ASTM C 1240 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Silica Fume Used in Cementitious Mixtures
Available format(s)
PDF
Superseded date
23-05-2020
Superseded by
Language(s)
English
Published date
15-06-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 04.02, 2015 Defines silica fume for use in concrete and other systems containing hydraulic cement.
| Committee |
C 09
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This specification covers silica fume for use in concrete and other systems containing hydraulic cement.
1.2In the cases of slurried or densified silica fume, perform the tests on the raw silica fume from which these products have been made.
1.3The units stated in SI are to be regarded as the standard. No other units of measurement are included in this standard.
1.4The following safety hazards caveat pertains only to the test methods portions, Sections 10 – 19, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Read the material safety data sheets for materials used.
1.5The text of this standard references notes and footnotes that provide explanatory information. These notes and footnotes (excluding those in tables) shall not be considered as requirements of this standard.
| ASTM C 1141/C1141M : 2015 : REDLINE | Standard Specification for Admixtures for Shotcrete |
| ACI 237R : 2007 | SELF-CONSOLIDATING CONCRETE |
| ACI 523.1R : 2006 | GUIDE FOR CAST-IN-PLACE LOW DENSITY CELLULAR CONCRETE |
| ACI 376 : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES AND COMMENTARY |
| ACI 506.5R : 2009 | GUIDE FOR SPECIFYING UNDERGROUND SHOTCRETE |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| ACI 311.4R : 2005 | GUIDE FOR CONCRETE INSPECTION |
| ACI 225R : 2019 | GUIDE TO THE SELECTION AND USE OF HYDRAULIC CEMENTS |
| ASTM C 1293 : 2008 : REV B : R2015 | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| AASHTO M 321 : 2004(R2017) | SPECIFICATION FOR HIGH-REACTIVITY POZZOLANS FOR USE IN HYDRAULIC-CEMENT CONCRETE, MORTAR, AND GROUT |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI 350.5 : 2012 | SPECIFICATIONS FOR ENVIRONMENTAL CONCRETE STRUCTURES |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| ASTM C 441/C441M : 2017 : REDLINE | Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction |
| ASTM C 936/C936M : 2016-07 | SPECIFICATION FOR SOLID CONCRETE INTERLOCKING PAVING UNITS |
| ASTM C 1293 : 2008 : REV A | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| ASTM D 5370 : 2014 : REDLINE | Standard Specification for Pozzolanic Blended Materials in Construction Applications |
| NACE 02203 : 0 | DESIGN, INSTALLATION, AND MAINTENANCE OF PROTECTIVE POLYMER FLOORING SYSTEMS FOR CONCRETE |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| ASTM C 1778 : 2016 : REDLINE | Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete |
| ASTM C 387/C387M : 2017 : REDLINE | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
| ASTM C 1782/C1782M : 2017-07 | SPECIFICATION FOR UTILITY SEGMENTAL CONCRETE PAVING SLABS |
| ACI 560R : 2016 | REPORT ON DESIGN AND CONSTRUCTION WITH INSULATING CONCRETE FORMS (ICFS) |
| ACI 225R : 2016 | GUIDE TO THE SELECTION AND USE OF HYDRAULIC CEMENTS |
| ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| ASTM C 1670 : 2013 | Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units |
| ASTM C 1804 : 2014 : EDT 1 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
| ACI 362.1R : 2012 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF DURABLE CONCRETE PARKING STRUCTURES |
| ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ACI 376M : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES (METRIC) |
