ASTM D 1414 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Rubber O-Rings
Hardcopy , PDF
31-12-2022
English
24-09-2015
These test methods describe the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
Committee |
D 11
|
DocumentType |
Test Method
|
Pages |
11
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1These test methods describe the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F 477 : 2014 | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
ASTM D 4054 : 2019 | Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives |
ASTM F 913 : 2002 : R2014 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe |
ASTM F 152 : 1995 : R2017 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
ASTM D 711 : 2020 | Standard Test Method for No-Pick-Up Time of Traffic Paint |
ASTM F 913 : 2002 : R2021 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe |
ASTM D 5964 : 2016 : R2021 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
ASTM F 477 : 2014 : R2021 | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
ASTM D 7826 : 2021 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4054 : 2022 | Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives |
ASTM D 5964 : 2016 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
ASTM D 6546 : 2015 | Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications |
ASTM D 711 : 2010 : R2015 | Standard Test Method for No-Pick-Up Time of Traffic Paint |
ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 471 : 2016 : REV A | Standard Test Method for Rubber Property—Effect of Liquids |
ASTM D 1329 : 1988 : R1998 | Standard Test Method for Evaluating Rubber Property-Retraction at Lower Temperatures (TR Test) |
ASTM D 1329 : 2008 | Standard Test Method for Evaluating Rubber Property<span class='unicode'>—</span>Retraction at Lower Temperatures (TR Test) |
ASTM D 3767 : 2003 | Standard Practice for Rubber-Measurement of Dimensions |
ASTM D 4483 : 1999 | Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries |
ASTM D 1415 : 2005 | Standard Test Method for Rubber Property—International Hardness |
ASTM D 4483 : 2020 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 4483 : 2005 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 1415 : 1988 : R1999 | Standard Test Method for Rubber Property-International Hardness |
ASTM D 1415 : 2018 | Standard Test Method for Rubber Property—International Hardness |
ASTM D 1415 : 1988 : R2004 | Standard Test Method for Rubber Property—International Hardness |
ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 412 : 2016 : EDT 1 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 3767 : 2003 : R2014 | Standard Practice for Rubber—Measurement of Dimensions |
ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 471 : 2016 : REV A : R2021 | Standard Test Method for Rubber Property—Effect of Liquids |
ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 3767 : 2003 : R2008 | Standard Practice for Rubber<span class='unicode'>—</span>Measurement of Dimensions |
ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 1415 : 1968 | Standard Test Method for International Hardness Of Vulcanized Rubber |
ASTM D 2240 : 2015 : R2021 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1415 : 1988 : R1994 | Standard Test Method for Rubber Property-International Hardness |
ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 4483 : 2005 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 1329 : 2002 | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
ASTM D 1329 : 2016 | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1415 : 2006 : R2012 | Standard Test Method for Rubber Property—International Hardness |
ASTM D 3767 : 2003 : R2020 | Standard Practice for Rubber—Measurement of Dimensions |
ASTM D 3767 : 1996 | Standard Practice for Rubber-Measurement of Dimensions |
ASTM D 1415 : 2006 | Standard Test Method for Rubber Property—International Hardness |
ASTM D 297 : 2015 : R2019 | Standard Test Methods for Rubber Products—Chemical Analysis |
ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 4483 : 2014 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 4483 : 2014 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 4483 : 2018 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 4483 : 2005 : REV A : R2011 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 297 : 2021 | Standard Test Methods for Rubber Products—Chemical Analysis |
ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 3767 : 2001 | Standard Practice for Rubber-Measurement of Dimensions |
ASTM D 1329 : 2016 : R2021 | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.