![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 2244 : 1993 : R2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
Hardcopy , PDF
11-11-2014
English
10-07-2000
Committee |
E 12
|
DocumentType |
Test Method
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1 This test method covers the calculation, from instrumentally measured color coordinates based on daylight illumination, of small color differences between nonfluorescent, nonmetameric, opaque specimens such as painted panels. (Where it is suspected that the specimens may be metameric, that is, possess different spectral curves though visually alike in color, Practices D1729 and D4086 should be used to verify instrumental results.) The color differences determined by these procedures are expressed in terms of approximately uniform visual color perception in CIE 1976 CIELAB opponent-color space (1), Hunter LH,aH, bH opponent-color space (2), and the Friele-MacAdam-Chickering (FMC-2) color space (3).
1.2 For product specification, the permissible color difference between test specimen and reference and the procedure for calculating the color difference shall be agreed upon by the purchaser and the seller. Specific color tolerances may be required for each material and condition of use since other appearance factors (for example, proximity, gloss, and texture) may affect the correlation between the magnitude of a measured color difference and its commercial acceptability.
1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 5326 : 1994 : REV A : R2013 | Standard Test Method for Color Development in Tinted Latex Paints |
ASTM D 2276 : 2006 : R2014 | Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
ASTM E 1348 : 2015 : EDT 1 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
ASTM D 6695 : 2016 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
ASTM C 1376 : 2015 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
ASTM C 1649 : 2014 | Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated |
ASTM C 1364 : 2018 | Standard Specification for Architectural Cast Stone |
ASTM F 1945 : 2005 : R2011 | Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting (Withdrawn 2020) |
ASTM F 2408 : 2016 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
ASTM G 178 : 2016 | Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
ASTM F 2037 : 2000 : R2011 | Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments (Withdrawn 2020) |
ASTM D 7270 : 2007 : R2013 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
ASTM E 2867 : 2014 : R2019 | Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry |
ASTM D 5324 : 2016 | Standard Guide for Testing Water-Borne Architectural Coatings |
ASTM D 5319 : 2017 | Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
ASTM E 2214 : 2019 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
ASTM F 925 : 2013 | Standard Test Method for Resistance to Chemicals of Resilient Flooring |
ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 6901 : 2015 | Standard Specification for Artists' Colored Pencils |
ASTM E 3040 : 2018 | Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale |
ASTM D 7990 : 2015 | Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding |
ASTM D 5215 : 1993 : R2012 | Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
ASTM G 201 : 2016 | Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation |
ASTM D 3730 : 2017 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM F 2366 : 2012 | Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus (Withdrawn 2020) |
ASTM F 1514 : 2003 : R2013 | Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change |
ASTM C 1501 : 2019 | Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
ASTM F 940 : 1999 : R2013 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
ASTM D 2066 : 2007 : R2012 | Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
ASTM D 6290 : 2019 | Standard Test Method for Color Determination of Plastic Pellets |
ASTM E 2808 : 2011 | Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis |
ASTM D 5382 : 2002 : R2017 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM F 2035 : 2000 : R2011 | Standard Practice for Measuring the Dark Stability of Ink Jet Prints (Withdrawn 2020) |
ASTM F 934 : 1996 : R2017 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM F 1515 : 2015 | Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change |
ASTM C 1510 : 2001 : R2016 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
ASTM D 4477 : 2016 | Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
ASTM C 744 : 2016 | Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units |
ASTM E 1247 : 2012 : R2017 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
ASTM F 1206 : 1994 : R2011 : EDT 1 | Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers (Withdrawn 2020) |
ASTM D 3679 : 2017 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
ASTM D 7793 : 2017 | Standard Specification for Insulated Vinyl Siding |
ASTM D 7195 : 2016 : REV A | Standard Guide for Setting Object Color Specifications |
ASTM E 308 : 2018 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
ASTM D 5531 : 2017 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
ASTM D 868 : 2010 : R2015 | Standard Practice for Determination of Degree of Bleeding of Traffic Paint |
ASTM D 387 : 2000 : R2017 | Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023) |
ASTM F 2589 : 2016 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
ASTM A 755/A755M : 2018 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
ASTM D 4141/D4141M : 2014 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
ASTM D 2745 : 2000 : R2017 | Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
ASTM D 3424 : 2011 | Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter (Withdrawn 2020) |
ASTM E 2301 : 2012 : R2017 | Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry |
ASTM D 4302 : 2014 | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
ASTM D 4587 : 2011 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
ASTM D 5452 : 2012 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM D 5150 : 1992 : R2017 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM E 1331 : 2015 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
ASTM F 2957 : 2013 : R2019 : EDT 1 | Standard Specification for Ornamental Aluminum Fence Systems |
ASTM D 7445 : 2018 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
ASTM C 1650 : 2014 | Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated |
ASTM D 2205 : 2015 | Standard Guide for Selection of Tests for Traffic Paints |
ASTM C 1520 : 2002 : R2015 : EDT 1 | Standard Guide for Paintability of Latex Sealants |
ASTM D 2248 : 2001 : REV A : R2018 | Standard Practice for Detergent Resistance of Organic Finishes |
ASTM D 2985/D2985M : 1992 : R2019 | Standard Test Method for Color of Asbestos (Withdrawn 2022) |
ASTM D 3134 : 2015 | Standard Practice for Establishing Color and Gloss Tolerances |
ASTM D 279 : 2002 : R2019 | Standard Test Methods for Bleeding of Pigments |
ASTM D 4726 : 2018 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors |
ASTM E 991 : 2016 | Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
ASTM D 4674 : 2019 | Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
ASTM E 1347 : 2006 : R2015 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
ASTM D 4459 : 2012 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications |
ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 333 : 2001 : R2013 | Standard Guide for Clear and Pigmented Lacquers |
ASTM D 6763 : 2016 | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
ASTM D 7856 : 2015 : REV A | Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space |
ASTM E 1345 : 1998 : R2019 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
ASTM D 4303 : 2010 : R2016 | Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
ASTM D 3022 : 1984 : R2011 | Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill (Withdrawn 2020) |
ASTM D 5031/D5031M : 2013 : R2018 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
ASTM D 1014 : 2018 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
ASTM D 6531 : 2000 : R2019 | Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement |
ASTM E 1349 : 2006 : R2018 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
ASTM D 2454 : 2018 | Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
ASTM D 3361/D3361M : 2013 : R2018 | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
ASTM D 5146 : 2010 : R2019 | Standard Guide to Testing Solvent-Borne Architectural Coatings |
ASTM C 609 : 2007 : R2019 | Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile |
ASTM D 822/D822M : 2013 : R2018 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
ASTM D 1148 : 2013 : R2018 | Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.