ASTM C 566 : 2019
|
Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
|
ASTM D 4469 : 2017
|
Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures
|
ASTM C 127 : 2015
|
Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024)
|
ASTM C 1688/C1688M : 2014 : REV A
|
Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023)
|
ASTM D 6932/D6932M : 2021
|
Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures
|
ASTM C 702/C702M : 2018
|
Standard Practice for Reducing Samples of Aggregate to Testing Size
|
ASTM C 144 : 2018
|
Standard Specification for Aggregate for Masonry Mortar
|
ASTM C 192/C192M : 2019
|
Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
|
ASTM D 6995 : 2021
|
Standard Test Method for Determining Field VMA Based on the Maximum Specific Gravity of an Asphalt Mixture (G<inf>mm</inf>)
|
ASTM C 1800/C1800M : 2016
|
Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
|
ASTM C 1260 : 2022
|
Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
|
ASTM C 1439 : 2019
|
Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
|
ASTM D 8140 : 2018
|
Standard Guide for the Use of Foundry Sand in Asphalt Mixtures
|
ASTM C 1810/C1810M : 2021 : REV A
|
Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
|
ASTM C 330/C330M : 2017 : REV A
|
Standard Specification for Lightweight Aggregates for Structural Concrete
|
ASTM D 3910 : 2021
|
Standard Practices for Design, Testing, and Construction of Slurry Seal
|
ASTM D 2172/D2172M : 2017 : EDT 1
|
Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
|
ASTM D 4215 : 2021
|
Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures
|
ASTM D 6023 : 2016
|
Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
|
ASTM C 1077 : 2017
|
Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
|
ASTM C 1252 : 2017
|
Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
|
ASTM C 1761/C1761M : 2017
|
Standard Specification for Lightweight Aggregate for Internal Curing of Concrete
|
ASTM C 70 : 2020
|
Standard Test Method for Surface Moisture in Fine Aggregate
|
ASTM C 604 : 2018
|
Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
|
ASTM D 4460 : 2022 : REV A
|
Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods
|
ASTM D 7564/D7564M : 2016
|
Standard Practice for Construction of Asphalt-Rubber Cape Seal
|
ASTM C 404 : 2018
|
Standard Specification for Aggregates for Masonry Grout
|
ASTM D 7370/D7370M : 2014 : R2021
|
Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
|
ASTM C 1567 : 2022
|
Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
|
ASTM C 123/C123M : 2014
|
Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023)
|
ASTM C 780 : 2020
|
Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
|
ASTM C 87/C87M : 2017
|
Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
|
ASTM C 29/C29M : 2017 : REV A
|
Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
|
ASTM C 637 : 2020
|
Standard Specification for Aggregates for Radiation-Shielding Concrete
|
SSPC-AB 3:2017(R2023)
|
Ferrous Metallic Abrasive
|