ISO 8502-3:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
ISO 11126-9:1999
|
Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 9: Staurolite |
SSPC-SP 12 : 2002
|
SURFACE PREPARATION AND CLEANING OF METALS BY WATERJETTING PRIOR TO RECOATING |
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
NACE SP 01 88 : 2006
|
DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
ISO 3549:1995
|
Zinc dust pigments for paints — Specifications and test methods |
ASTM A 123/A123M : 2017 : REDLINE
|
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
ISO 11124-3:1993
|
Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 3: High-carbon cast-steel shot and grit |
ISO 11126-8:1993
|
Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 8: Olivine sand |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
SSPC-SP 11 : 2012
|
POWER-TOOL CLEANING TO BARE METAL |
ISO 11126-4:1993
|
Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
SSPC-SP 10 : 2015
|
NEAR-WHITE BLAST CLEANING |
CFR 40(PTS260-265) : JUL 2017
|
PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
ASTM D 4285 : 1983 : R2018
|
Standard Test Method for Indicating Oil or Water in Compressed Air |
NACE RP 01 76 : 2003
|
CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
NACE SP 01 76 : 2007
|
CORROSION CONTROL OF SUBMERGED AREAS OF PERMANENTLY INSTALLED STEEL OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
ASTM A 380 : 2006
|
Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
NACE TM 04 04 : 2004
|
Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation
|
ISO 11126-10:2017
|
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
NACE 6G198 : 0
|
WET ABRASIVE BLAST CLEANING |
NACE TM 01 04 : 2004
|
OFFSHORE PLATFORM BALLAST WATER TANK COATING SYSTEM EVALUATION |
NACE 4 : 2007
|
BRUSH-OFF BLAST CLEANING |
NACE 12 : 2003
|
SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
ASTM D 2794 : 1993
|
TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
NACE 5 : 2002
|
SURFACE PREPARATION AND CLEANING OF METALS BY WATERJETTING PRIOR TO RECOATING |
ISO 8502-6:2006
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
ISO 8502-9:1998
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts |
NACE TM 03 04 : 2004
|
OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION |
NACE TM 02 04 : 2004
|
EXTERIOR PROTECTIVE COATINGS FOR SEAWATER IMMERSION SERVICE |
SSPC-SP 5 : 2015
|
WHITE METAL BLAST CLEANING |
ASTM D 1475 : 2013 : REDLINE
|
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
ASTM D 522 : 1993 : REV A
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
NACE RP 02 87 : 2002
|
FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE |
ISO 8503-5:2017
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
ASTM B 479 : 2006
|
Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications (Withdrawn 2015) |
MIL-PRF-23236 Revision D:2009
|
Coating Systems for Ship Structures |
SSPC-SP 7 : 2015
|
BRUSH-OFF BLAST CLEANING |