ASTM C 156 : 2017 : REDLINE
|
Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete |
SAE AMS 3116 A : 2005
|
PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
DOD-E-18214 Revision B:1978
|
ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
SSPC-PAINT 44 : 2013
|
LIQUID-APPLIED ORGANIC POLYMERIC COATINGS AND LININGS FOR CONCRETE STRUCTURES IN MUNICIPAL WASTEWATER FACILITIES, PERFORMANCE-BASED |
MIL-DTL-1115 Revision E:2010
|
ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
DOD-E-1265 Revision D:1977
|
ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC |
ASTM D 3806 : 1998 : R2004
|
Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
ASTM D 5860 : 1995
|
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
DWA-M 143-20:2018
|
TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
MIL-P-15930 Revision C:1981
|
PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) |
DOD P 24631 : (1) SUPP 1
|
PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
CSA Z245.20-Z245.21 : 2006
|
EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE |
MIL-PRF-32584 Base Document:2017
|
Deck Covering Materials, Monolithic |
MIL-DTL-24631 Revision A:1997
|
PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
DOD-V-15218 Revision C:1977
|
VARNISH (MIXING, PHENOLIC) (METRIC) |
MIL A 3316 : C
|
ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
DOD-P-15144 Revision B:1977
|
PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) |
MIL-DTL-700 Revision B:1998
|
ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
MIL-C-46168 Revision D:1987
|
COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
MIL-DTL-24441 Revision D:2009
|
PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
AASHTO M 300 : 2003
|
SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
ASTM D 3927 : 1987
|
Guide for State and Institutional Purchasing of Paint (Withdrawn 1991) |
MIL-PRF-32171 Revision B:2009
|
DECK COATINGS, HIGH DURABILITY |
MIL-R-15189 Revision B:1986
|
RESIN, ALKYD PHENOLIC |
MIL P 53030 : A
|
PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
MIL C 47257 : C
|
COMPOUND, EPOXY, FILAMENT WINDING |
TT-P-645 Revision C:2013
|
PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
TT-P-641 Revision G:1976
|
PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES) |
ASTM D 5860 : 1995 : R2007
|
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
ASTM D 5286 : 2001 : R2017
|
Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
SAE AMS C 27725 : 2016
|
COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C) |
ASTM D 5066 : 1991 : R2017
|
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis |
SAE AMS 3126 : 2013
|
Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
ASTM D 6686 : 2001 : R2008 : EDT 1
|
Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
ASTM D 3065 : 2001 : R2013
|
Standard Test Methods for Flammability of Aerosol Products (Withdrawn 2022) |
ASTM D 4142 : 1989 : R2017
|
Standard Guide for Testing Epoxy Resins |
ASTM D 6686 : 2001
|
Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
ASTM D 2805 : 2011 : R2018
|
Standard Test Method for Hiding Power of Paints by Reflectometry |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 6577 : 2015 : REDLINE
|
Standard Guide for Testing Industrial Protective Coatings |
ASTM D 6093 : 1997 : R2003
|
Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
ASTM D 6532 : 2000 : R2014
|
Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
ASTM E 1795 : 2017 : REDLINE
|
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 5860 : 1995 : R2002
|
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
ASTM D 5201 : 2005 : REV A
|
Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
ASTM D 8008 : 2015
|
Standard Practice for Representative Field Sampling of Traffic Paints |
ASTM D 6266 : 2000 : REV A
|
Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
ASTM F 940 : 1999 : R2013
|
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM D 5913 : 1996 : R2013
|
Standard Test Method for Evaluation of Cleanability of Paint Brushes |
ASTM E 1868 : 2010
|
Standard Test Method for Loss-On-Drying by Thermogravimetry |
ASTM F 940:1999
|
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM D 5150 : 1992 : R2017
