/A480M : 2020 : REV A | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| ASTM F 1203 : 2016 | Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type |
| ASTM F 1511 : 2018 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.