| CTI ESG 153 : 0 | RECOMMENDED GUIDELINES FOR PORTLAND CEMENT CONCRETE FOR MECHANICAL DRAFT COOLING TOWERS |
| ASTM C 1790 : 2015 : REDLINE | Standard Specification for Fly Ash Facing Brick |
| ACI 533R : 2011 | GUIDE FOR PRECAST CONCRETE WALL PANELS |
| ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI PRC-506 : 2016 | GUIDE TO SHOTCRETE |
| ACI 221.1R : 1998 | REPORT ON ALKALI-AGGREGATE REACTIVITY |
| ACI E3 : 2013 | CEMENTITIOUS MATERIALS FOR CONCRETE |
| ACI 543R : 2012 | GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES |
| ACI 506.2M : 2013 | SPECIFICATION FOR SHOTCRETE [METRIC] |
| ACI 211.4R : 2008 | GUIDE FOR SELECTING PROPORTIONS FOR HIGH-STRENGTH CONCRETE USING PORTLAND CEMENT AND OTHER CEMENTITIOUS MATERIALS |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| ICC IRC Code and Commentary Volume 1 : 2015 | IRC® Code and Commentary, Volume 1 |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
| ACI ITG-4.1 : 2007 | SPECIFICATION FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
| ACI 304.3R : 1996 | HEAVYWEIGHT CONCRETE: MEASURING, MIXING, TRANSPORTING, AND PLACING |
| ACI 304.2R : 2017 | GUIDE TO PLACING CONCRETE BY PUMPING METHODS |
| 08/30160023 DC : DRAFT AUG 2008 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| ACI 325.14R : 2017 | GUIDE FOR DESIGN AND PROPORTIONING OF CONCRETE MIXTURES FOR PAVEMENTS |
| ACI 318M : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318M-14) AND COMMENTARY (ACI 318RM-14) |
| ACI 303.1 : 1997 | STANDARD SPECIFICATION FOR CAST-IN-PLACE ARCHITECTURAL CONCRETE |
| ACI 234R : 2006 | GUIDE FOR THE USE OF SILICA FUME IN CONCRETE |
| ACI 345R : 2011 | GUIDE FOR CONCRETE HIGHWAY BRIDGE DECK CONSTRUCTION |
| ACI 222.3R : 2011 | GUIDE TO DESIGN AND CONSTRUCTION PRACTICES TO MITIGATE CORROSION OF REINFORCEMENT IN CONCRETE STRUCTURES |
| ASTM C 685/C685M : 2017 : REDLINE | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
| ASTM C 1837 : 2017 | Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures |
| ASTM C 1804 : 2014 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
| ACI 221.1R : 1998(R2008) | REPORT ON ALKALI-AGGREGATE REACTIVITY |
| ACI 522R : 2010(R2011) | REPORT ON PERVIOUS CONCRETE |
| ACI 304.3R : 1996(R2004) | HEAVYWEIGHT CONCRETE: MEASURING, MIXING, TRANSPORTING, AND PLACING |
| ACI 522R : 2010 | REPORT ON PERVIOUS CONCRETE |
| ASTM C 441 : 2005 | Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction |
| ACI ITG-4.2R : 2006 | MATERIALS AND QUALITY CONSIDERATIONS FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
| ACI 363R : 2010 | REPORT ON HIGH-STRENGTH CONCRETE |
| ASTM C 1709 : 2011 | Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete |
| ASTM C 1293 : 2008 : REV B | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| CSA N287.5 :2011 | EXAMINATION AND TESTING REQUIREMENTS FOR CONCRETE CONTAINMENT STRUCTURES FOR NUCLEAR POWER PLANTS |
| ACI PRC-308 : 2016 | GUIDE TO EXTERNAL CURING OF CONCRETE |
| CSA A3000 : 2013 | CEMENTITIOUS MATERIALS COMPENDIUM |
| ASTM E 2129 : 2010-11 | PRACTICE FOR DATA COLLECTION FOR SUSTAINABILITY ASSESSMENT OF BUILDING PRODUCTS |
| ASTM C 1567 : 2013 : REDLINE | Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) |
| ASTM C 1437 : 2015 : REDLINE | Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 604 : 2002 : R2007 | Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer |
| ASTM C 1157/C1157M : 2017 : REDLINE | Standard Performance Specification for Hydraulic Cement |
| ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
| ASTM C 494/C494M : 2017 : REDLINE | Standard Specification for Chemical Admixtures for Concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.