![header thumbnail](/images/publishers\astm_cover.gif)
ASTM C 172/C172M : 2017 : REDLINE
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Sampling Freshly Mixed Concrete
English
02-11-2017
CONTAINED IN VOL. 04.02, 2017 Defines procedures for obtaining representative samples of fresh concrete as delivered to the project site on which tests are to be performed to determine compliance with quality requirements of the specifications under which the concrete is furnished.
Committee |
C 09
|
DevelopmentNote |
Supersedes ASTM C 172. (11/2010)
|
DocumentType |
Redline
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice covers procedures for obtaining representative samples of fresh concrete as delivered to the project site on which tests are to be performed to determine compliance with quality requirements of the specifications under which the concrete is furnished (Note 1). The practice includes sampling from stationary, paving and truck mixers, and from agitating and nonagitating equipment used to transport central-mixed concrete and from continuous mixing equipment as described in Specification C685/C685M.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Note 1:Composite samples are required by this practice, unless specifically excepted by procedures governing the tests to be performed such as tests to determine uniformity of consistency and mixer efficiency. Procedures used to select the specific test batches are not described in this practice, but it is recommended that random sampling be used to determine overall specification compliance.
1.3This practice also covers the procedures to be used for preparing a sample of concrete for further testing where it is desirable or necessary to remove the aggregate larger than a designated size. This removal of larger aggregate particles is preferably accomplished by wet-sieving.
1.4The text of this standard references notes and footnotes which provide explanatory material and shall not be considered as requirements of the practice.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2)
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
ICC IBC INTERNATIONAL BUILDING CODE : 2015 | INTERNATIONAL BUILDING CODE |
ISO 1920-2:2016 | Testing of concrete Part 2: Properties of fresh concrete |
ASTM C 1090/C1090M : 2015 : REDLINE | Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout |
I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
ASTM C 1753 : 2015 | Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements |
ASTM C 1064/C1064M : 2017 : REDLINE | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
ASTM C 31/C31M : 2018-02 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE FIELD |
ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
EN 16640:2017/AC:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
ACI 207.5R : 2011 | REPORT ON ROLLER-COMPACTED MASS CONCRETE |
ASTM C 935 : 2013 | Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast |
ASTM C 1712 : 2017 : REDLINE | Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test |
ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
AASHTO T 197M/T 197 : 1900 | METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE |
ASTM C 1804 : 2014 : EDT 1 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
ACI PRC-363.2 : 2011 | GUIDE TO QUALITY CONTROL AND ASSURANCE OF HIGH-STRENGTH CONCRETE |
ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
ACI 318M : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318M-14) AND COMMENTARY (ACI 318RM-14) |
ACI 543R : 2012 | GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES |
ASTM C 1731 : 2016 : REDLINE | Standard Specification for Concrete Floor Tile |
UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method |
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
ACI 214R : 2011 | GUIDE TO EVALUATION OF STRENGTH TEST RESULTS OF CONCRETE |
BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
DIN EN 16785-1 E : 2016 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
ASTM C 1768/C1768M : 2012 | Standard Practice for Accelerated Curing of Concrete Cylinders |
ASTM C 1077 : 2017 : REDLINE | Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation |
EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
ASTM C 1679 : 2017 : REDLINE | Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry |
ACI 314R : 2016 | GUIDE TO SIMPLIFIED DESIGN FOR REINFORCED CONCRETE BUILDINGS |
ASTM C 1804 : 2014 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
ASTM C 1768/C1768M : 2012 : R2017 | Standard Practice for Accelerated Curing of Concrete Cylinders |
ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.