ASTM A 574 : 2017 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Alloy Steel Socket-Head Cap Screws
28-02-2022
English
01-06-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 01.09, 2018 Describes the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 inch in diameter for use where high strength is required.
| Committee |
F 16
|
| DocumentType |
Redline
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required.
1.2The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
1.3The following hazard caveat pertains only to the test method portions, sections 5.1, 5.6, 8, and 12, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| 10/30199074 DC : 0 | BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| SAE J58_201502 | Flanged 12-Point Screws |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| ASTM F 541 : 2012 : REDLINE | Standard Specification for Alloy Steel Eyebolts |
| ASTM F 2798 : 2009 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1718 : 2001 : R2013 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1476 : 2007 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM F 2798 : 2009 : R2018 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
| BS EN ISO 10442:2002 | Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors |
| MIL-S-21472 Revision C:1988 | SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR |
| MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| ASTM F 1233 : 2008 : R2013 | Standard Test Method for Security Glazing Materials And Systems |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| MIL S 1222 : H | STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS |
| IFI 124 : 2002 | TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS |
| ASTM F 1233 : 2008 | Standard Test Method for Security Glazing Materials And Systems |
| SAE J518/3_201511 | Hydraulic Flange Clamps, 2-Screw Flange Connection to be used with SAE J518-1 (Code 61) Connections where Only Low Pressure is Required |
| ASTM F 1718 : 2001 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 2798 : 2009 : R2014 : EDT 1 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
| ASTM F 1510 : 2007 : R2013 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| 15/30299570 DC : 0 | BS ISO 7195 - NUCLEAR ENERGY - PACKAGINGS FOR THE TRANSPORT OF URANIUM HEXAFLUORIDE (UF[6]) |
| MIL-DTL-55302-182 Revision C:2008 | Connectors, Printed Circuit Subassembly and Accessories: Guide Pins, Jackscrews and Mounting Ears |
| AISC 358 : 2016 | PREQUALIFIED CONNECTIONS FOR SPECIAL AND INTERMEDIATE STEEL MOMENT FRAMES FOR SEISMIC APPLICATIONS |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| SAE J518/2_201704 | Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 2: 42 MPa (Code 62) |
| ASTM F 1718 : 2001 : R2006 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1624 : 2012-11 | TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| SAE J518/1_201301 | Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 1: 3.5 MPa to 35 MPa (Code 61) |
| ASTM F 1476 : 2007 : R2013 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM F 1510 : 2007 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| EN ISO 10442:2002 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002) |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| SAE J2270_201606 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance |
| DIN ISO 6162-1:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| IFI 124 : 2002 : R2013 | TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS |
| DIN ISO 6162-2:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51 |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| ASTM F 606/F606M : 2016 : REDLINE | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| ASTM F 788 : 2013-04 | SPECIFICATION FOR SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS, INCH AND METRIC SERIES |
| ASTM F 2328 : 2017 : REDLINE | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| ASME B18.24 : 2015 | PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD FOR B18 FASTENER PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.