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM D 6237 : 2009 : R2015
|
Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
ASTM D 5913 : 1996 : R2003
|
Standard Test Method for Evaluation of Cleanability of Paint Brushes |
ASTM D 7489 : 2009
|
Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
ASTM C 1241 : 2014 : REDLINE
|
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
ASTM D 3925 : 2002 : R2010
|
Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
ASTM D 961 : 1986 : R1995 : EDT 1
|
Standard Specification for Dehydrated Castor Oil |
ASTM D 5066 : 1991 : R2001
|
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis |
ASTM D 7073 : 2005
|
Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
ASTM E 1797 : 2012
|
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 3105 : 2017 : REDLINE
|
Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
ASTM D 6093 : 1997 : R2016
|
Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
ASTM D 5066 : 1991 : R2011
|
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis |
ASTM D 7072 : 2004
|
Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
MIL-DTL-53084 Revision B:2011
|
Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
SAE AMS 3109 : 2014
|
PRIMER, ADHESIVE, ELECTRODEPOSITED -55 TO +82 DEGREES C (-67 TO +180 DEGREES F) |
ASTM D 344 : 2011 : R2016
|
Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts (Withdrawn 2018) |
MIL-C-81945 Revision B:1989
|
COATING COMPOUND, WEAPON INSULATION, INTUMESCENT |
MIL L 46147 : B
|
LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING) |
MIL-C-83231 Revision A:1981
|
COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS |
SAE AMS 3166 : 2014
|
SOLVENTS, CLEANING, CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS |
SSPC-PAINT 38 : 2013
|
SINGLE-COMPONENT MOISTURE-CURE WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED |
DOD-P-15328 Revision D:1978
|
PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
MIL P 53022 : B
|
PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
SAE AMS 3107 : 1983(R2014)
|
PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
DOD E 700 : A
|
ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
MIL-P-24351 Revision A:1985
|
PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
MIL E 15090 : C
|
ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
MIL-P-28642 Base Document:1977
|
PAINT (TOPCOAT), VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
SSPC-PAINT 45 : 2013
|
TWO-COMPONENT, THICK-FILM POLYUREA AND POLYUREA/POLYURETHANE HYBRID COATINGS, PERFORMANCE-BASED |
SSPC-PAINT 29 : 2014
|
ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED |
ASTM D 5066 : 1991 : R1996 : EDT 1
|
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis |
MIL-C-82747 Base Document:1988
|
COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD |
MIL P 24441 : B
|
PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
TT-P-1565 Revision B:1978
|
PAINT, BOOT TOPPING BLACK |
MIL-S-53018 Base Document:1983
|
SEALER, WELD THROUGH FOR OVERLAPPING SURFACES |
SSPC-PAINT 24 : 2016
|
LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED |
ASTM C 733 : 1993
|
Standard Test Method for Volume Shrinkage of Latex Sealants (Withdrawn 2000) |
DOD-P-24655 Base Document:1985
|
PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
DOD E 1115 : C
|
ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
MIL-P-22298 Revision A:1985
|
PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) |
TT-P-650 Revision D:1988
|
PRIMER COATING, LATEX BASE, INTERIOR, WHITE (FOR GYPSUM WALLBOARD, OR PLASTER) |
MIL P 53084 : 0
|
PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
MIL-DTL-53022 Revision C Interim Revision:2007
|
PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
AASHTO MP 24 : 2015(R2018)
|
SPECIFICATION FOR WATERBORNE WHITE AND YELLOW TRAFFIC PAINTS |
MIL-DTL-53022 Revision E:2012
|
PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
ASTM D 6904 : 2003
|
Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
MIL-C-29475 Base Document:1994
|
COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
ASTM D 2697 : 2003
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM D 344 : 2011
|
Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts |
ASTM D 5066 : 1991 : R2011 : EDT 1
