ASTM D 1693 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
Available format(s)
PDF
Superseded date
05-11-2021
Superseded by
Language(s)
English
Published date
01-05-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 08.01, 2015 Defines the determination of the susceptibility of ethylene plastics, as defined in Terminology D 883, to environmental stress-cracking when subjected to the conditions herein specified.
| Committee |
D 20
|
| DocumentType |
Redline
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the determination of the susceptibility of ethylene plastics, as defined in Terminology D883, to environmental stress-cracking when subjected to the conditions herein specified. Under certain conditions of stress and in the presence of environments such as soaps, wetting agents, oils, or detergents, ethylene plastics may exhibit mechanical failure by cracking.
1.2The values stated in SI units are to be regarded as standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 1:There is no known ISO equivalent to this standard.
| 02/106432 DC : DRAFT NOV 2002 | PREN 14576 - GEOSYNTHETICS - TEST METHOD FOR DETERMINING THE RESISTANCE OF POLYMERIC GEOSYNTHETIC BARRIERS TO ENVIRONMENTAL STRESS CRACKING |
| BS EN 1993-1-11 NA : 2006 | UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| NFA 49 710 : 1988 | STEEL TUBES - EXTERNAL COATING WITH THREE POLYETHYLENE BASED COATING - APPLICATION THROUGH EXTRUSION |
| BS 6469:1984 | Methods of test for insulation and sheaths of electric cables |
| ASTM D 2295 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2293 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA Z245.20 SERIES : 2014 | PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
| CSA Z245.20-Z245.21 : 2006 | EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE |
| ASTM D 3554 : 2007 : R2018 | Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation |
| ASTM D 2293 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| NACE TM 01 96 : 0 | CHEMICAL RESISTANCE OF POLYMERIC MATERIALS BY PERIODIC EVALUATION |
| AWWA M55 : 1 | PE PIPE - DESIGN AND INSTALLATION |
| ASTM D 2294 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2318 : 1998 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA C68.5 : 2013 | SHIELDED AND CONCENTRIC NEUTRAL POWER CABLE FOR DISTRIBUTION UTILITIES |
| UNE-EN ISO 17855-2:2016 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
| ASTM D 2300 : 2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| AASHTO M 252 : 2009 | SPECIFICATION FOR CORRUGATED POLYETHYLENE DRAINAGE PIPE |
| CSA B66 : 2016 | DESIGN, MATERIAL, AND MANUFACTURING REQUIREMENTS FOR PREFABRICATED SEPTIC TANKS AND SEWAGE HOLDING TANKS |
| ASTM D 3554 : 2007 : R2013 | Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation |
| NACE RP 03 04 : 2004 | DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES |
| ASTM F 810 : 2012 : R2018 | Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
| BS EN ISO 23667:2007 | Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| BS EN 14576:2005 | Geosynthetics. Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
| DIN EN ISO 1872-2:2000-12 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
| EN ISO 23667:2007 | Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007) |
| DIN EN 14576:2005-07 | Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking; German version EN 14576:2005 |
| 14/30304058 DC : 0 | BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ASTM D 1998 : 2015 : REDLINE | Standard Specification for Polyethylene Upright Storage Tanks |
| 11/30237918 DC : 0 | BS EN ISO 13274 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS |
| CSA C22.2 No. 0.3 :2009 | TEST METHODS FOR ELECTRICAL WIRES AND CABLES |
| ASTM D 2293 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| I.S. EN ISO 13274:2013 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013) |
| ASTM D 2318 : 1998 : R2003 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2293 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2303 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2296 : 2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA Z662 PACKAGE : 2011 | CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS |
| ASTM D 2295 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| SAE AIR 1269C : 2011 | MOLDED RIGID PLASTIC PARTS |
| ASTM F 1533 : 2001 | Standard Specification for Deformed Polyethylene (PE) Liner |
| ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| ASTM D 2308 :2007 | Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ASTM D 7436 : 2017 : REDLINE | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
| ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
| ASTM F 2896 : 2011 : R2017 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| DIN EN ISO 23667:2007-10 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING |
| DIN EN ISO 22088-1:2006-11 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance (ISO 22088-1:2006) |
| BS EN ISO 1872-2:2007 | Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| CSA C22.2 No. 249 : 1996 : R2011 | STANDARD TESTS FOR DETERMINING COMPATIBILITY OF CABLE-PULLING LUBRICANTS WITH WIRE AND CABLE |
| CSA C22.2 No. 249 : 1996 : R2015 | STANDARD TESTS FOR DETERMINING COMPATIBILITY OF CABLE-PULLING LUBRICANTS WITH WIRE AND CABLE |
| NEMA WC 55 : 1992(R1999) | INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
| WC 3-1992 | RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
| AASHTO R 63 : 2013 | PRACTICE FOR SOLID WALL HIGH-DENSITY POLYETHYLENE (HDPE) CONDUIT FOR NON-PRESSURE APPLICATIONS USED FOR THE PROTECTION OF POWER AND TELECOMMUNICATIONS CABLES |
| NEMA TC 5 : 1990 | CORRUGATED POLYOLEFIN COILABLE PLASTIC UTILITIES DUCT |
| DD CEN/TS 14541:2007 | Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials |
| ASTM D 2310 : 2006 : R2012 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| L-C-530 Revision C:1987 | COATING, PIPE, THERMOPLASTIC RESIN |
| ASTM D 2288 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| I.S. EN ISO 16101:2004 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING |
| ASTM D 4565 : 2015 : REDLINE | Standard Test Methods for Physical and Environmental Performance Properties of <brk/>Insulations and Jackets for Telecommunications Wire and Cable |
| 08/30154948 DC : DRAFT FEB 2008 | BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE) |
| BS EN ISO 17855-2:2016 | Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
| ASTM D 2300 : 2008 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| DIN EN ISO 13274:2014-06 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013 + COR. 1:2014) |
| ASTM D 2319/D2319M : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| UNI EN ISO 23936-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| BS EN ISO 13274:2013 | Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs |
| 04/301931 DC : DRAFT JAN 2004 | ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| ASTM D 2303 : 1997 : R2004 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3554 : 2007 | Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation |
| AWWA C215 : 2016 | EXTRUDED POLYOLEFIN COATINGS FOR STEEL WATER PIPE |
| ASTM F 1533 : 2001 : R2009 | Standard Specification for Deformed Polyethylene (PE) Liner (Withdrawn 2018) |
| 08/30128144 DC : DRAFT APR 2008 | BS EN 1993-1-11 - UK NATIONAL ANNEX TO EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| PD 6533:1993 | Guide to methods for assessing the durability of geotextiles. An interim document |
| CSA B137 COMPENDIUM : 2017 | THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
| ASTM D 2318 : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| I.S. EN ISO 17855-2:2016 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
| UNI EN ISO 21809-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| CSA C22.2 No. 0.3 : 2009 : R2014 | TEST METHODS FOR ELECTRICAL WIRES AND CABLES |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| SAE J 2642 : 2017 | RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS |
| CSA B1800 SERIES : 2015 | THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM |
| ASTM D 2308 : 2007 : R2013 | Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| DIN EN ISO 16101:2004-12 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING |
| ISO 13274:2013 | Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs |
| ISO 17855-2:2016 | Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
| ASTM D 3485 : 2015 | Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC) |
| ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| UNI EN ISO 13628-2 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| CSA B182.7 : 2006 | PSM TYPE MULTILAYER POLYVINYLCHLORIDE (PVC) SEWER PIPE HAVING REPROCESSED-RECYCLED CONTENT |
| ASTM D 2296 : 2001 : R2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| SAE AMS L P 390 : 2000 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) |
| ASTM D 2310 : 2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| I.S. EN ISO 23667:2007 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING |
| ASTM F 1248 : 1996 | Standard Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe |
| ASTM F 810 : 2012 | Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
| ASTM D 2308 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| I.S. EN ISO 21809-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| MIL-P-51431 Revision A:1988 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE BUTENE 1 COPOLYMER, HIGH DENSITY |
| I.S. EN ISO 1872-2:2007 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ICEA S56.434 : 83(R1991) | POLYOLEFIN INSULATED COMMUNICATIONS CABLES FOR OUTDOOR USE |
| ASTM D 2854 : 1996 : R2000 | Standard Test Method for Apparent Density of Activated Carbon |
| L-P-390 Revision C:1971 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY) |
| BS EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics |
| 04/30078970 DC : DRAFT OCT 2004 | ISO 22088-1 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 1: GENERAL GUIDANCE |
| ASTM D 2294 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2307 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| BS EN ISO 21809-1:2011 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP) |
| UNE-EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| ASTM D 7082 : 2015 : REDLINE | Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe |
| ASTM PS 20 : 1995 | Withdrawn 1997 |
| ISO 21809-4:2009 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE) |
| BS EN ISO 16101:2004 | Packaging. Transport packaging for dangerous goods. Plastics compatibility testing |
| ISO 23667:2007 | Packaging Transport packaging for dangerous goods Rigid plastics and plastics composite IBCs Compatibility testing |
| BS EN ISO 22088-1:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) General guidance |
| ISO 16101:2004 | Packaging Transport packaging for dangerous goods Plastics compatibility testing |
| ISO 22088-1:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance |
| UNE-EN ISO 13274:2014 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013) |
| ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
| ISO 13628-2:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| EN ISO 17855-2:2016 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
| EN ISO 1872-2:2007 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007) |
| EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) |
| EN 14576:2005 | Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking |
| EN ISO 22088-1:2006 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance (ISO 22088-1:2006) |
| CSA C68.10 : 2014 | SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV |
| ASTM D 2308 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| BS ISO 21809-4:2009 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE) |
| ANSI/AWWA C229 : 2015 | FUSION-BONDED POLYETHYLENE COATINGS FOR STEEL WATER PIPE AND FITTINGS |
| ASTM D 2319/D2319M : 1998 : R2008e1 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| DIN EN ISO 17855-2:2016-06 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
| ASTM D 2307 : 2007A | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| 07/30150249 DC : 0 | BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| MIL-P-51432 Revision A:1988 | PLASTIC SHEET, POLYETHYLENE COPOLYMER |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| ASTM D 2307 : 2007A : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2294 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2307 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2301 : 2010 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2292 : 1985 | Recommended Practice for Compression Molding Test Specimens of Styrene-Butadiene Molding and Extrusion Materials (Withdrawn 1992) |
| ASTM D 2301 : 2010 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM F 2718 : 2009 : R2015 | Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022) |
| ISO/TS 18226:2006 | Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| I.S. EN ISO 23936-1:2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| ASTM F 2718 : 2009 | Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines |
| CSA C22.2 NO. 129:10 (R2019) | Neutral-supported cables |
| ASTM F 2160 : 2016 | Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) |
| ASTM F 2896 : 2011 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ASTM D 2854 : 2009 : R2014 | Standard Test Method for Apparent Density of Activated Carbon |
| ISO 21809-1:2011 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) |
| ISO 1872-2:2007 | Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| EN ISO 16101:2004 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO 16101:2004) |
| BS 8081:1989 | Code of practice for ground anchorages |
| ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
| DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| BS 6469:1990 | Methods of test for insulation and sheaths of electric cables |
| ASTM D 1204 : 2014 : REDLINE | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
| ASTM D 4703 : 2016 : REDLINE | Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.