|
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis |
ASTM D 3065 : 2001 : R2006
|
Standard Test Methods for Flammability of Aerosol Products |
ASTM D 7489 : 2009 : R2013
|
Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
ASTM D 5913 : 1996 : R2009 : EDT 1
|
Standard Test Method for Evaluation of Cleanability of Paint Brushes |
ASTM D 4958 : 2010
|
Standard Test Method for Comparison of the Brush Drag of Latex Paints |
SSPC-PAINT 36 : 2013
|
TWO-COMPONENT WEATHERABLE ALIPHATIC POLYURETHANE TOPCOAT, PERFORMANCE-BASED |
ASTM D 961 : 1986 : R2001
|
Standard Specification for Dehydrated Castor Oil (Withdrawn 2007) |
ASTM D 5286 : 2001 : R2011
|
Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
ASTM E 1868 : 2010 : R2015
|
Standard Test Methods for Loss-On-Drying by Thermogravimetry |
ASTM D 3730 : 2017 : REDLINE
|
Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM F 940 : 1999 : R2009
|
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM D 2697 : 2003 : R2008
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM D 5066 : 1991 : R2005
|
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis |
ASTM D 5328 : 1992 : R1997
|
Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001) |
ASTM D 5913:1996
|
Standard Test Method for Evaluation of Cleanability of Paint Brushes |
ASTM D 6532 : 2000 : R2006
|
Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
ASTM F 718 : 2007 : R2011 : EDT 1
|
Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
ASTM D 5150 : 1992 : R2013
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM D 333 : 2001 : R2007
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 3925 : 2002
|
Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
NACE SP 01 08 : 2008
|
CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS |
DOD E 24607 : A
|
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) |
SAE AMS 3604 : 2015
|
HEAT RESISTANT ALUMINIZED PAINT |
MIL-P-53032 Base Document:1983
|
PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE |
MIL C 81904 : B
|
COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
ASTM D 6686 : 2001 : R2013
|
Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
AASHTO T 155 : 2013(R2017)
|
METHOD OF TEST FOR WATER RETENTION BY LIQUID MEMBRANE-FORMING CURING COMPOUNDS FOR CONCRETE |
CSA Z245.20 SERIES : 2014
|
PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
NACE TM 04 04 : 2004
|
Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation
|
MIL-DTL-53030 Revision B Interim Revision:2003
|
Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
MIL L 0046010 : D
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
DOD-E-18210 Revision B:1978
|
ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) |
MIL-P-22299 Revision B:1985
|
PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134) |
ASTM D 6904 : 2003 : R2013
|
Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
NASA MSFC SPEC 2083 : 2007
|
MULTIPROGRAM/PROJECT COMMON USE DOCUMENT FOAM, POLYURETHANE |
MIL-DTL-53030 Revision D:2011
|
Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
SSPC-PAINT 23 : 2013
|
LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED |
MIL-DTL-15090 Revision E:2010
|
ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
ASTM D 6532 : 2000
|
Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens |
ASTM D 6093 : 1997 : R2011
|
Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
ASTM D 7072 : 2004 : R2013
|
Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
AASHTO TP 102 : 2012
|
METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
MIL-P-85499 Base Document:1981
|
PRIMER MATERIAL |
MMM-A-180 Revision C:1979
|
ADHESIVE POLYVINYL ACETATE EMULSION |
ASTM D 5150 : 1992 : R2009
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
MIL-P-15931 Revision F:1991
|
PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
MIL-P-48333 Base Document:1974
|
PROPELLANT, LIQUID |
ASTM D 7680 : 2010
|
Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester |
MIL P 28641 : 0
|
PRIMER COATING, VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
GOST R 52714:2018
|
Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
ASTM F 718 : 2007
|
Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
SSPC-PS 26.00 : 2016
|
ALUMINUM-PIGMENTED EPOXY COATING SYSTEM MATERIALS STANDARD, PERFORMANCE-BASED |
ASTM D 1392 : 1992 : R1998
|
Standard Specification for Safflower Oil (Withdrawn 2007) |
ASTM D 1823 : 2016 : REDLINE
|
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer |
ASTM D 3323 : 1980 : R1988 : EDT 1
|
Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
ASTM D 4213 : 2008
|
Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
ASTM D 2697 : 2003 : R2014
|
Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
ASTM D 4213 : 2008 : R2012
|
Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
ASTM D 333 : 2001 : R2013
|
Standard Guide for Clear and Pigmented Lacquers |
SSPC-PAINT 46 : 2015
|
ELASTOMERIC, WATER BASED, HIGH BUILD, FLAT, PERFORMANCE-BASED COATING FOR MASONRY AND CONCRETE |
ASTM D 4142 : 1989 : R2001
|
Standard Guide for Testing Epoxy Resins |
ASTM F 718 : 2007 : R2017
|
Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
ASTM D 4712 : 1987 : REV A : R1996
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 5286 : 2001 : R2005
|
Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
ASTM D 7073 : 2005 : R2012
|
Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
ASTM D 5201 :2005
|
Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
ASTM D 6266 : 2000 : REV A : R2017
|
Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
ASTM D 7489 : 2009 : R2017
|
Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
ASTM D 2336 : 1999
|
Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008) |
ASTM C 461 : 2017 : REDLINE
|
Standard Test Methods for Mastics and Coatings Used With Thermal Insulation |
MIL-PRF-62218 Revision B:1996
|
CORROSION PREVENTIVE COMPOUNDS, COLD APPLICATION (FOR NEW AND FIELD MOTOR VEHICLES AND TRAILERS) |
MIL-PRF-24596 Revision B:2009
|
COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
ASTM D 5860 : 1995 : R2013
|
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
MIL-A-81253 Base Document:1965
|
ADHESIVE, MODIFIED EPOXY RESIN WITH POLYAMINE CURING AGENT |
MIL-PRF-47257 Revision F:2010
|
COMPOUND, EPOXY, FILAMENT WINDING |
MIL-P-47276 Revision B:1991
|
PRIMER, BONDING |
MIL-P-7962 Revision D:1980
|
PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
TT-P-002119 Base Document:1980
|
PAINT, LATEX BASE, HIGH TRAFFIC AREA, FLAT AND EGGSHELL FINISH (LOW LUSTRE), (FOR INTERIOR USE) |
SAE AMS 3117 : 2011
|
PRIMER ZINC MOLYBDATE |
TT-C-499 Revision A:1975
|
COATING COMPOUND, CHEMICAL RESISTANT, CLEAR |
TT-C-530 Revision C:1995
|
COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE |
NACE SP 01 09 : 2009
|
FIELD APPLICATION OF BONDED TAPE COATINGS FOR EXTERNAL REPAIR, REHABILITATION, AND WELD JOINTS ON BURIED METAL PIPELINES |
MIL L 46010 : D
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
ASTM D 6763 : 2016 : REDLINE
|
Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
MIL-P-20088 Revision C:1986
|
PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST |
DOD P 24647 : A (2)
|
PAINT, ANTIFOULING, SHIP HULL (METRIC) |
MIL-PRF-14105 Revision E:2011
|
PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
MIL P 15183 : B NOTICE 1
|
PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
ASTM D 4142 : 1989 : R1996 : EDT 1
|
Standard Guide for Testing Epoxy Resins |
MIL P 24647 : B
|
PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
ASTM D 3069 : 1994 : R2013
|
Standard Test Method for Delivery Rate of Aerosol Products (Withdrawn 2022) |
ASTM D 115 : 2017 : REDLINE
|
Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
TT-P-1511 Revision B:1981
|
PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
ASTM D 6904 : 2003 : R2007
|
Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
ASTM D 5286 : 2001
|
Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
SAE AMS 3146 : 2000
|
COATING, INTERIOR AIRCRAFT CABIN LOW HEAT AND SMOKE RELEASE |
ASTM D 4712 : 1987 : REV A : R2001
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 16 : 2016 : REDLINE
|
TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS |
ASTM D 5150 : 1992 : R1997 : EDT 1
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM D 1462 : 1992 : R1998
|
Standard Specification for Refined Soybean Oil (Withdrawn 2007) |
ASTM D 3806 : 1998
|
Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
ASTM D 4142 : 1989 : R2009
|
Standard Guide for Testing Epoxy Resins |
ASTM D 6237 : 2009
|
Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
ASTM D 7768 : 2012
|
Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography |
ASTM D 3065 : 2001
|
Standard Test Methods for Flammability of Aerosol Products |
ASTM D 5201 : 2005 : REV A : R2014
|
Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
ASTM D 333 : 2001
|
Standard Guide for Clear and Pigmented Lacquers |
SSPC-PAINT 39 : 2015
|
TWO-COMPONENT ALIPHATIC POLYUREA TOPCOAT, FAST- OR MODERATE-DRYING, PERFORMANCE-BASED |
ASTM D 5150 : 1992 : R2003
|
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM D 5324 : 2016 : REDLINE
|
Standard Guide for Testing Water-Borne Architectural Coatings |
ASTM D 6686 : 2001 : R2008 : EDT 2
|
Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings |
GOST 849:2018
|
Primary nickel. SpecificationsE |
DOD-C-24654 Base Document:1985
|
COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) |
ASTM F 940 : 1999 : R2005
|
Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
AASHTO TP 102 : 2012 : R2015
|
METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
NACE TM 03 04 : 2004
|
OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION |
MIL-C-81947 Revision A:1975
|
COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT |
ASTM D 2452 : 2015 : REDLINE
|
Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
TT-C-001951 Base Document:1976
|
COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE |
ASTM D 3288 : 2003
|
Standard Test Methods for Magnet-Wire Enamels |
ASTM D 7088 : 2017
|
Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
DOD-E-699 Revision D:1978
|
ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC) |
DOD-E-698 Revision C:1978
|
ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) |
AASHTO R 31 : 2009 : R2014
|
PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
NACE TM 02 04 : 2004
|
EXTERIOR PROTECTIVE COATINGS FOR SEAWATER IMMERSION SERVICE |
DOD-P-15146 Revision B:1977
|
PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) |
ASTM D 3806 : 1998 : R2011
|
Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
MIL E 15145 : C
|
ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
MIL-A-82842 Base Document:1983
|
ADHESIVE, CONDUCTIVE, LOW RESISTIVITY |
MIL-A-47284 Revision A:1991
|
ADHESIVE, EPOXY RESIN BASE |
MIL-PRF-24647 Revision E:2013
|
PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
ASTM D 8163 : 2017
|
Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings |
ASTM D 3288/D3288M : 2015 : REDLINE
|
Standard Test Methods for Magnet-Wire Enamels |
MIL-N-48263 Base Document:1974
|
1-NITRO-2-PROPANOL (NPL) |
ASTM D 3806 : 1998 : R2016
|
Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
SAE AMS 3167 : 2005
|
SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
ASTM D 2932 : 1980 : R1988 : EDT 1
|
Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
ASTM D 2805 : 2011
|
Standard Test Method for Hiding Power of Paints by Reflectometry |
ASTM D 7072 : 2004 : R2009
|
Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
NACE TM 01 04 : 2004
|
OFFSHORE PLATFORM BALLAST WATER TANK COATING SYSTEM EVALUATION |
ASTM D 6266 : 2000 : REV A : R2011
|
Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
ASTM D 6266 : 2000 : REV A : R2005
|
Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
ASTM D 3925 : 2002 : R2015
|
Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
ASTM D 6093 : 1997
|
Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
ASTM D 4712 : 1987 : REV A : R2005
|
Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
ASTM D 6511/D6511M : 2011-07
|
TEST METHODS FOR SOLVENT BEARING BITUMINOUS COMPOUNDS |
ASTM D 2205 : 2015 : REDLINE
|
Standard Guide for Selection of Tests for Traffic Paints |
ASTM E 1797 : 2012 : R2017 : EDT 1
|
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 5201 : 2005 : REV A : R2010
|
Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
ASTM D 4143 : 2016 : REDLINE
|
Standard Guide for Testing Latex Vehicles |
ASTM D 4958 : 2010 : R2016
|
Standard Test Method for Comparison of the Brush Drag of Latex Paints |
ASTM D 1641 : 2004
|
Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013) |